1. تعارف
This manual provides essential information for the proper installation, operation, and maintenance of your Lowrance Active Imaging 3-In-1 Transducer (Model: 000-14489-001). This transducer is designed to enhance your marine electronics system by providing detailed sonar imaging capabilities. Please read this manual thoroughly before installation and use.
2. حفاظتی معلومات
چوٹ اور سامان کو پہنچنے والے نقصان کو روکنے کے لیے درج ذیل حفاظتی تدابیر پر عمل کریں:
- Always disconnect power to the marine electronics system before installing or servicing the transducer.
- Ensure all connections are secure and waterproof to prevent electrical shorts or corrosion.
- Mount the transducer in a location where it will not interfere with boat operation or pose a hazard to swimmers.
- Avoid exposing the transducer to extreme temperatures or harsh chemicals.
3. پیکیج کے مشمولات
تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:
- Lowrance Active Imaging 3-In-1 Transducer
- Transom Mount Bracket
- بڑھتے ہوئے ہارڈ ویئر (پیچ، واشر، گری دار میوے)
- تنصیب کا سانچہ (اگر شامل ہو)
4. سیٹ اپ اور انسٹالیشن
The Lowrance Active Imaging 3-In-1 Transducer is designed for transom mounting. Proper placement is crucial for optimal performance.
4.1 بڑھتے ہوئے مقام
Select a location on the transom that is:
- Free from obstructions (e.g., propellers, strakes, other transducers).
- In an area of smooth water flow, minimizing turbulence.
- Accessible for installation and maintenance.
4.2 جسمانی تنصیب
- Position the transom mount bracket on the selected location. Ensure the bottom of the transducer will be slightly below the hull line when deployed.
- Mark the drill holes using the bracket as a template.
- Drill pilot holes. Apply marine sealant to prevent water intrusion.
- Secure the transom mount bracket to the boat using the provided mounting hardware.
- Attach the transducer to the bracket. Adjust the angle so the transducer face is parallel to the waterline.
تصویر 1: زاویہ دار view of the Lowrance Active Imaging 3-In-1 Transducer with its transom mount bracket.
تصویر 2: طرف view of the transducer, illustrating its profile and mounting position.
تصویر 3: نیچے view of the transducer, showing the sonar elements.
4.3 الیکٹریکل کنکشن
Route the transducer cable to your compatible Lowrance display unit (e.g., HDS LIVE, HDS Carbon, Elite Ti2). The transducer features a 9-Pin connection. Ensure the connector is fully seated and the locking collar is tightened to create a waterproof seal.
5. آپریٹنگ ہدایات
The Active Imaging 3-In-1 Transducer combines multiple sonar technologies to provide a comprehensive view پانی کے اندر کے ماحول کا۔
5.1 Sonar Frequencies and Modes
- Med/High CHIRP: روایتی سونار فراہم کرتا ہے۔ views for fish arches and bottom tracking.
- SideScan: وسیع، اعلی ریزولوشن پیش کرتا ہے۔ views of structure and fish to the sides of your boat.
- DownScan: Delivers picture-like views of structure and fish directly below your boat.
Refer to your Lowrance display unit's manual for detailed instructions on selecting and optimizing these sonar modes.
6 دیکھ بھال
Regular maintenance ensures optimal performance and longevity of your transducer.
- صفائی: Periodically clean the transducer face with mild soap and water to remove marine growth, dirt, or oil. Avoid abrasive cleaners or solvents.
- معائنہ: Regularly inspect the transducer cable for cuts, kinks, or damage. Check the mounting bracket for looseness or corrosion.
- سرمائی کاری: If operating in freezing conditions, ensure the transducer is not exposed to ice formation, which can cause damage.
7 خرابیوں کا سراغ لگانا
If you experience issues with your transducer, consider the following common problems and solutions:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| No Sonar Reading | Loose connection, power issue, transducer not submerged. | Check cable connections, verify power to display unit, ensure transducer is in water. |
| Poor or Intermittent Imaging | Air bubbles, marine growth, incorrect mounting angle, electrical interference. | Clean transducer face, adjust mounting angle, check for sources of electrical noise, reposition transducer if necessary. |
| SideScan/DownScan Not Working | Incorrect display unit settings, damaged transducer element. | Verify sonar settings on your display unit. If problem persists, contact support. |
For persistent issues, consult your Lowrance display unit's manual or contact Lowrance customer support.
8. وضاحتیں
- ماڈل: 000-14489-001
- قسم: Active Imaging 3-In-1 Transducer
- تعدد: Med/High CHIRP, SideScan, DownScan
- کنکشن: 9-پن
- چڑھنے کی قسم: ٹرانسوم ماؤنٹ
- طول و عرض: تقریباً 8 x 6 x 4 انچ (20.3 x 15.2 x 10.2 سینٹی میٹر)
- وزن: تقریباً 3.66 پاؤنڈ (1.66 کلوگرام)
- ہم آہنگ یونٹ: HDS LIVE, HDS Carbon, Elite Ti2 series
9. وارنٹی اور سپورٹ
This Lowrance Active Imaging 3-In-1 Transducer (Model: 000-14489-001) is covered by a 90 دن کی محدود وارنٹی خریداری کی تاریخ سے. یہ وارنٹی عام استعمال کے تحت مواد اور کاریگری میں نقائص کا احاطہ کرتی ہے۔
For warranty claims, technical support, or further assistance, please refer to the official Lowrance webسائٹ یا ان کے کسٹمر سروس ڈیپارٹمنٹ سے رابطہ کریں۔ وارنٹی کی توثیق کے لیے اپنی خریداری کا ثبوت اپنے پاس رکھیں۔
