DieseRC کائنےٹک وائرلیس لائٹ سوئچ اور 10A ریلے ریسیور کٹ یوزر مینوئل

تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your DieseRC Kinetic Wireless Light Switch and 10A Relay Receiver Kit. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

The DieseRC Kinetic Wireless Light Switch system offers a convenient and energy-efficient solution for controlling lighting and other electrical appliances. It features a self-generating switch that requires no batteries and an RF 433 MHz relay receiver with a 10A fuse for protection.

حفاظتی معلومات

• Always disconnect power at the circuit breaker before installing or servicing the receiver.
• انسٹالیشن ایک مستند الیکٹریشن یا کسی ایسے شخص کے ذریعہ انجام دی جانی چاہئے جس کو بجلی کا کافی علم ہو۔
• Ensure the receiver's load does not exceed 1500W (10A at 110V-240V AC).
• The wireless switch is IPX4 waterproof, suitable for damp environments, but avoid submerging it in water.
• Do not attempt to repair or modify the device. Contact customer support for assistance.

سیٹ اپ اور انسٹالیشن

1. پیکیج کے مشمولات

• 1 x DieseRC Kinetic Wireless Switch
• 1 x DieseRC 10A Relay Receiver
• Mounting accessories (screws, double-sided tape)
• صارف دستی

2. جزو ختمview

The wireless switch is self-powered and measures approximately 86mm x 86mm x 11mm. The compact relay receiver measures 60mm x 43mm x 27mm and includes a learning button, indicator light, and a replaceable 10A fuse.

3. Receiver Wiring

The receiver must be wired between the power supply (AC 110V-240V) and the appliance you wish to control. Ensure power is disconnected before wiring.

1. Identify the Live (L) and Neutral (N) wires from your power supply.
2. لائیو (L) تار کو پاور سپلائی سے رسیور پر 'L INPUT' ٹرمینل سے جوڑیں۔
3. غیر جانبدار (N) تار کو پاور سپلائی سے رسیور پر 'N INPUT' ٹرمینل سے جوڑیں۔
4. Connect the Live (L) wire of your appliance (e.g., light fixture) to the 'L OUTPUT' terminal on the receiver.
5. Connect the Neutral (N) wire of your appliance to the 'N OUTPUT' terminal on the receiver.
6. یقینی بنائیں کہ تمام کنکشن محفوظ ہیں۔

The receiver is designed to handle a maximum load of 1500W and operates on AC 110V-240V. It includes a 10A fuse for overload protection.

4. Switch Placement

The kinetic wireless switch requires no wiring or batteries, offering flexible placement options:

• وال ماؤنٹ: Use the provided screws or double-sided tape to fix the switch to any wall surface.
• شیشے کی سطح: The double-sided tape allows for mounting on glass.
• پورٹیبل استعمال: The switch can be placed on a table or carried as a portable remote control.

آپریشن

1. وائرلیس سوئچ کو وصول کنندہ کے ساتھ جوڑنا

To establish communication between the wireless switch and the receiver, follow these pairing steps:

1. Press and hold the learning button on the receiver for approximately 3-5 seconds. The blue indicator light on the receiver will illuminate. Release the button.
2. Within a few seconds, press one button on the kinetic wireless wall switch once.
3. The indicator light on the receiver will flash, indicating successful pairing.

Once paired, pressing the switch will toggle the connected appliance ON or OFF.

2. Clearing the Paired Signal

To clear all paired signals from the receiver (e.g., when replacing a switch or reconfiguring):

• Press and hold the learning button on the receiver for approximately 8-10 seconds.
• The indicator light will flash multiple times, confirming that all stored signals have been cleared.

3. Multi-Control Scenarios

The system supports flexible control configurations:

• Multiple Switches, One Receiver: You can pair up to 5 wireless switches with a single receiver, allowing control from various locations (e.g., top and bottom of stairs).
• One Switch, Multiple Receivers: A single wireless switch can be paired with multiple receivers to control several appliances simultaneously or in different areas.

4. Control Distance and Signal Penetration

The system utilizes RF 433 MHz radio frequency for signal transmission. A strong signal can pass through walls, floors, and doors. The typical indoor control distance is up to 50 meters. In open outdoor spaces, the control distance can extend up to 100 meters.

دیکھ بھال

• صفائی: Wipe the switch and receiver with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• فیوز کی تبدیلی: The receiver contains a replaceable 10A fuse. If the receiver stops functioning due to an overload, disconnect power, open the fuse compartment, and replace the fuse with one of the same rating (10A).
• Self-Powered Switch: The kinetic switch does not require battery replacement. Its self-generating mechanism is designed for long-term use (over 200,000 clicks).
• ریلے کی عمر: The high-quality relay in the receiver is designed for over 400,000 operations.

خرابی کا سراغ لگانا

وضاحتیں

وارنٹی کی معلومات

DieseRC products are manufactured to high-quality standards. Specific warranty details may vary by region and retailer. Please retain your proof of purchase for any warranty claims. For detailed warranty terms, refer to the documentation provided with your purchase or contact DieseRC customer support.

کسٹمر سپورٹ

If you encounter any issues or have questions regarding your DieseRC Kinetic Wireless Light Switch and 10A Relay Receiver Kit, please contact DieseRC customer support through your retailer or the official DieseRC website. Our team is dedicated to providing assistance and resolving any concerns you may have.