Hitachi WT-P200Y

Hitachi WT-P200Y Automatic Shallow Well Pump User Manual

Model: WT-P200Y

تعارف

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Hitachi WT-P200Y Automatic Shallow Well Pump. Please read this manual thoroughly before using the product and keep it for future reference.

The Hitachi WT-P200Y is an inverter-controlled automatic shallow well pump designed for reliable water supply. It features an easy-to-use control panel for convenient operation.

حفاظتی معلومات

مصنوعات کو چوٹ یا نقصان سے بچنے کے لیے ہمیشہ درج ذیل حفاظتی تدابیر پر عمل کریں۔

  • Ensure the power supply matches the pump's requirements (Single Phase 100V, 50/60Hz).
  • Do not operate the pump without water, as this can cause damage.
  • All electrical connections must be performed by a qualified electrician in accordance with local codes.
  • آپریشن کے دوران بچوں اور غیر مجاز اہلکاروں کو پمپ سے دور رکھیں۔
  • کوئی دیکھ بھال یا مرمت کرنے سے پہلے بجلی منقطع کریں۔
  • پمپ کو منجمد درجہ حرارت سے بچائیں۔

سیٹ اپ اور انسٹالیشن

Proper installation is crucial for optimal performance and longevity of your pump.

  1. پیک کھولنا: احتیاط سے پمپ کو اس کی پیکیجنگ سے ہٹا دیں۔ شپنگ کے کسی بھی نقصان کا معائنہ کریں۔
  2. جگہ کا تعین: Install the pump on a stable, level surface in a well-ventilated area, protected from direct sunlight, rain, and freezing. Ensure adequate space for maintenance.
  3. پائپنگ کنکشن:
    • Connect the suction pipe (25mm, Rc1) to the pump's suction inlet. Ensure an airtight seal to prevent air leaks.
    • Connect the discharge pipe (25mm, Rc1) to the pump's discharge outlet.
    • Use appropriate fittings and sealants to prevent leaks.
  4. پرائمنگ: Before initial operation, the pump must be primed.
    • Remove the priming plug (if applicable) or fill the pump casing with water until full.
    • Replace the plug securely.
  5. الیکٹریکل کنکشن: Connect the power cord to a grounded 100V, 50/60Hz power outlet. Ensure the circuit is protected by a suitable circuit breaker.
Hitachi WT-P200Y Pump Dimensions and Performance Curve

تصویر 1: Diagram showing the Hitachi WT-P200Y pump's dimensions and performance curve. The diagram illustrates the pump's physical measurements, including discharge and suction outlets, and a graph detailing the relationship between total head (m) and discharge volume (L/min) under various operating pressures and suction heights. This helps in planning installation and understanding operational limits.

آپریٹنگ ہدایات

The WT-P200Y features an easy-to-use control panel for selecting operating modes.

  1. ابتدائی آغاز:
    • After ensuring proper installation and priming, plug in the pump.
    • The pump will automatically start when water is demanded (e.g., opening a faucet) and stop when demand ceases.
  2. Selecting Operating Pressure Modes: The control panel allows selection of different pressure modes. Refer to the panel diagram for specific settings.
    • معیاری وضع: Provides balanced pressure for general household use.
    • ہائی پریشر موڈ: For applications requiring stronger water pressure.
    • Low Pressure Mode: For situations where reduced pressure is desired.
  3. خودکار آپریشن: The pump is designed for automatic operation. It will detect water demand and adjust its output accordingly, thanks to its inverter technology.
Hitachi WT-P200Y Control Panel and Pressure Modes

تصویر 2: Image displaying the easy-to-use control panel of the Hitachi WT-P200Y pump. The panel allows users to select from various operating pressure modes (Standard, High, Low) to suit different water usage requirements. This image also highlights the wear-resistant elastic casing technology.

دیکھ بھال

باقاعدگی سے دیکھ بھال آپ کے پمپ کی لمبی عمر اور موثر آپریشن کو یقینی بناتی ہے۔

  • ماہانہ چیکس:
    • Inspect for any visible leaks around connections.
    • Check for unusual noises or vibrations during operation.
  • سالانہ معائنہ:
    • Clean any debris from the pump's exterior.
    • Verify the condition of the power cord and plug.
    • For internal component checks, it is recommended to contact a qualified service technician.
  • موسم سرما (سرد موسم کے لیے):
    • Drain all water from the pump and piping to prevent freezing damage.
    • Store the pump in a warm, dry place if possible, or insulate it thoroughly.
Hitachi WT-P200Y Impeller and Casing Technology

تصویر 3: ایک اندرونی view of the Hitachi WT-P200Y pump, highlighting the innovative Y-shaped impeller design and the wear-resistant elastic casing. This design contributes to the pump's high lift capability and durability, reducing wear from sand and debris in the water.

