Schwalbe AV 7AP Air Plus Bicycle Inner Tube User Manual

تعارف

The Schwalbe AV 7AP (Air Plus) Bicycle Inner Tube is engineered for exceptional air pressure stability and reliability. Constructed with a high proportion of pure butyl rubber, this inner tube significantly reduces air loss, meaning less frequent pumping. Its approximately 70% higher wall thickness provides enhanced robustness, offering superior protection against punctures and flats for a safer and more enjoyable riding experience.

پروڈکٹ ختمview

This image displays the packaging for the Schwalbe AV 7AP Air Plus Bicycle Inner Tube. The box is predominantly dark grey with blue accents, featuring the 'SCHWALBE' logo and 'AIR PLUS 20"' prominently. The side of the box lists various compatible tire dimensions, indicating the tube's versatility for 20-inch wheels with widths ranging from 1.50 to 2.40 inches.

The Schwalbe Air Plus tube is designed for 20-inch bicycle wheels and is compatible with a range of tire widths. Its robust construction ensures durability and consistent performance.

سیٹ اپ اور انسٹالیشن

Proper installation is crucial for the performance and longevity of your inner tube. Follow these steps carefully:

1. تیاری:
   • سائیکل سے پہیے کو ہٹا دیں۔
   • Deflate and remove the old inner tube and tire from the rim.
   • Inspect the inside of the tire for any sharp objects (thorns, glass, etc.) that may have caused the previous puncture. Run your fingers carefully along the inside of the tire.
   • Check the rim strip (rim tape) to ensure it is properly seated and covers the spoke holes, preventing punctures from spokes.
2. Partial Inflation:

   Slightly inflate the new Schwalbe Air Plus inner tube until it just takes shape. This prevents it from twisting or pinching during installation.
3. Insert Valve:

   Insert the valve of the inner tube through the valve hole in the rim. Ensure the valve is straight and fully seated.

4. Position Tube:

   Carefully tuck the inner tube inside the tire casing, working your way around the rim. Ensure the tube is not twisted or pinched between the tire bead and the rim.

5. Mount Tire:

   Begin seating one bead of the tire onto the rim. Then, starting opposite the valve, work the second tire bead onto the rim. Use tire levers if necessary, but be careful not to pinch the inner tube.
6. Seat Tire and Inflate:

   Before fully inflating, push the valve stem up into the tire to ensure the tube base is not trapped under the tire bead. Then, slowly inflate the inner tube to the recommended pressure range indicated on your tire's sidewall. As you inflate, check that the tire beads are evenly seated on the rim.

Compatible Tire Sizes: This inner tube is designed for 20-inch wheels and is compatible with tire widths ranging from 1.50 to 2.40 inches (40-406 to 62-406 ETRTO). Always match the inner tube size to your tire's specifications.

آپریٹنگ ہدایات

Maintaining the correct tire pressure is vital for optimal performance, safety, and the lifespan of your Schwalbe Air Plus inner tube.

• تجویز کردہ دباؤ: Always refer to the pressure range (PSI or Bar) printed on the sidewall of your bicycle tire. Do not exceed the maximum pressure or go below the minimum pressure.
• باقاعدہ چیکس: Even with the Air Plus's superior air retention, it is recommended to check your tire pressure regularly, ideally before each ride or at least once a week.
• Benefits of Correct Pressure:
  • Improved rolling efficiency.
  • Enhanced grip and handling.
  • Reduced risk of pinch flats.
  • Extended tire and tube life.

دیکھ بھال

Proper maintenance will ensure the longevity and performance of your inner tube.

• دباؤ کی نگرانی: As mentioned, regularly check and adjust tire pressure. The Schwalbe Air Plus tube retains air longer, but consistent monitoring is still beneficial.
• بصری معائنہ: Periodically inspect your tires and inner tubes (when removed) for signs of wear, cuts, cracks, or embedded debris. Address any issues promptly.
• والو کی دیکھ بھال: Ensure the valve cap is always in place to protect the valve core from dirt and moisture. If using a Schrader valve, ensure the valve core is tight.
• ذخیرہ: If storing spare inner tubes, keep them in a cool, dry place away from direct sunlight, extreme temperatures, and ozone-producing devices (like electric motors), which can degrade rubber.

خرابی کا سراغ لگانا

Here are common issues and their solutions:

وضاحتیں

وارنٹی اور سپورٹ

According to the product information, there is no manufacturer guarantee provided for this item. For any product-related inquiries or support, please contact the retailer or the official Schwalbe customer service directly.

آپ اکثر خوردہ فروش پر رابطہ کی معلومات حاصل کر سکتے ہیں۔ webسائٹ یا اہلکار SCHWALBE Store on Amazon.