تعارف
The Hifonics Zeus ZG-600.4 is a 4-channel Class AB amplifier designed to deliver up to 600 watts of power for your car's audio system. It features a Simpatico Coil Design (SPC) with a dual-coil PWM MOSFET power supply for efficient operation and minimal heat generation. The amplifier utilizes Ultra-Fi output devices and an aluminum heatsink for superior thermal management. It offers both RCA and high-level inputs for flexible installation and can operate in 4-channel or bridged mono mode. Angled connection types facilitate clean wire management.
تصویر: اوپر view of the Hifonics Zeus ZG-600.4 amplifier، showcasing اس کا چیکنا ڈیزائن۔
سیٹ اپ اور انسٹالیشن
زیادہ سے زیادہ کارکردگی اور حفاظت کے لیے مناسب تنصیب بہت ضروری ہے۔ یہ سفارش کی جاتی ہے کہ تنصیب کو ایک مستند پیشہ ور کے ذریعہ انجام دیا جائے۔
1 کو چڑھانا Ampزندگی
- Choose a secure, well-ventilated location in your vehicle, away from moisture and direct heat.
- کے ارد گرد مناسب جگہ کو یقینی بنائیں amplifier for air circulation, especially around the aluminum heatsink.
- پہاڑ ampگاڑی کے آپریشن کے دوران نقل و حرکت کو روکنے کے لیے مناسب ہارڈ ویئر کا مضبوطی سے استعمال کرنا۔
2. بجلی کے رابطے
- Connect the main power cable directly to the vehicle's battery, ensuring an inline fuse is installed within 18 inches of the battery.
- Connect the ground cable to a clean, unpainted metal surface on the vehicle chassis, ensuring a solid electrical connection.
- Connect the remote turn-on wire from your head unit to the ampلائفائر کا ریموٹ ان پٹ۔
- دی amplifier operates with a 6 Volt input voltage.
3 آڈیو ان پٹ کنکشنز
The ZG-600.4 offers both RCA (low-level) and high-level inputs for compatibility with various head units.
- آر سی اے ان پٹ: Use high-quality RCA cables to connect the head unit's pre-amp کو آؤٹ پٹ amplifier's CH1/CH2 and CH3/CH4 RCA inputs.
- اعلی درجے کی معلومات: If your head unit lacks RCA outputs, use the high-level inputs. Connect the speaker wires from your head unit to the ampلائفائر کے اعلی درجے کے ان پٹ ٹرمینلز۔
4 اسپیکر آؤٹ پٹ کنکشنز
- اپنے اسپیکرز کو اس سے مربوط کریں۔ amplifier's speaker output terminals. Ensure correct polarity (+ to + and - to -).
- دی amplifier can be configured for 4-channel stereo or bridged mono operation. Refer to the "Operating Instructions" section for mode selection.
Image: Rear panel of the Hifonics Zeus ZG-600.4 amplifier, detailing the input, output, and control sections.
آپریٹنگ ہدایات
The Hifonics Zeus ZG-600.4 ampلائفائر آپ کے آڈیو سسٹم کو ٹھیک کرنے کے لیے مختلف کنٹرولز پیش کرتا ہے۔
1. پاور آن/آف
- دی amplifier will power on automatically when the remote turn-on signal is received from your head unit.
- A power indicator light will illuminate when the ampلیفائر آپریشنل ہے.
2. Level (Gain) Adjustment
- The "LEVEL" knobs adjust the input sensitivity (gain) for each channel pair (CH1/CH2 and CH3/CH4).
- Set the gain to match the output voltagای آپ کے ہیڈ یونٹ کا۔ کم سے کم فائدہ کے ساتھ شروع کریں اور آہستہ آہستہ اس میں اضافہ کریں جب تک کہ مسخ کیے بغیر مطلوبہ حجم حاصل نہ ہوجائے۔
- نوٹ: Setting the gain too high can lead to distorted sound and potential damage to speakers or the ampزندگی
3. Crossover Settings (X-OVER)
دی amplifier features adjustable crossovers to direct specific frequency ranges to your speakers.
- موڈ سوئچ: Select between 2CH (2-channel), 4CH (4-channel), or MONO (bridged mono) operation.
- HIGH PASS (HPF): Filters out frequencies below the set point. Useful for full-range speakers to prevent them from playing low bass.
- LOW PASS (LPF): Filters out frequencies above the set point. Useful for subwoofers.
- مکمل: Bypasses the crossover, allowing full-range audio.
- X-OVER FREQUENCY: Adjusts the cutoff frequency for the high-pass or low-pass filter.
- نوٹ: Some users have reported issues with the built-in hi-pass filter. External filters may be considered if optimal performance is not achieved.
