Lepro 40ft RGB LED Strip Lights User Manual

1. تعارف

Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.

Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.

2. باکس میں کیا ہے۔

تمام اشیاء کی موجودگی کو یقینی بنانے کے لیے براہ کرم پیکیج کے مواد کو چیک کریں:

• 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
• 1 x 44-Key IR Remote Control
• 1 x 24V Power Adapter (US Plug)

3. حفاظتی معلومات

Read all safety instructions before installation and use. Keep this manual for future reference.

• صرف اندرونی استعمال: This product is designed for indoor use and is not waterproof.
• بجلی کی فراہمی: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
• تنصیب کی سطح: یقینی بنائیں کہ زیادہ سے زیادہ چپکنے والی کارکردگی کے لیے تنصیب کی سطح صاف، خشک اور ہموار ہے۔
• پٹی کاٹنا: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
• زیادہ گرمی سے بچیں: Do not coil the LED strip tightly when powered on, as this can cause overheating.
• بچے اور پالتو جانور: Keep the product and its components out of reach of children and pets.

4. سیٹ اپ اور انسٹالیشن

مناسب تنصیب کے لیے ان اقدامات پر عمل کریں:

1. سطح تیار کریں: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
2. پیمائش اور کٹ (اگر ضروری ہو تو): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
3. پٹی منسلک کریں: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
4. Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
5. پاور سے رابطہ کریں: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
6. ریموٹ کو چالو کریں: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.

Figure 2: Visual guide for LED strip installation steps.

Figure 3: Connection diagram and remote activation.

Figure 4: 3M Adhesive and Fixing Clips.

5. آپریٹنگ ہدایات

Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.

Figure 5: 44-Key IR Remote Control Layout.

ریموٹ کنٹرول کے افعال:

• آن/آف: Power button to turn the lights on or off.
• چمک ایڈجسٹمنٹ: استعمال کریں۔ ↑ اور ↓ buttons to increase or decrease brightness.
• رنگ کا انتخاب: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
• DIY Colors: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
  • دبائیں a DIY بٹن
  • استعمال کریں۔ ↑ اور ↓ arrows next to R, G, B to adjust the intensity of each primary color.
  • وہی دبائیں۔ DIY button again to save your custom color.
• موڈ کا انتخاب: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
  • فلیش: Jumps between colors.
  • FADE3/FADE7: Fades between 3 or 7 colors.
  • JUMP3/JUMP7: Jumps between 3 or 7 colors.
  • آٹو: Cycles through all modes.
  • تیز/آہستہ: Adjusts the speed of dynamic modes.

Figure 6: Remote control in use for ambient lighting.

6 دیکھ بھال

Proper maintenance ensures the longevity of your LED strip lights.

• صفائی: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
• ذخیرہ: اگر لائٹس کو لمبے عرصے کے لیے ذخیرہ کر رہے ہیں، تو یقینی بنائیں کہ وہ صاف، خشک، اور نقصان سے بچنے کے لیے ڈھیلے طریقے سے جڑی ہوئی ہیں۔
• جھکنے سے بچیں: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.

7 خرابیوں کا سراغ لگانا

اگر آپ کو مسائل درپیش ہیں تو درج ذیل عام مسائل اور حل کا حوالہ دیں:

8. وضاحتیں

Figure 7: ETL Listed 24V Power Adapter.

9. وارنٹی اور سپورٹ

Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro webسائٹ

رابطہ کی معلومات:

• Webسائٹ: www.lepro.com (براہ کرم اہلکار کو چیک کریں۔ webتازہ ترین رابطے کی معلومات کے لیے سائٹ۔)
• ای میل: مصنوعات کی پیکیجنگ کا حوالہ دیتے ہیں یا webسائٹ