Cisco Meraki MR76 Wi-Fi 6 Outdoor/Industrial Access Point User Manual

1. تعارف

This manual provides essential information for the installation, configuration, and maintenance of your Cisco Meraki MR76 Wi-Fi 6 Outdoor/Industrial Access Point. The MR76 is designed for high-performance wireless connectivity in challenging outdoor and industrial environments, leveraging Wi-Fi 6 technology and integrated Bluetooth radios. It requires external antennas for operation and is managed through the Cisco Meraki cloud platform.

2. حفاظتی معلومات

• تمام ہدایات پڑھیں: Before installation and operation, carefully read and understand all instructions provided in this manual.
• قابل عملہ: تنصیب اور سروسنگ صرف اہل اہلکاروں کے ذریعہ انجام دی جانی چاہئے۔
• طاقت کا منبع: Ensure the power source meets the specifications for Power over Ethernet (PoE) and is properly grounded.
• اینٹینا کی تنصیب: Install external antennas according to local regulations and manufacturer guidelines to avoid interference and ensure safety.
• ماحولیاتی تحفظات: While designed for outdoor use, avoid installing the device in locations subject to extreme temperatures, direct lightning strikes, or excessive vibration.
• بجلی کے خطرات: Do not open the device enclosure. Refer all servicing to qualified service personnel.

3. پیکیج کے مشمولات

تصدیق کریں کہ آپ کے پیکیج میں درج ذیل آئٹمز ہیں:

• Cisco Meraki MR76 Access Point unit
• Mounting bracket (for pole or wall mounting)
• Mounting hardware (screws, anchors, hose clamps)
• کوئیک اسٹارٹ گائیڈ
• Note: External antennas are required for operation and are sold separately.

4. جسمانی اوورview

The MR76 features a robust, weatherproof enclosure suitable for outdoor and industrial deployments. It includes ports for network connectivity and antenna connections.

شکل 1: سامنے view of the Cisco Meraki MR76 Access Point. This image shows the compact design of the unit, which is built for outdoor and industrial environments.

ایل ای ڈی اشارے

The device includes an LED indicator to provide status information:

• ٹھوس سبز: Device is online and operating normally.
• چمکتا سبز: Device is booting up or performing a firmware upgrade.
• ٹھوس عنبر: Device is experiencing a fault or is not connected to the Meraki cloud.

بندرگاہیں اور کنیکٹر

• ایتھرنیٹ پورٹ: RJ45 connector for network connectivity and Power over Ethernet (PoE) input.
• اینٹینا کنیکٹر: Multiple N-type connectors for external Wi-Fi antennas.
• ری سیٹ بٹن: Small button for factory reset (requires a paperclip or similar tool).

5. انسٹالیشن اور سیٹ اپ

5.1 رسائی پوائنٹ پر چڑھنا

The MR76 can be mounted on a pole or a wall. Choose a location that provides optimal wireless coverage and is accessible for maintenance.

1. مقام منتخب کریں: Identify a suitable mounting location, considering line of sight for wireless signals and proximity to a PoE-enabled network switch.
2. ماؤنٹنگ بریکٹ منسلک کریں: Secure the mounting bracket to the pole using the provided hose clamps or to a wall using screws and anchors. Ensure the bracket is firmly attached.
3. Attach MR76 to Bracket: Align the MR76 unit with the mounting bracket and slide it into place until it clicks securely.

5.2 Connecting External Antennas

The MR76 requires external antennas for Wi-Fi operation. Ensure you use compatible N-type antennas.

1. Identify Antenna Ports: Locate the N-type connectors on the MR76.
2. انٹینا منسلک کریں: Carefully screw the external antennas onto the connectors. Hand-tighten only; do not overtighten.
3. Position Antennas: Adjust the antenna orientation for optimal coverage based on your deployment plan.

5.3 ڈیوائس کو پاور کرنا

The MR76 is powered via Power over Ethernet (PoE).

1. ایتھرنیٹ کیبل کو جوڑیں: Connect an Ethernet cable from a PoE-enabled switch or PoE injector to the Ethernet port on the MR76.
2. طاقت کی تصدیق کریں: Once connected, the LED indicator on the MR76 should illuminate, indicating power.

5.4 نیٹ ورک کنکشن

Ensure the Ethernet cable from the MR76 is connected to a network switch that has internet access and is configured for your Meraki network.

6. آپریٹنگ اور کنفیگریشن

The Cisco Meraki MR76 is managed entirely through the Meraki cloud dashboard. No local configuration is required.

1. Access Meraki Dashboard: کھولنا a web براؤزر اور نیویگیٹ کریں۔ dashboard.meraki.com. Log in with your Meraki account credentials.
2. ڈیوائس شامل کریں: If this is a new device, add it to your network in the dashboard using its serial number.
3. نیٹ ورک کی ترتیبات کو ترتیب دیں: Within the dashboard, configure your wireless SSIDs, security protocols (WPA2, WPA3), VLANs, and other network-specific settings.
4. مانیٹر کارکردگی: Use the dashboard to monitor the access point's status, client connectivity, and overall network performance.
5. Bluetooth Radios: The integrated Bluetooth radios can be configured and managed via the Meraki dashboard for location services or IoT applications.

7 دیکھ بھال

• فرم ویئر اپ ڈیٹس: Firmware updates are automatically managed and deployed by the Meraki cloud. Ensure your device has a stable internet connection for these updates.
• جسمانی معائنہ: Periodically inspect the device and antenna connections for any signs of damage, corrosion, or loose fittings, especially in harsh outdoor environments.
• صفائی: Gently clean the exterior of the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are sealed if not in use.
• اینٹینا سیدھ: Re-check antenna alignment if wireless performance degrades or if the device has been subjected to strong winds or physical impact.

8 خرابیوں کا سراغ لگانا

For further assistance, refer to the Cisco Meraki documentation or contact support.

9. وضاحتیں

10. وارنٹی اور سپورٹ

The Cisco Meraki MR76 includes a 5-year license and support package (MR76-HW+LIC-ENT-5YR). This package provides access to the Meraki cloud management platform, firmware updates, and 24/7 technical support.

For technical assistance, documentation, or to open a support case, please visit the official Cisco Meraki support portal:

https://meraki.cisco.com/support