Avantco WB8L 2.1 گیلن (8 لیٹر) واٹر بوائلر ہدایت نامہ

تعارف

This instruction manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Avantco WB8L 2.1 Gallon (8 Liter) Water Boiler. Please read this manual thoroughly before initial use and retain it for future reference. This appliance is designed for commercial use to heat and dispense hot water.

اہم حفاظتی معلومات

انتباہ: آگ، برقی جھٹکا، یا چوٹ کے خطرے کو کم کرنے کے لیے، برقی آلات استعمال کرتے وقت ہمیشہ بنیادی حفاظتی احتیاطی تدابیر پر عمل کریں۔

• آلات کو چلانے سے پہلے تمام ہدایات پڑھیں۔
• Ensure the appliance is connected to a properly grounded 120V, 1500W electrical outlet. Do not use extension cords.
• آلات، ڈوری، یا پلگ کو پانی یا دیگر مائعات میں نہ ڈوبیں۔
• Always unplug the appliance from the outlet when not in use, before cleaning, or before attempting any maintenance.
• کسی بھی آلات کو خراب شدہ ڈوری یا پلگ سے، یا آلے ​​کی خرابی کے بعد یا کسی بھی طریقے سے نقصان پہنچانے کے بعد نہ چلائیں۔
• Keep hands and face away from the steam vent and dispensing spout during operation, as hot steam and water can cause severe burns.
• Place the appliance on a stable, level, heat-resistant surface, away from walls and combustible materials.
• ڈوری کو میز یا کاؤنٹر کے کنارے پر لٹکنے نہ دیں، یا گرم سطحوں کو چھونے نہ دیں۔
• یہ آلات کم جسمانی، حسی، یا دماغی صلاحیتوں، یا تجربے اور علم کی کمی والے افراد (بشمول بچوں) کے استعمال کے لیے نہیں ہے، جب تک کہ ان کی حفاظت کے لیے ذمہ دار کسی شخص کی طرف سے آلات کے استعمال سے متعلق نگرانی یا ہدایات نہ دی گئی ہوں۔ .

سیٹ اپ

1. پیک کھولنا: Carefully remove the water boiler from its packaging. Retain packaging for future storage or shipping.
2. ابتدائی صفائی: Before first use, wash the interior of the boiler and the lid with warm, soapy water. Rinse thoroughly with clean water. Wipe the exterior with a damp کپڑا
3. جگہ کا تعین: Place the water boiler on a stable, level, and heat-resistant surface. Ensure there is adequate clearance around the unit for ventilation and to prevent heat damage to surrounding surfaces. Do not place near flammable materials.
4. پاور کنکشن: یقینی بنائیں کہ پاور سوئچ 'آف' پوزیشن میں ہے۔ پاور کورڈ کو گراؤنڈ 120V، 1500W الیکٹریکل آؤٹ لیٹ میں لگائیں۔

تصویر: سامنے view of the Avantco WB8L Water Boiler, showing the water level indicator and dispensing spigot.

تصویر: پیچھے view of the Avantco WB8L Water Boiler, showing the power cord, temperature control dial, and power switch.

آپریٹنگ ہدایات

1. Filling the Boiler: Remove the lid and fill the boiler with cold water. Do not fill above the 'MAX' line indicated on the water level gauge. Ensure the lid is securely replaced after filling.
2. پاور آن: Turn the power switch to the 'ON' position. The 'Heating' indicator light will illuminate, signifying that the water is beginning to heat.
3. حرارتی عمل: The 1500W heating element provides rapid boiling. The water will heat to the desired temperature set by the temperature control dial. Once the water reaches the set temperature, the 'Heating' light may cycle on and off to maintain the temperature.
4. درجہ حرارت کنٹرول: Use the temperature control dial located on the back of the unit to adjust the desired water temperature. Turn clockwise to increase temperature, counter-clockwise to decrease.
5. گرم پانی کی فراہمی: To dispense hot water, place a cup or container under the dispensing spigot and push the lever down. Release the lever to stop the flow of water.
6. گرم فنکشن رکھیں: The unit is designed to maintain the water at the set temperature once it has reached boiling point, ensuring hot water is always available. The 'Keep Warm' indicator light will illuminate when this function is active.
7. پاور آف کرنا: When finished, turn the power switch to the 'OFF' position and unplug the unit from the electrical outlet. Allow the unit to cool completely before handling or cleaning.

Image: The Avantco WB8L Water Boiler positioned on a counter, ready for use, with a cup nearby.

دیکھ بھال اور صفائی

Regular cleaning and maintenance will ensure the longevity and optimal performance of your water boiler.

• روزانہ صفائی: After each use, ensure the unit is unplugged and completely cool. Empty any remaining water. Wipe the exterior with a damp cloth. Clean the drip tray if present.
• داخلہ کی صفائی: For the interior, the product care instructions state "Hand wash, Wipe clean". Use warm, soapy water and a soft brush or sponge to clean the inside. Rinse thoroughly.
• ڈیسکلنگ: Mineral deposits (limescale) can build up over time, especially in hard water areas, affecting performance. Descale the unit regularly (e.g., monthly or as needed based on water hardness).
  To descale: Fill the boiler with a solution of equal parts white vinegar and water. Let it sit for 30-60 minutes (do not heat). For heavy buildup, you may gently heat the solution for a short period (do not boil dry). Drain the solution and rinse the interior thoroughly several times with fresh water to remove any vinegar residue.
• سپگوٹ کی صفائی: Ensure the dispensing spigot is free of blockages. If necessary, disassemble and clean according to manufacturer guidelines (if applicable).
• ذخیرہ: When not in use for extended periods, ensure the unit is clean, dry, and stored in a cool, dry place.

خرابی کا سراغ لگانا

If you encounter issues with your Avantco WB8L Water Boiler, refer to the following common problems and solutions:

وضاحتیں

• ماڈل: WB8L
• صلاحیت: 2.1 گیلن (8 لیٹر)
• والیومtage: 120V
• واٹtage: 1500W
• رنگ: چاندی
• خصوصی خصوصیت: تیز ابلنا
• مصنوعات کی دیکھ بھال کی ہدایات: ہاتھ دھونا، صاف کرنا

وارنٹی اور سپورٹ

For information regarding the warranty of your Avantco WB8L Water Boiler, please refer to the warranty card included with your purchase or contact the retailer or manufacturer directly. Warranty terms and conditions may vary.

For technical support, replacement parts, or service inquiries, please contact Avantco customer service. Contact information can typically be found on the manufacturer's webسائٹ یا مصنوعات کی پیکیجنگ پر۔