1. تعارف
This manual provides comprehensive instructions for the installation, operation, and maintenance of your 2GIG Z-Wave 700 Programmable Thermostat, Model 2GIG-STZ-1. This device allows for remote control of your heating and air conditioning systems via a Z-Wave network, in addition to direct control from the thermostat unit.
The 2GIG-STZ-1 thermostat is compatible with most modern HVAC systems, including standard Gas/Electric (2-stagای حرارتی ، 2-s۔tage cooling) and Heat Pump systems (3-stagای حرارتی ، 2-s۔tage cooling), with support for humidifiers and dehumidifiers.
شکل 1: سامنے view of the 2GIG Z-Wave 700 Programmable Thermostat, displaying current temperature, fan status, and time.
اہم خصوصیات:
- Z-Wave کنٹرول: Seamless integration with smart home systems for remote access.
- ورسٹائل مطابقت: Supports standard gas/electric, heat pump, and humidifier/dehumidifier systems.
- آسان تنصیب: Designed for straightforward replacement of existing thermostats.
- دوہری طاقت کا ذریعہ: Operates on 4 AA batteries or 24VAC power from your HVAC system.
- صاف ڈسپلے: Large, easy-to-read LCD for temperature control and monitoring.
2. حفاظتی معلومات
براہ کرم اس تھرموسٹیٹ کو انسٹال کرنے یا چلانے سے پہلے تمام ہدایات کو غور سے پڑھیں۔ ان ہدایات پر عمل کرنے میں ناکامی کے نتیجے میں جائیداد کو نقصان، چوٹ یا موت ہو سکتی ہے۔
- برقی حفاظت: Always turn off power to the HVAC system at the circuit breaker before installing or servicing the thermostat.
- والیومtagای مطابقت: This thermostat is designed for 24VAC systems only. It is NOT compatible with 120/240 VAC systems.
- بیٹری کی تنصیب: If powering the thermostat via 24VAC, do not install AA batteries. Batteries are for backup power only if 24VAC is not available or desired.
- پیشہ ورانہ تنصیب: اگر آپ کو انسٹالیشن کے عمل کے کسی بھی حصے کے بارے میں یقین نہیں ہے، تو ایک قابل HVAC ٹیکنیشن سے مشورہ کریں۔
3. پیکیج کے مشمولات
تصدیق کریں کہ تمام اشیاء پیکیج میں موجود ہیں:
- 2GIG Z-Wave 700 Programmable Thermostat (Model 2GIG-STZ-1)
- 4 ایکس اے اے بیٹریاں
- بڑھتے ہوئے ہارڈ ویئر (پیچ اور دیوار کے اینکرز)
- انسٹالیشن دستی (یہ دستاویز)
- کوئیک اسٹارٹ گائیڈ
4. تنصیب
4.1. تنصیب کی تیاری
- Turn off power to your heating and cooling system at the main circuit breaker.
- Remove your old thermostat's cover. Take a picture of the wiring connections for reference.
- ہر تار کو اپنے پرانے تھرموسٹیٹ سے متعلقہ ٹرمینل لیٹر سے لیبل کریں۔
- Disconnect the wires and remove the old thermostat's mounting plate.
4.2. Mounting the Back Panel
The back panel of the 2GIG-STZ-1 thermostat serves as the mounting base and wiring terminal.
- Feed the wire cable from the wall through the access hole in the new mounting plate.
- Use the provided wall anchors and two Phillips screws to secure the back panel to the wall.
- Ensure the back panel is level for proper aesthetic alignment.
Figure 2: Illustration of mounting the back panel, showing wire access and screw locations.
4.3 تھرموسٹیٹ کی وائرنگ
Connect the labeled wires to the corresponding terminals on the thermostat's back panel. Refer to your old thermostat's wiring diagram and the labels you made. The 2GIG-STZ-1 supports the following configurations:
- Standard Gas/Electric HVAC: 2-s تک۔tagای حرارتی ، 2-s۔tagای کولنگ.
- Heat Pump HVAC: 3-s تک۔tagای حرارتی ، 2-s۔tagای کولنگ.
- Humidifier/Dehumidifier Support: Dedicated terminals available.
For 24VAC power, ensure both "R" and "C" wires are connected. If a "C" wire is not available, the thermostat can be powered by 4 AA batteries, but it will not repeat Z-Wave signals in your network.
4.4. فرنٹ پینل کو منسلک کرنا
Once wiring is complete, attach the thermostat's front panel to the mounted back panel.
- Align the front panel with the back panel.
- Gently press the front panel onto the back panel until it snaps securely into place around all edges.
Figure 3: Illustration of attaching the front panel to the back panel, showing the snap-together mechanism.
After the front panel is attached, restore power to your HVAC system at the circuit breaker.
5. آپریٹنگ ہدایات
5.1 تھرموسٹیٹ کو پاور کرنا
The thermostat can be powered by 24VAC from your HVAC system (if "R" and "C" wires are connected) or by four (4) AA batteries. If 24VAC is supplied, batteries are not required for operation but can serve as a backup. If only battery-powered, the thermostat will not function as a Z-Wave repeater.
5.2۔ بنیادی کنٹرولز
The thermostat features a clear LCD display and intuitive buttons for control:
- FAN بٹن: Cycles through fan modes (Auto, On).