4. Bass EQ / Subsonic Filter
- باس EQ: Provides a bass boost at a specific frequency. Use sparingly to avoid distortion.
- سبسونک: Filters out extremely low, inaudible frequencies that can waste amplifier power and damage subwoofers.
Image: Close-up of the Hifonics Zeus logo on the amplifier's brushed metal casing.
دیکھ بھال
Regular maintenance ensures the longevity and optimal performance of your Hifonics Zeus ampزندگی
- صفائی: وقتا فوقتا مسح کریں۔ amplifier's exterior with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure ventilation fins are free from dust and debris to maintain proper cooling.
- کنکشن چیکس: Regularly inspect all power, ground, remote, and audio connections. Ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- وینٹیلیشن: تصدیق کریں کہ amplifier's mounting location allows for adequate airflow. Blocked vents can lead to overheating and activation of protection circuits.
- فیوز معائنہ: Check the inline fuse on the power cable periodically. If the amplifier fails to power on, inspect this fuse first. Always replace with a fuse of the correct ampایریج
خرابی کا سراغ لگانا
This section addresses common issues you might encounter with your Hifonics Zeus ZG-600.4 ampزندگی
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Ampلائفائر آن نہیں ہوتا ہے۔ | No power, poor ground, faulty remote turn-on, blown fuse. | Check power and ground connections. Verify remote turn-on signal. Inspect and replace fuses if necessary. |
| Ampلائفیر پروٹیکشن موڈ میں جاتا ہے۔ | Overheating, short circuit in speaker wiring, impedance mismatch, low voltage. | Ensure proper ventilation. Check speaker wiring for shorts. Verify speaker impedance. Check vehicle's battery voltage اجازت دیں۔ ampٹھنڈا کرنے کے لئے لائفائر. |
| کوئی آواز یا مسخ شدہ آواز نہیں۔ | Incorrect gain setting, loose audio connections, faulty RCA cables, incorrect crossover settings, damaged speakers. | Adjust gain properly. Check all RCA and speaker connections. Verify crossover settings (HPF/LPF). Test speakers with another source if possible. |
| Signal dropouts or noise. | Poor quality cables, ground loop, faulty unit. | Use shielded RCA cables. Ensure proper grounding. If issues persist, the unit may be faulty and require professional inspection. |
| Gain/adjustment dials are loose or stripped. | Manufacturing defect or wear. | Contact Hifonics customer support or your retailer for assistance. This may require repair or replacement. |
| Built-in hi-pass filter not effective. | Unit characteristic or specific setup incompatibility. | Consider using external hi-pass filters (e.g., RCA hi-pass filters) if precise frequency control is needed. |
وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل کا نام | HIFZG6004 (ZG-600.4) |
| آئٹم ماڈل نمبر | 600 واٹ 4 چینل |
| برانڈ | ہائفونکس |
| اسپیکر زیادہ سے زیادہ آؤٹ پٹ پاور | 600 واٹ |
| سرکٹس کی تعداد | 4 |
| آڈیو آؤٹ پٹ وضع | Mono (also supports Stereo) |
| ان پٹ جلدtage | 6 وولٹ |
| تعدد رسپانس | 40 Hz |
| سگنل ٹو شور کا تناسب | 0.5 ڈی بی |
| کنیکٹوٹی ٹیکنالوجی | وائرڈ |
| چڑھنے کی قسم | کار ماؤنٹ |
| مواد | دھات |
| رنگ | چاندی |
| مصنوعات کے طول و عرض | 1"D x 1"W x 1"H |
| شے کا وزن | 6.18 پاؤنڈ |
| واٹر پروف ہے۔ | جھوٹا۔ |
| شامل اجزاء | Product, Manual |
| یو پی سی | 806576231189 |
وارنٹی کی معلومات
The Hifonics Zeus ZG-600.4 amplifier a کے ساتھ آتا ہے۔ محدود وارنٹی. Specific terms and conditions of the warranty, including duration and coverage details, are typically provided with the product packaging or can be found on the official Hifonics webسائٹ
Please retain your proof of purchase for any warranty claims. For detailed warranty information or to initiate a claim, refer to the documentation included with your product or contact Hifonics customer support directly.
کسٹمر سپورٹ
For further assistance, technical support, or inquiries regarding your Hifonics Zeus ZG-600.4 amplifier, please utilize the following resources:
- سرکاری Webسائٹ: کا دورہ کریں۔ Hifonics Store for product information, FAQs, and support contact details.
- Included Manual: Refer to the physical manual included in the product packaging for additional diagrams and specific instructions.
- مجاز ڈیلرز: Contact the retailer from whom you purchased the product for local support and service.
