Nilight LED Light Bar 12-Inch 300W Spot Flood Combo Off-Road Light with Wiring Harness Kit User Manual

1. تعارف

Thank you for choosing the Nilight 12-inch 300W LED Light Bar. This manual provides essential information for the safe installation, operation, and maintenance of your new off-road lighting system. Please read these instructions thoroughly before installation and retain them for future reference.

2. حفاظتی معلومات

• بجلی کا کوئی بھی کام کرنے سے پہلے گاڑی کی بیٹری کو ہمیشہ منقطع کریں۔
• یقینی بنائیں کہ تمام وائرنگ کنکشن محفوظ ہیں اور شارٹ سرکٹس کو روکنے کے لیے مناسب طریقے سے موصل ہیں۔
• Do not look directly into the light bar when it is illuminated, as it can cause eye strain or damage.
• Mount the light bar securely to prevent it from dislodging during vehicle operation.
• Verify that the installation complies with all local and national regulations regarding vehicle lighting.
• Use only the provided wiring harness and fuses, or replacements with equivalent specifications.

3. پیکیج کے مشمولات

تمام اجزاء کی موجودگی کو یقینی بنانے کے لیے براہ کرم پیکیج چیک کریں:

• 1 x Nilight 12-inch 300W LED Light Bar
• 1 x 12V 5-Pin Rocker Switch
• 1 x 16AWG Wiring Harness Kit (2-lead, 12 feet extendable)
• 2 x Adjustable Mounting Brackets
• Assorted Fuses
• بڑھتے ہوئے ہارڈ ویئر (بولٹ، گری دار میوے، واشر)

This image displays the Nilight 12-inch LED light bar, featuring a triple-row spot and flood combo beam design, along with its comprehensive wiring harness kit. The kit includes a 12V 5-pin rocker switch, 16AWG wiring, and various blade fuses for installation.

4. سیٹ اپ اور انسٹالیشن

Professional installation is recommended. If installing yourself, ensure you have basic electrical knowledge and proper tools.

4.1 لائٹ بار لگانا

1. بڑھتے ہوئے مقام کا انتخاب کریں: Select a sturdy surface on your vehicle that can support the weight of the light bar and provide optimal light projection. Common locations include bumpers, roof racks, or grille guards.
2. Position Brackets: Attach the adjustable mounting brackets to the light bar using the provided hardware. Do not fully tighten yet.
3. نشان ڈرلنگ پوائنٹس: Hold the light bar in the desired position and mark the drilling points for the brackets on your vehicle.
4. سوراخ ڈرل: Carefully drill pilot holes, then enlarge them to the appropriate size for the mounting hardware.
5. Secure Light Bar: Attach the light bar with its brackets to the vehicle using the remaining mounting hardware. Adjust the angle of the light bar as needed for optimal beam direction, then fully tighten all bolts.

4.2 Wiring the Light Bar

The provided 16AWG wiring harness kit is designed for easy connection of two light fixtures (up to 180W total). This light bar is 300W, so ensure proper fuse rating and direct connection for optimal performance.

1. بیٹری منقطع کریں: شروع کرنے سے پہلے، برقی شارٹس کو روکنے کے لیے اپنی گاڑی کی بیٹری کے منفی ٹرمینل کو منقطع کریں۔
2. Connect Light Bar: Connect the positive and negative wires from the light bar to the corresponding connectors on the wiring harness. Ensure a secure and insulated connection.
3. روٹ وائرنگ ہارنس: Carefully route the wiring harness from the light bar to the desired location for the rocker switch and then to the vehicle's battery, avoiding moving parts, sharp edges, and heat sources.
4. Install Rocker Switch: Install the 5-pin rocker switch in a convenient and accessible location within the vehicle's cabin. Connect the switch wires to the harness as per the wiring diagram (typically included with the harness). The switch has built-in LEDs for visibility in the dark.
5. پاور سے جڑیں: Connect the positive wire of the wiring harness (with the inline blade fuse) to the positive terminal of the vehicle's battery. Connect the negative wire of the harness to the negative terminal of the battery or a suitable chassis ground point.
6. Verify Fuses: Ensure the inline blade fuse is correctly installed in the fuse holder. This acts as the first line of defense against overcurrent and short circuits.
7. بیٹری کو دوبارہ جوڑیں: Once all connections are secure and verified, reconnect the negative terminal of the vehicle's battery.

5. آپریٹنگ ہدایات

To operate the Nilight LED Light Bar:

1. Ensure the vehicle's ignition is on (if wired to an accessory circuit) or the battery is connected (if wired directly).
2. Locate the installed 5-pin rocker switch.
3. Press the rocker switch to turn the LED light bar ON or OFF. The switch's built-in LEDs will illuminate when the light bar is active.

6 دیکھ بھال

• صفائی: Periodically clean the lens of the light bar with a soft cloth and mild soap and water to maintain optimal light output. Avoid abrasive cleaners.
• معائنہ: Regularly check all mounting hardware and electrical connections for tightness and corrosion. Tighten any loose bolts and clean any corroded terminals.
• وائرنگ: Inspect the wiring harness for any signs of wear, fraying, or damage. Replace damaged sections immediately.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

• برانڈ: رات
• ماڈل: B09BLVTTZ2
• طاقت: 300W
• لمبائی: 12 انچ
• بیم پیٹرن: Spot Flood Combo (Triple Row, Nest Reflector Cup)
• والیومtage: 12 وولٹ ڈی سی
• روشنی کے منبع کی قسم: ایل ای ڈی
• وائرنگ کا استعمال: 16AWG, 2-Lead, 12 Feet Extendable
• سوئچ: 5-Pin Rocker Switch with built-in LEDs
• تحفظ: Inline Blade Fuse for overcurrent and short circuit
• چڑھنا: سایڈست بریکٹ
• فٹ کی قسم: یونیورسل فٹ
• گاڑی کی سروس کی قسم: Truck, SUV, Car

9. وارنٹی کی معلومات

This Nilight LED Light Bar comes with a 2 سال کی وارنٹی خریداری کی تاریخ سے. یہ وارنٹی عام استعمال کے تحت مینوفیکچرنگ نقائص اور مادی خامیوں کا احاطہ کرتی ہے۔ یہ غلط تنصیب، غلط استعمال، حادثات، یا غیر مجاز ترمیم کی وجہ سے ہونے والے نقصان کا احاطہ نہیں کرتا ہے۔ وارنٹی کے دعووں کے لیے براہ کرم اپنی خریداری کا ثبوت اپنے پاس رکھیں۔

10. کسٹمر سپورٹ

For technical assistance, warranty claims, or any questions regarding your Nilight LED Light Bar, please refer to the contact information provided on the Nilight official website or your purchase platform. When contacting support, please have your product model number (B09BLVTTT2) and proof of purchase readily available.