ہیبی ٹیٹ ڈیکور MR3802W 30 انچ گول نقش شدہ فریم آئینہ صارف دستی

1. پروڈکٹ ختمview

The Habitat Decor MR3802W is a 30-inch round mirror designed to enhance your living space. It features a wooden frame with ridged details and a distressed white finish, offering a rustic aesthetic. This mirror is intended for wall mounting and measures 30 inches in length and 30 inches in width.

• طول و عرض: 30 inches (76.2 cm) long x 30 inches (76.2 cm) wide
• فریم مواد: لکڑی
• ختم: پریشان سفید
• چڑھنے کی قسم: وال ماؤنٹ

شکل 1: سامنے view of the Habitat Decor 30-inch round mirror, showcasing its distressed white carved frame.

2. اہم حفاظتی معلومات

Please read and understand all safety instructions before handling or installing the mirror. Failure to follow these instructions may result in injury or damage to the product.

• انتباہ: This mirror contains breakable glass. Always handle with extreme care to prevent injury.
• For wall mounting, ensure the chosen wall surface is structurally sound and level to securely support the mirror's weight (approximately 9.7 pounds or 4.4 kg).
• Avoid placing the mirror near direct heat sources, open flames, or areas prone to significant vibration, as this can increase the risk of breakage.
• In the event of breakage, exercise caution when cleaning up shattered glass to avoid cuts. Use protective gloves and dispose of glass fragments safely.
• Keep out of reach of children and pets during installation and ensure it is securely mounted afterward.

3. پیکیج کے مشمولات

تنصیب کے ساتھ آگے بڑھنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں اور ان کو نقصان نہیں پہنچا ہے۔

• 1 x Habitat Decor MR3802W 30-inch Round Carved Frame Mirror
• Pre-installed hanging hardware (D-rings or similar, typically on the back)

Note: Mounting screws, wall anchors, and tools are not included and must be supplied by the user based on wall type.

4. تنصیب کی ہدایات

The Habitat Decor MR3802W mirror is designed for wall mounting and requires no assembly. Follow these steps for secure installation:

1. مقام کا انتخاب کریں: Select a suitable wall location, ensuring it is free from electrical wires, plumbing, or other obstructions. The wall must be capable of supporting the mirror's weight (approximately 9.7 lbs).
2. ٹولز جمع کریں: You will need a measuring tape, pencil, level, drill, appropriate wall anchors (e.g., drywall anchors, toggle bolts, or stud screws depending on your wall type), and screws.
3. Measure Hanging Points: On the back of the mirror, locate the pre-installed hanging hardware (typically two D-rings or keyhole hangers). Measure the distance between the centers of these hangers.
4. مارک وال: Transfer this measurement to your chosen wall location. Use a level to ensure the marked points are perfectly horizontal.
5. اینکرز/ پیچ انسٹال کریں: Drill pilot holes at the marked points and install appropriate wall anchors if not drilling into a wall stud. Insert screws into the anchors or studs, leaving a small portion of the screw head exposed for the mirror's hangers to rest on.
6. ہینگ آئینہ: Carefully lift the mirror and align the pre-installed hanging hardware on the back with the screws on the wall. Gently lower the mirror until it is securely seated on the screws.
7. استحکام کی تصدیق کریں: آئینے پر ہلکے سے ٹگ لگائیں تاکہ یہ یقینی بنایا جا سکے کہ یہ مستحکم ہے اور محفوظ طریقے سے دیوار پر لگا ہوا ہے۔

شکل 2: پیچھے view of the mirror, illustrating the pre-installed hanging hardware for wall mounting.

5. دیکھ بھال اور دیکھ بھال

Proper care will help maintain the appearance and longevity of your mirror.

• آئینے کی سطح کی صفائی: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the frame edges. Wipe gently until clean and streak-free.
• فریم کی صفائی: The wooden frame with its distressed white finish should be cleaned with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
• ہینڈلنگ: Always lift the mirror by its frame, not by the glass.
• ماحولیات: Avoid exposing the mirror to extreme temperature changes or high humidity, which can affect the wood frame and mirror backing.

Figure 3: Detail of the mirror's distressed white carved wooden frame.

6 خرابیوں کا سراغ لگانا

یہ سیکشن عام خدشات کو حل کرتا ہے جو آپ کو اپنے آئینے کے ساتھ مل سکتے ہیں۔

7. مصنوعات کی تفصیلات

8. وارنٹی اور سپورٹ

Based on the provided information, this product does not come with a manufacturer's warranty ("No Warranty").

For any questions regarding the product or assistance with installation, please refer to the retailer's customer service or contact the manufacturer, Brewster Home Fashions, directly.

• مینوفیکچرر: Brewster Home Fashions
• کاروبار کی جگہ: RANDOLPH, MA, 02368 US