خرابی کا سراغ لگانا

عام مسائل اور ان کے حل کے لیے اس سیکشن کو دیکھیں۔

مسئلہ ممکنہ وجہ حل
پمپ شروع نہیں ہوتا ہے۔ No power supply; tripped circuit breaker; motor overload. Check power connection; reset circuit breaker; allow motor to cool down.
پمپ چلتا ہے لیکن پانی نہیں پہنچایا جاتا۔ Pump not primed; air leak in suction line; low water level in well; clogged suction filter. Re-prime the pump; check all suction connections for leaks; verify well water level; clean suction filter.
کم پانی کا دباؤ۔ Partial clog in piping; incorrect pressure mode selected; worn impeller. Check and clear piping; select higher pressure mode on control panel; contact service for impeller inspection.
کثرت سے پمپ سائیکل۔ Small leak in plumbing system; pressure switch malfunction. Inspect plumbing for leaks; contact service for pressure switch check.

وضاحتیں

فیچر تفصیل
ماڈل WT-P200Y
برانڈ ہٹاچی
طاقت کا منبع پاور کی ہڈی کی قسم
والیومtage 100 Volts (Single Phase)
تعدد 50/60Hz
شرح شدہ آؤٹ پٹ 200W
واٹtagای (بجلی کی کھپت) 440 ڈبلیو
پروڈکٹ کے طول و عرض (L x W x H) 35.6 x 37.6 x 49 سینٹی میٹر
پروڈکٹ کا وزن 14 کلوگرام
زیادہ سے زیادہ بہاؤ کی شرح 35 لیٹر فی منٹ
زیادہ سے زیادہ لفٹ اونچائی 12 میٹر
رنگ گرے
لوازمات شامل ہیں۔ ہدایت نامہ
Hitachi WT-P200Y Automatic Shallow Well Pump

تصویر 4: ایک جنرل view of the Hitachi WT-P200Y Automatic Shallow Well Pump. This image provides an overall visual reference of the product's design and appearance.

وارنٹی اور سپورٹ

یہ پروڈکٹ ایک کے ساتھ آتا ہے۔ 1 سالہ صنعت کار کی وارنٹی خریداری کی تاریخ سے. وارنٹی کے دعووں کے لیے براہ کرم اپنی خریداری کا ثبوت اپنے پاس رکھیں۔

For technical support, service, or warranty inquiries, please contact Hitachi Global Life Solutions customer service. Contact information can typically be found on the official Hitachi webسائٹ یا آپ کی خریداری کی دستاویزات پر۔

Note: Unauthorized repairs or modifications will void the warranty.

متعلقہ دستاویزات - WT-P200Y

پریview ہٹاچی WT-P سیریز واٹر پمپ آپریشن دستی
یہ ہدایت نامہ Hitachi WT-P سیریز کے واٹر پمپس کے لیے آپریٹنگ ہدایات، تنصیب کے رہنما خطوط اور ٹربل شوٹنگ ٹپس فراہم کرتا ہے، بشمول WT-P100XX سے لے کر WT-P400XX کے ماڈلز۔ اس میں حفاظتی احتیاطی تدابیر، حصوں کی شناخت، اور دیکھ بھال کے طریقہ کار شامل ہیں۔
پریview ہٹاچی L200 سیریز انورٹر کوئیک ریفرنس گائیڈ
Hitachi L200 Series Inverters کے لیے ایک فوری حوالہ گائیڈ، صنعتی ایپلی کیشنز کے لیے تنصیب، آپریشن، وائرنگ، ایرر کوڈز اور پیرامیٹر سیٹنگز کی تفصیل۔
پریview ہٹاچی SJ200 سیریز انورٹر انسٹرکشن دستی
Hitachi SJ200 Series Inverter کے لیے ہدایت نامہ، سنگل فیز اور تھری فیز ان پٹ ماڈلز کا احاطہ کرتا ہے۔ تنصیب، دیکھ بھال، اور خرابیوں کا سراغ لگانے کے لیے تفصیلی حفاظتی انتباہات، احتیاطی تدابیر اور آپریشنل رہنمائی فراہم کرتا ہے۔
پریview Hitachi L200 Series Inverter Instruction Manual: سیفٹی اور آپریشن گائیڈ
Hitachi L200 Series Inverter کے لیے جامع ہدایت نامہ، محفوظ اور موثر استعمال کے لیے ضروری حفاظتی احتیاطی تدابیر، تنصیب کے رہنما خطوط، اور آپریشنل طریقہ کار کی تفصیل۔ یہ ہدایت نامہ Hitachi کی L200 سیریز VFDs کے ساتھ کام کرنے والے صارفین اور دیکھ بھال کرنے والے اہلکاروں کے لیے اہم ہے۔
پریview ہٹاچی L300P سیریز انورٹر کوئیک ریفرنس گائیڈ
Hitachi L300P Series Inverters کے لیے فوری حوالہ گائیڈ، صنعتی AC موٹر متغیر فریکوئنسی کنٹرول کے لیے تنصیب، وائرنگ، آپریشن، ایرر کوڈز، اور پیرامیٹر سیٹنگز کی تفصیل۔
پریview Hitachi SJ200 Series Inverter Instruction Manual: Installation and Safety Guide
Comprehensive instruction manual for the Hitachi SJ200 Series Inverter, covering installation, operation, safety precautions, and troubleshooting for 200V and 400V classes.