Hifonics BG-4000.1D Brutus Gamma Monoblock Ampلائفائر انسٹرکشن دستی

1. پروڈکٹ ختمview

The Hifonics BG-4000.1D Brutus Gamma Monoblock Amplifier is a Super D Class car audio amplifier designed to deliver powerful sound to subwoofers. It features a robust aluminum construction for efficient cooling and minimal distortion, along with advanced control capabilities for precise audio tuning.

تصویر 1: سامنے view of the Hifonics BG-4000.1D Brutus Gamma Monoblock Amplifier، showcasing its sleek design and Hifonics branding.

یہ amplifier is engineered for high performance, providing up to 4000 watts at 1 ohm, 2200 watts at 2 ohms, and 1100 watts at 4 ohms. It includes a wired bass remote for convenient control and features Ultra-Fi MOSFET output device technology for powerful and clear sound reproduction.

2. حفاظتی معلومات

WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or vehicle.

• بجلی کا کوئی بھی کام کرنے سے پہلے گاڑی کی بیٹری کو ہمیشہ منقطع کریں۔
• کی مناسب بنیاد کو یقینی بنائیں ampگاڑی کے چیسس کو لائفائر۔
• Use appropriate gauge wiring for power, ground, and speaker connections to prevent overheating and damage.
• انسٹال کریں۔ amplifier in a well-ventilated area to prevent overheating. Avoid mounting in enclosed spaces without adequate airflow.
• تمام وائرنگ کو تیز کناروں اور حرکت پذیر حصوں سے بچائیں۔
• کو بے نقاب نہ کریں۔ ampنمی یا انتہائی درجہ حرارت کو بہتر بنانے والا۔
• Seek professional installation if you are unsure about any part of the setup process.

3. سیٹ اپ اور انسٹالیشن

3.1 چڑھانا Ampزندگی

Select a mounting location that provides adequate ventilation and is protected from moisture. The amplifier's aluminum heat sink is designed for efficient cooling, but proper airflow is still essential. Secure the ampمناسب ہارڈ ویئر کا استعمال کرتے ہوئے مضبوطی سے ٹھوس سطح پر لائفائر۔

تصویر 2: سائیڈ view کی amplifier, illustrating its compact dimensions (L) 21.94" x (W) 11.81" x (H) 4.06" and built-in bass control.

3.2 وائرنگ رابطے

All connections should be made with the vehicle's battery disconnected. Use high-quality, appropriate gauge wiring for all connections.

Image 3: Rear panel of the amplifier showing power, ground, remote, and speaker output terminals. Note the illuminated power and protect indicators.

پاور اور گراؤنڈ کنکشن:

• +12V (پاور): Connect to the positive terminal of the vehicle's battery via an appropriate fuse or circuit breaker (not included).
• GND (گراؤنڈ): گاڑی کے چیسس کی صاف، بغیر پینٹ شدہ دھات کی سطح سے جڑیں۔ ٹھوس، کم مزاحمتی کنکشن کو یقینی بنائیں۔
• REM (ریموٹ): اپنے ہیڈ یونٹ کے ریموٹ ٹرن آن آؤٹ پٹ سے جڑیں۔

تصویر 4: کلوز اپ view of the secure molded connection terminals for power, ground, remote, and speaker outputs, designed for high-temperature and impact resistance.

اسپیکر آؤٹ پٹ کنکشن:

• Connect your subwoofer(s) to the "MONO OUTPUT" terminals. Ensure correct polarity (+ to + and - to -).
• دی amplifier supports mono operation and is stable down to 1 ohm.

RCA ان پٹ کنکشنز:

• Connect the RCA input cables from your head unit's subwoofer output to the amplifier's "INPUT" RCA jacks.

Image 5: Close-up of the amplifier's control panel, including RCA inputs, gain, low-pass filter, subsonic filter, phase, and bass boost adjustments.

3.3 ابتدائی پاور اپ

After all connections are secure, reconnect the vehicle's battery. The power indicator LED on the amplifier's end panel should illuminate, indicating proper operation. If the protect LED illuminates, refer to the troubleshooting section.

4. آپریٹنگ ہدایات

4.1 کنٹرولز کو ایڈجسٹ کرنا

The BG-4000.1D amplifier features several adjustable controls to fine-tune your audio output:

• حاصل کرنا: Adjusts the input sensitivity to match the output of your head unit. Start with the gain at minimum and slowly increase until desired volume is achieved without distortion.
• ایل پی ایف (کم پاس فلٹر): Controls the upper frequency limit for the subwoofer. Typically set between 40Hz and 180Hz to ensure only low frequencies are sent to the subwoofer.
• سبسونک: Filters out extremely low frequencies that are inaudible and can damage subwoofers. Typically set between 10Hz and 40Hz.
• مرحلہ: Adjusts the phase of the subwoofer output (0° or 180°) to optimize bass response with other speakers in the vehicle.
• باس بوسٹ: Provides an adjustable bass enhancement (0dB to 12dB) at a specific frequency. Use sparingly to avoid distortion.

4.2 Wired Bass Remote

The included wired bass remote allows for convenient adjustment of the subwoofer output level from the driver's seat. Connect the remote to the dedicated port on the amplifier's control panel.

4.3 ایل ای ڈی اشارے

• PWR (پاور) ایل ای ڈی: سبز کو روشن کرتا ہے جب ampلائفائر آن ہے اور عام طور پر کام کر رہا ہے۔
• PRT (Protect) LED: سرخ کو روشن کرتا ہے جب amplifier detects a fault (e.g., overheating, short circuit, low voltage). If this LED lights up, turn off the audio system and investigate the cause.

For optimal performance, refer to the detailed instructions in the full product manual for specific settings and tuning recommendations.

5 دیکھ بھال

• صفائی: صاف کرنے کے لیے نرم، خشک کپڑا استعمال کریں۔ ampلائفائر کا بیرونی حصہ۔ سخت کیمیکل یا کھرچنے والے کلینر کا استعمال نہ کریں۔
• وینٹیلیشن: وقتاً فوقتاً چیک کریں کہ amplifier's heat sink fins are free from dust and debris to ensure proper cooling.
• رابطے: Ensure all power, ground, and speaker connections remain tight and free from corrosion.

6 خرابیوں کا سراغ لگانا

7. وضاحتیں

7.1 پروڈکٹ ویڈیو

8. وارنٹی اور سپورٹ

8.1 وارنٹی کی معلومات

This Hifonics product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.

8.2 کسٹمر سپورٹ

For technical assistance, troubleshooting, or warranty inquiries, please contact Hifonics customer support. Visit the official Hifonics webتازہ ترین رابطے کی معلومات اور معاون وسائل کے لیے سائٹ۔

ایمیزون پر ہیفونکس اسٹور پر جائیں۔