1. تعارف
Thank you for choosing the PowerWalker VI 3000 SCL FR Uninterruptible Power Supply (UPS). This device is designed to provide reliable power protection for your electronic equipment against power outages, surges, and spikes. It ensures continuous operation and safeguards your valuable data and hardware.
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your UPS. Please read it thoroughly before using the product and keep it for future reference.
Figure 1.1: PowerWalker VI 3000 SCL FR UPS
This image shows the PowerWalker VI 3000 SCL FR UPS from an angled front perspective, highlighting its compact black casing and the front display panel.
2. حفاظتی ہدایات
Please observe the following safety precautions to ensure safe operation and to prevent damage to the UPS or connected equipment.
- برقی حفاظت: UPS نہ کھولیں casing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel. Ensure the UPS is connected to a grounded power outlet.
- جگہ کا تعین: Place the UPS in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Do not block ventilation openings.
- بیٹری کی حفاظت: The UPS contains internal batteries. Do not dispose of batteries in a fire, as they may explode. Do not open or mutilate batteries. Electrolyte is harmful to the skin and eyes.
- اوورلوڈ: Do not overload the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's rated capacity (1800W).
3. پیکیج کے مشمولات
Carefully unpack the UPS and check the contents of the package. You should find the following items:
- PowerWalker VI 3000 SCL FR UPS Unit
- صارف دستی (یہ دستاویز)
- USB Cable (for HID driver communication)
- پاور کورڈ
اگر کوئی چیز غائب یا خراب ہو تو براہ کرم اپنے ڈیلر سے فوری رابطہ کریں۔
4. پروڈکٹ ختمview
4.1 فرنٹ پینل
Figure 4.1: Front Panel of the UPS
This image displays the front panel of the PowerWalker VI 3000 SCL FR UPS, showing the LCD display and the power button.
- LCD ڈسپلے: Shows real-time status information such as input/output voltage, battery level, load capacity, and various operational modes.
- پاور بٹن: Used to turn the UPS ON or OFF.
4.2 پیچھے والا پینل
Figure 4.2: Rear Panel of the UPS
This image illustrates the rear panel of the PowerWalker VI 3000 SCL FR UPS, detailing the various input/output ports and sockets.
- COM.PORT (RS-232): Serial communication port for monitoring software.
- USB پورٹ: USB communication port for monitoring software and HID driver functionality.
- Output Sockets (French Type): Connect your critical equipment here. These outlets provide battery backup and surge protection.
- ان پٹ پاور کورڈ: Connects the UPS to the utility power outlet.
- RJ11/RJ45 Protection (IN/OUT): Provides surge protection for telephone/network lines.
- ری سیٹ بٹن: Used to reset the UPS in certain error conditions.
5. سیٹ اپ
5.1 جگہ کا تعین
Choose a suitable location for your UPS:
- UPS کو فلیٹ، مستحکم سطح پر رکھیں۔
- Ensure adequate airflow around the unit. Maintain at least 10 cm (4 inches) clearance from walls or other obstructions.
- Avoid areas with excessive dust, humidity, or extreme temperatures.
5.2 پاور سے جڑنا۔
- Connect the UPS input power cord to a grounded wall outlet.
- Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery runtime. The UPS will charge whether it is turned ON or OFF.
5.3 کنیکٹنگ کا سامان
- Plug your computer, monitor, and other critical devices into the output sockets on the rear panel of the UPS.
- Do not connect laser printers or shredders to the UPS, as their high surge current during startup may overload the unit.
- For network/telephone line protection, connect your modem/router to the RJ11/RJ45 IN port and then connect the OUT port to your device.
6. آپریٹنگ
6.1 Turning the UPS ON/OFF
- آن کرنے کے لیے: Press and hold the power button on the front panel for approximately 3 seconds until you hear a beep and the LCD display illuminates.
- بند کرنے کے لئے: Press and hold the power button for approximately 3 seconds until you hear a beep and the LCD display turns off.