- موڈ بٹن: Cycles through system modes (Heat, Cool, Auto, Off, Em Heat).
- اوپر/نیچے تیر: Adjusts the temperature setpoint.
5.3. درجہ حرارت کو ایڈجسٹ کرنا
دبائیں Up or نیچے arrow buttons to increase or decrease the desired temperature setpoint. The display will show the new setpoint temporarily.
5.4. Z-Wave Network Integration
To integrate the thermostat into your Z-Wave network, refer to your Z-Wave hub's instructions for adding new devices. The 2GIG-STZ-1 is a Z-Wave 700 series device, offering enhanced range and battery life. Once paired, you can control the thermostat remotely via your Z-Wave smart device or hub interface.
نوٹ: For optimal Z-Wave performance and to function as a Z-Wave repeater, the thermostat should be powered by 24VAC.
6 دیکھ بھال
6.1. تھرموسٹیٹ کی صفائی
تھرموسٹیٹ کو صاف کرنے کے لیے، نرمی سے باہر کا حصہ صاف کریں، ڈیamp cloth. Do not use abrasive cleaners, solvents, or spray cleaners directly onto the thermostat, as this may damage the unit or its electronic components.
6.2 بیٹری کی تبدیلی
If your thermostat is battery-powered, replace the four (4) AA batteries when the low battery indicator appears on the display. Ensure to use fresh, high-quality alkaline batteries. If the thermostat is 24VAC powered, battery replacement is not typically required for operation, but batteries can be installed for backup power.
- Carefully remove the front panel of the thermostat from the back panel.
- پرانی AA بیٹریاں ہٹا دیں۔
- Insert four new AA batteries, ensuring correct polarity (+/-).
- Reattach the front panel to the back panel until it snaps securely.
7 خرابیوں کا سراغ لگانا
If you encounter issues with your 2GIG-STZ-1 thermostat, refer to the following common problems and solutions:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| تھرموسٹیٹ میں کوئی پاور/خالی ڈسپلے نہیں ہے۔ | No 24VAC power; dead batteries; incorrect wiring. | Check circuit breaker for HVAC system. Replace AA batteries if battery-powered. Verify "R" and "C" wire connections. |
| HVAC سسٹم تھرموسٹیٹ کو جواب نہیں دے رہا ہے۔ | Incorrect wiring; system mode set to "Off"; Z-Wave communication issue. | Double-check wiring. Ensure system mode is set to "Heat", "Cool", or "Auto". Re-pair with Z-Wave network if controlling remotely. |
| Temperature swing is too wide. | Thermostat differential settings. | Consult the advanced settings menu (if available) or your Z-Wave controller for options to adjust temperature differential. This setting controls how far the temperature deviates from the setpoint before the system activates. |
| Z-Wave نیٹ ورک سے منسلک نہیں ہو سکتا۔ | Thermostat too far from hub; interference; incorrect pairing procedure. | Ensure thermostat is within range of the Z-Wave hub or a repeater. Follow Z-Wave hub's specific instructions for inclusion/exclusion. Ensure thermostat is 24VAC powered to act as a repeater. |
8. وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | 2GIG-STZ-1 (also known as 2GIG-STZ1-345) |
| مطابقت | 24VAC 3H/2C non-heat pump/heat pump systems with humidifier/dehumidifier support. Not compatible with 120/240 VAC systems. |
| Room Temperature Measurement Scale | Fahrenheit / Celsius (user selectable) |
| کمرے کے درجہ حرارت کی حد | 32 سے 122 ڈگری ایف (0 سے 50 ڈگری سینٹی گریڈ) |
| درجہ حرارت کی درستگی | +/- 1 degrees F (0.5 degrees C) |
| Heat Set Point Range | 32 - 90 degrees F (0 - 32 degrees C) |
| Cool Set Point Range | 61 - 122 degrees F (16 - 50 degrees C) |
| ریزولوشن ترتیب دینا | 1 ڈگری ایف (0.5 ڈگری سینٹی گریڈ) |
| پنکھے کا کنٹرول | آٹو/آن۔ |
| بجلی کی فراہمی | AC: 18-26VAC 60Hz (R and C); 4x AA size battery (6VDC) |
| آپریٹنگ درجہ حرارت کی حد | 32 سے 122 ڈگری ایف (0 سے 50 ڈگری سینٹی گریڈ) |
| آپریٹنگ نمی | 10-90 percent Non-Condensing |
| طول و عرض (H x W x D) | 5.75 x 4.5 x 1 انچ (14.6 x 11.4 x 2.5 سینٹی میٹر) |
| وزن | 1.06 پونڈ (0.48 کلوگرام) |
| کنیکٹوٹی | Z-Wave (700 سیریز) |
| ڈسپلے کی قسم | بیک لائٹ کے ساتھ LCD۔ |
9. وارنٹی کی معلومات
The 2GIG Z-Wave 700 Programmable Thermostat (Model 2GIG-STZ-1) comes with a محدود 1 سال کی وارنٹی from the manufacturer. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact 2GIG customer support.
10. کسٹمر سپورٹ
For further assistance, technical support, or warranty inquiries, please contact 2GIG customer support. You may also refer to the support resources provided by your Z-Wave hub manufacturer for integration-specific questions.
نوٹ: Manufacturer support policies may vary. Access to detailed manuals or direct support might be restricted to authorized dealers or installers in some cases.
