1. پروڈکٹ ختمview
The DieseRC Radio Frequency Light Remote Control Switch system allows for wireless control of lights and other electrical appliances. It consists of a relay receiver and two remote control transmitters, operating on a 433MHz RF frequency. This manual provides instructions for installation, setup, and operation.
2. پیکیج کے مشمولات
- 1x Relay Receiver
- 2x Transmitters (with CR2016 batteries included)
- 1x Product Manual (this document)
3. مصنوعات کی تفصیلات
| پیرامیٹر | قدر |
|---|---|
| رسیور ورکنگ والیومtage | AC 85V~240V |
| پرسکون کرنٹ | <5mA |
| زیادہ سے زیادہ موجودہ | 10A |
| آر ایف فریکوئنسی | 433MHz |
| کام کرنے کا درجہ حرارت | -30°C ~ +80°C |
| حساسیت وصول کرنا | > 97 ڈی بی ایم |
| Storage Remote Controls | 20 ٹکڑوں تک |
| سپورٹ انکوڈنگ | 1527 Learning code |
| آر ایف آپریٹنگ موڈ | سپر ہیٹروڈائن وائرلیس استقبال سے پوچھیں۔ |
| Receiving Range (Open Space) | > 50 میٹر |
| پن کنفیگریشن | N / L |
| آپریٹنگ موڈز | Momentary / Toggle / Latched Mode |
| ٹرانسمیٹر بیٹری | 2x CR2016 (شامل) |
| واٹtage | 1500 واٹ |
| زیادہ سے زیادہ سوئچنگ کرنٹ | 10 Amps |
4. تنصیب
The receiver unit is designed for easy integration into existing electrical systems. It should be installed between the power supply and the device you wish to control (e.g., a lamp). The compact size (70*38*21 mm) allows for flexible placement. Ensure all power is disconnected before installation.
The receiver is housed in a protective box for enhanced safety. No complex wiring is required for basic operation, but professional installation is recommended for those unfamiliar with electrical work.
5۔ آپریٹنگ موڈ
The receiver supports three distinct operating modes: Momentary, Toggle, and Latched. The desired mode must be set during the setup process.
5.1 لمحاتی موڈ
In Momentary Mode, the relay activates only while the remote button is pressed. Releasing بٹن ریلے کو غیر فعال کر دیتا ہے۔
- Press and hold one button on the transmitter: The connected device will turn ON.
- Release the button: The connected device will turn OFF.
5.2. ٹوگل موڈ
In Toggle Mode, each press of the remote button alternates the relay's state (ON/OFF).
- Press a button on the transmitter: The connected device will turn ON.
- دبائیں ایک ہی button again: The connected device will turn OFF.
نوٹ: The product is typically pre-set to Toggle Mode from the factory.
5.3 لیچڈ موڈ
Latched Mode requires two distinct buttons on the remote: one for ON and one for OFF.
- Press the "ON" button: The connected device will turn ON.
- Press the "OFF" button: The connected device will turn OFF.
نوٹ: This mode requires a remote with at least two distinct buttons for ON/OFF functionality.
6. سیٹ اپ اور جوڑا بنانا
To pair a transmitter with the receiver and set the operating mode, follow these steps:
6.1 لمحاتی موڈ کے لیے جوڑا بنانا
- رسیور پر لرننگ بٹن دبائیں۔ 1 بار.
- تقریباً 3 سیکنڈ تک انتظار کریں۔
- Press any button on the transmitter. The pairing is successful.
6.2 ٹوگل موڈ کے لیے جوڑا بنانا
- رسیور پر لرننگ بٹن دبائیں۔ 2 بار.
- تقریباً 3 سیکنڈ تک انتظار کریں۔
- Press any button on the transmitter. The pairing is successful.
6.3 لیچڈ موڈ کے لیے جوڑا بنانا
- رسیور پر لرننگ بٹن دبائیں۔ 3 بار.
- تقریباً 3 سیکنڈ تک انتظار کریں۔
- Press the desired "ON" button on the transmitter.
- Press the desired "OFF" button on the transmitter. The pairing is successful.
نوٹ: For Latched Mode, you need a transmitter with at least two distinct buttons to assign ON and OFF functions.
7. Resetting the Receiver
وصول کنندہ کی یادداشت سے تمام جوڑا ٹرانسمیٹر صاف کرنے کے لیے:
- رسیور پر لرننگ بٹن دبائیں۔ 8 بار لگاتار
- ری سیٹ کامیاب ہے۔
اہم: After a reset, all previously paired remote controls will no longer function with this receiver. You will need to re-pair them following the setup instructions above.
8. پروڈکٹ کی خصوصیات اور ایپلی کیشنز
The DieseRC RF Wireless Relay Module offers robust performance and versatility:
- مضبوط سگنل: The 433MHz radio frequency signal can penetrate walls, floors, and doors, providing reliable control within a 50-meter range in open areas.
- High Capacity Relay: 10 سے لیس ہے۔ Amp relay, it can handle high-power electrical appliances up to 1500W.
- پائیدار اجزاء: The high-quality relay is rated for over 400,000 operations, and the remote control transmitter buttons are designed for over 500,000 clicks.
- وسیع جلدtagای مطابقت: The receiver supports AC 85V~250V, making it suitable for 110V, 220V, 230V, and 240V systems.
- کومپیکٹ ڈیزائن: The mini size of the receiver (70*38*21 mm) and the portable key-fob style transmitters ensure convenience and discreet installation.
This system is suitable for a wide range of applications in homes, farms, factories, offices, laboratories, and supermarkets. It can remotely control various devices such as lamps, lighting fixtures, ventilation equipment, food waste disposers, and other DIY wireless projects.
9. Transmitter Details
The remote control transmitter features a simple design for ease of use.
The transmitter includes an indicator light, a silicone button for operation, and a metal keychain for portability. It is powered by two CR2016 batteries, which are replaceable.
