تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of the Antari WTR-20 Wireless Remote Kit. This kit is designed to provide wireless control for compatible Antari fog, haze, and snow machines, enhancing operational flexibility.
پروڈکٹ ختمview
The Antari WTR-20 Wireless Remote Kit consists of two main components: a handheld wireless transmitter (remote) and a receiver unit. The receiver connects to your compatible Antari machine, allowing the transmitter to send commands wirelessly.
تصویر 1: The Antari WTR-20 Wireless Remote Kit. On the left is the silver-colored handheld remote control with four circular buttons labeled A, B, C, and D, and a blue indicator light. On the right is the black receiver unit with a white multi-pin connector at its base, designed to plug into a compatible Antari machine.
سیٹ اپ
1. مطابقت کی جانچ
Ensure your Antari machine is compatible with the WTR-20 kit. This kit is designed for use with Antari models: AF-4R, FT-20, S-500, S-500XL, Z-380.
2. وصول کنندہ کی تنصیب
- بجلی بند: Before connecting the receiver, ensure your Antari machine is powered off and unplugged from the main power supply.
- ریموٹ پورٹ تلاش کریں: Identify the remote control input port on your Antari machine. This is typically a multi-pin connector.
- وصول کنندہ کو جوڑیں: Carefully align the receiver's connector with the machine's remote port and push it firmly into place. Do not force the connection.
- Secure Receiver: If applicable, use any provided mounting hardware or integrated clips to secure the receiver unit to the machine, preventing accidental disconnection.
3. پاور آن
Plug your Antari machine back into the power supply and turn it on. The receiver unit should power on automatically, indicated by an LED light (if present).
آپریٹنگ ہدایات
The WTR-20 remote provides basic control functions for your compatible Antari machine. Specific functions of buttons A, B, C, and D may vary slightly depending on the connected machine model. Refer to your machine's specific manual for detailed button assignments.
- بٹن A: Typically activates continuous output or a primary function.
- بٹن B: Often used for momentary output or a secondary function.
- بٹن C: May control output duration or other programmable settings.
- بٹن D: Can be assigned to a specific effect, timer, or other auxiliary function.
When a button is pressed, the blue indicator light on the remote will illuminate, confirming signal transmission. Ensure the remote is within operational range of the receiver for reliable control.
دیکھ بھال
Battery Replacement (Remote)
The handheld remote is powered by a small battery, typically a 12V A27 or similar. If the blue indicator light does not illuminate or the remote's range decreases significantly, the battery may need replacement.
- Locate the battery compartment on the back or side of the remote.
- Open the compartment using a small screwdriver or by sliding the cover.
- Remove the old battery and insert a new one, ensuring correct polarity (+/-).
- بیٹری کے ڈبے کو محفوظ طریقے سے بند کریں۔
صفائی
Wipe the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter the units.
خرابی کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| ریموٹ جواب نہیں دے رہا ہے۔ | Low or dead battery in remote. Out of range. Receiver not connected or powered. | Replace remote battery. Move closer to the receiver. Ensure receiver is securely connected and machine is powered on. |
| آپریٹنگ رینج میں کمی۔ | Weak remote battery. Obstructions between remote and receiver. Interference. | Replace remote battery. Ensure clear line of sight. Avoid operating near strong radio frequency sources. |
| Machine does not respond to any remote command. | Incorrect receiver connection. Incompatible machine. Machine fault. | Verify receiver is correctly and fully inserted. Confirm machine model is listed as compatible. Test machine with a wired remote if available, or contact Antari support. |
وضاحتیں
- ماڈل: WTR-20
- کنیکٹوٹی ٹیکنالوجی: ریڈیو فریکوئینسی
- تعاون یافتہ آلات کی زیادہ سے زیادہ تعداد: 1 (فی وصول کنندہ)
- ہم آہنگ آلات: Antari AF-4R, FT-20, S-500, S-500XL, Z-380
- Remote Feature: ایرگونومک ڈیزائن
- آئٹم کا وزن: Approximately 10 pounds (for the kit, including packaging)
- مینوفیکچرر: انتاری
وارنٹی اور سپورٹ
For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official Antari website. For technical support, service, or parts inquiries, please contact your authorized Antari dealer or Antari customer service directly.
انٹاری آفیشل Webسائٹ: www.antari.com