6.2 LCD ڈسپلے کو سمجھنا
The LCD display provides real-time status of the UPS. Key indicators include:
- ان پٹ جلدtage: Displays the current utility power voltage.
- آؤٹ پٹ والیمtage: والیوم دکھاتا ہے۔tage supplied by the UPS to connected devices.
- بیٹری کی سطح: باقی بیٹری چارج کی نشاندہی کرتا ہے۔
- لوڈ کرنے کی صلاحیت: فیصد دکھاتا ہے۔tage of the UPS's capacity being used by connected devices.
- آپریٹنگ موڈ: Indicates if the UPS is operating on utility power (AC mode) or battery power (Battery mode).
6.3 سافٹ ویئر کی تنصیب (اختیاری)
For advanced monitoring and management features, you can install the PowerWalker monitoring software. This software allows you to:
- UPS کی حیثیت اور بجلی کے حالات کی نگرانی کریں۔
- Perform scheduled shutdowns.
- Receive alerts for power events.
Connect the UPS to your computer using the provided USB cable. The UPS supports HID (Human Interface Device) driver, allowing basic functionality without additional software on compatible operating systems.
7 دیکھ بھال
7.1 بیٹری کی دیکھ بھال
- To maintain optimal battery life, ensure the UPS is connected to a power outlet at all times to keep the batteries charged.
- Perform a battery calibration (if supported by software) or a full discharge/recharge cycle every 3-6 months to ensure accurate battery runtime readings.
- Batteries are consumable items and will degrade over time. Replace batteries when their runtime significantly decreases.
7.2 صفائی
Clean the exterior of the UPS with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.
7.3 اسٹوریج
If storing the UPS for an extended period, ensure the batteries are fully charged. Recharge the batteries every three months to prevent permanent damage due to self-discharge.
8 خرابیوں کا سراغ لگانا
If you encounter issues with your UPS, refer to the following table for common problems and solutions:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| UPS does not turn ON | No utility power; Low battery; Power button not pressed long enough. | Check power cord connection; Allow UPS to charge for 8 hours; Press and hold power button for 3 seconds. |
| UPS beeps continuously in AC mode | اوور لوڈ کی حالت۔ | Disconnect non-essential equipment until the alarm stops. |
| UPS switches to battery mode frequently | Unstable utility power; High/low input voltage. | This is normal operation. If frequent, check utility power quality. |
| Battery runtime is shorter than expected | Batteries not fully charged; Batteries reaching end of life; Overload. | Allow 8 hours for charging; Consider battery replacement; Reduce connected load. |
اگر مذکورہ بالا حلوں کو آزمانے کے بعد بھی مسئلہ برقرار رہتا ہے، تو براہ کرم کسٹمر سپورٹ سے رابطہ کریں۔
9. وضاحتیں
Technical specifications for the PowerWalker VI 3000 SCL FR UPS:
| فیچر | قدر |
|---|---|
| ماڈل نمبر | 10121151 |
| صلاحیت | 3000VA / 1800W۔ |
| والیومtage | 290 وولٹ |
| مصنوعات کے طول و عرض | 39.7 x 14.6 x 20.5 سینٹی میٹر |
| شے کا وزن | 11.5 کلوگرام |
| رنگ | سیاہ |
| مواد | پولی کاربونیٹ (PC) |
| پہلی دستیاب تاریخ | 27. دسمبر 2019 |
10. وارنٹی اور سپورٹ
10.1 وارنٹی کی معلومات
PowerWalker products are manufactured to the highest quality standards. This UPS comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official PowerWalker webتفصیلی وارنٹی شرائط و ضوابط کے لیے سائٹ۔
10.2 کسٹمر سپورٹ
For technical assistance, troubleshooting, or warranty claims, please contact PowerWalker customer support. You can typically find contact information on the PowerWalker official webسائٹ یا اپنے مقامی ڈسٹری بیوٹر کے ذریعے۔
سپورٹ سے رابطہ کرتے وقت، براہ کرم اپنا پروڈکٹ ماڈل نمبر (10121151) اور سیریل نمبر تیار رکھیں۔
