تعارف
This manual provides essential information for the proper installation, operation, and maintenance of your HEIMAN WS-720ES Wi-Fi Carbon Monoxide Detector. Please read it thoroughly before use and retain it for future reference.
اہم حفاظتی معلومات
Carbon monoxide (CO) is a colorless, odorless, and tasteless gas that can be fatal. This detector is designed to alert you to the presence of CO gas. It is not a substitute for proper maintenance of fuel-burning appliances or adequate ventilation.
- الارم کو کبھی نظر انداز نہ کریں۔ Investigate the source of the CO.
- ڈیٹیکٹر کو پینٹ نہ کریں۔ Paint can clog the sensor openings and prevent the alarm from functioning properly.
- Do not block the detector's vents.


پروڈکٹ ختمview
The HEIMAN WS-720ES is a compact, portable Wi-Fi enabled carbon monoxide detector designed for various environments. It features a clear 85 dB alarm and LED indicators for status.



تنصیب
The detector can be installed on flat surfaces or walls. Choose a location where CO is likely to accumulate, such as near fuel-burning appliances, but not directly above them or in areas with high humidity or extreme temperatures.
- چڑھنا: Use the provided screws and wall plugs to secure the mounting plate to a wall or ceiling. Alternatively, the detector can be placed on a flat surface.
- بیٹری کی تنصیب: Insert the two AA batteries into the battery compartment. Ensure correct polarity. The device will perform a self-test upon power-up.
- جگہ کا تعین: For optimal detection, place the detector at eye level (approximately 1.5 to 1.7 meters from the floor) in areas with potential CO sources. Avoid corners or areas obstructed by furniture.

Wi-Fi Connection and App Integration
This detector connects to your home Wi-Fi network (2.4 GHz) and integrates with the Tuya or Smartlife application for remote monitoring and notifications.
- اپلی کیشن ڈاؤن لوڈ کریں: اپنے اسمارٹ فون کے ایپ اسٹور سے "Tuya Smart" یا "Smart Life" ایپ ڈاؤن لوڈ کریں۔
- رجسٹر/لاگ ان: ایک اکاؤنٹ بنائیں یا اپنے موجودہ اکاؤنٹ میں لاگ ان کریں۔
- ڈیوائس شامل کریں: In the app, select "Add Device" and follow the on-screen instructions to add the Carbon Monoxide Detector. You may need to press the test button three times consecutively to put the device into pairing mode.
- تصدیق: Once connected, the app will display the device status and allow you to receive real-time alerts and view CO concentration levels.

ڈیٹیکٹر کو چلانا
ایل ای ڈی اشارے:
- Green LED (Power): Flashes every 30 seconds, indicating normal operation.
- Red LED (Alarm): Flashes rapidly with an audible alarm when CO is detected.
- Yellow LED (Fault/Low Battery): Indicates a fault or low battery condition.
ڈیٹیکٹر کی جانچ:
Press and hold the "Test/Silence" button for a few seconds. The alarm will sound, and the red LED will flash, indicating the unit is functioning correctly. A notification should also appear in your connected app.
Silencing an Alarm:
In case of a CO alarm, press the "Test/Silence" button to temporarily silence the audible alarm. The red LED will continue to flash until CO levels return to normal. If the alarm persists, evacuate the area immediately.

دیکھ بھال
- بیٹری کی تبدیلی: The detector uses 2 AA batteries with an estimated life of 5 years. When the yellow LED indicates low battery, replace both batteries with new ones.
- صفائی: Regularly clean the detector's exterior with a soft, damp کپڑا صفائی کے ایجنٹوں یا سالوینٹس کا استعمال نہ کریں۔
- باقاعدہ جانچ: Test the detector weekly by pressing the "Test/Silence" button.
خرابی کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Detector not powering on. | بیٹریاں غلط طریقے سے انسٹال یا ختم ہوگئیں۔ | بیٹری polarity چیک کریں؛ بیٹریاں تبدیل کریں. |
| پیلا ایل ای ڈی چمکتا ہے۔ | Low battery or internal fault. | بیٹریاں تبدیل کریں۔ اگر مسئلہ برقرار رہتا ہے تو سپورٹ سے رابطہ کریں۔ |
| Wi-Fi/App سے منسلک نہیں ہو سکتا۔ | Incorrect Wi-Fi password, 5GHz network, or device not in pairing mode. | Ensure 2.4GHz Wi-Fi, re-enter password, put device in pairing mode (press test button 3 times). |
| الارم کثرت سے بغیر ظاہری CO کے بجتا ہے۔ | False alarm due to strong fumes (e.g., cleaning products) or detector placement. | Relocate the detector away from sources of fumes. Ensure proper ventilation. |
وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | WS-720ES |
| طاقت کا منبع | DC 2*1.5V Alkaline AA LR6 batteries |
| سینسر لائف اسپین | زیادہ سے زیادہ 10 سال |
| آپریٹنگ درجہ حرارت | -10°C سے +40°C |
| آپریٹنگ نمی | 0٪ ~ 95٪ RH نان سنڈسننگ |
| الارم صوتی سطح | ≥85dB at 3m |
| الارم آؤٹ پٹ | بصری اور سمعی اشارہ |
| وارم اپ کا دورانیہ | تقریبا. 100 سیکنڈ |
| چڑھنے کا طریقہ | دیوار چڑھانا یا چھت چڑھانا |
| تعمیل کا معیار | EN 50291-1:2018 |
| بیٹری کی زندگی | 5 سال |
| طول و عرض | 83mm x 83mm x 23mm (تقریبا) |
| وزن | 230 گرام |
وارنٹی اور سپورٹ
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official HEIMAN webسائٹ خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید اپنے پاس رکھیں۔





