Stack-On PS-1820-E Personal Steel Security Safe User Manual

1. سیٹ اپ

1.1 پیک کھولنا

Carefully remove the safe from its packaging. Inspect the safe for any signs of damage. Ensure all components are present:

• Stack-On PS-1820-E Security Safe
• بیک اپ کیز (2)
• ایڈجسٹ شیلف (2)
• Padded Shelf Liners (3)
• بڑھتے ہوئے ہارڈ ویئر
• صارف دستی

1.2 بیٹری کی تنصیب

The electronic lock requires batteries for operation. Locate the battery compartment, typically on the inside of the safe door or behind the keypad. Install the required batteries (usually AA, not included) according to the polarity markings.

1.3 سیف کو لگانا

For enhanced security, it is recommended to mount the safe to a floor or wall. The safe includes pre-drilled mounting holes and hardware. Choose a secure location and follow these general steps:

1. محفوظ مقام کو مطلوبہ جگہ پر رکھیں۔
2. Mark the drilling points through the pre-drilled holes on the back or bottom of the safe.
3. Move the safe and drill pilot holes using an appropriate drill bit for your mounting surface.
4. Reposition the safe and secure it using the provided mounting hardware.

Image: The Stack-On PS-1820-E safe shown mounted in a closet, demonstrating a typical installation scenario.

2. آپریٹنگ ہدایات

2.1 Setting Your Personal Code

Your safe comes with a factory default code. It is crucial to change this to a personal code immediately after battery installation. Refer to the specific instructions provided with your safe for the exact procedure, which typically involves pressing a reset button (often inside the door), entering your new 3-8 digit code, and confirming it.

2.2 اپنے کوڈ کے ساتھ سیف کو کھولنا

To open the safe using your electronic code:

1. Enter your 3-8 digit personal code on the keypad.
2. Press the '✓' (check mark) button to confirm.
3. Within 5 seconds, turn the handle clockwise to open the door.

تصویر: ایک تفصیلی view of the electronic keypad and handle on the safe door, highlighting the input interface.

2.3 Using the Backup Keys

In case of electronic lock failure or forgotten code, backup keys are provided. To use them:

1. Locate the keyhole, usually concealed behind a removable cover on the keypad.
2. Insert the backup key and turn it to unlock.
3. دروازہ کھولنے کے لیے ہینڈل کو موڑ دیں۔

2.4 شیلف کو ایڈجسٹ کرنا

The safe includes two adjustable shelves and three padded liners to customize storage space. The shelves can be removed or repositioned to accommodate items of various sizes.

Image: The interior of the safe showing two adjustable shelves and padded liners, illustrating the customizable storage options.

2.5 خاموش موڈ

The electronic lock features a silent mode for discreet entry. Consult your specific manual for instructions on how to activate or deactivate this feature.

2.6 کم بیٹری کی وارننگ

The electronic lock will indicate a low battery condition (e.g., flashing light, audible beeps) when power is running low. Replace batteries promptly to avoid being locked out.

2.7 سیف کو لاک کرنا

سیف کو لاک کرنے کے لیے:

1. محفوظ دروازے کو مضبوطی سے بند کریں۔
2. Turn the handle counter-clockwise until it locks into place. The electronic lock will automatically engage.

2.8 پروڈکٹ اوورview ویڈیو

جنرل اوور کے لیے یہ ویڈیو دیکھیںview of Stack-On products and their features.

3 دیکھ بھال

Proper maintenance ensures the longevity and reliable operation of your safe:

• صفائی: ایک نرم کے ساتھ بیرونی مسح کریں، ڈیamp کپڑا کھرچنے والے کلینر سے پرہیز کریں۔
• بیٹری کی تبدیلی: Replace batteries annually or when the low battery warning activates. Always use new, high-quality batteries.
• کلیدی ذخیرہ: Store backup keys in a secure location away from the safe.

4 خرابیوں کا سراغ لگانا

If you encounter issues with your safe, consider the following:

• Safe will not open with code: Ensure batteries are fresh and installed correctly. Re-enter the code carefully. If unsuccessful, use the backup key.
• کی پیڈ غیر جوابدہ ہے: بیٹریاں تبدیل کریں۔ اگر مسئلہ برقرار رہتا ہے تو کسٹمر سپورٹ سے رابطہ کریں۔
• Door will not close/lock: Check for any obstructions preventing the door from closing completely. Ensure the handle is turned fully to the locked position.
• Forgotten Code: Use the backup keys to open the safe and reset the code according to the instructions in Section 2.1.

5. وضاحتیں

6. وارنٹی کی معلومات

This Stack-On product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Stack-On website for detailed terms and conditions regarding coverage, duration, and how to make a claim.

7. کسٹمر سپورٹ

For technical assistance, troubleshooting, or inquiries regarding your Stack-On PS-1820-E Personal Steel Security Safe, please contact Stack-On customer support. Contact information can typically be found on the product packaging, the official Stack-On website, or the warranty documentation.