LANCOM R&S یونیفائیڈ فائر وال UF-60 LTE یوزر مینوئل

1. تعارف

This manual provides essential information for the installation, operation, and maintenance of your LANCOM R&S Unified Firewall UF-60 LTE. Please read this manual thoroughly before using the device to ensure proper setup and functionality. Retain this document for future reference.

2. حفاظتی معلومات

Observe the following safety precautions to prevent damage to the device or injury to personnel:

• یقینی بنائیں کہ آلہ ایک مستحکم، سطحی سطح پر رکھا گیا ہے۔
• آلے کو نمی، انتہائی درجہ حرارت، یا براہ راست سورج کی روشنی کے سامنے نہ رکھیں۔
• صرف ڈیوائس کے ساتھ فراہم کردہ پاور اڈاپٹر استعمال کریں۔
• آلہ نہ کھولیں casinجی تمام خدمات کو اہل اہلکاروں سے رجوع کریں۔
• زیادہ گرمی سے بچنے کے لیے وینٹیلیشن کے سوراخوں کو صاف رکھیں۔

3. پیکیج کے مشمولات

تصدیق کریں کہ تمام اشیاء پیکیج میں موجود ہیں:

• LANCOM R&S Unified Firewall UF-60 LTE device
• پاور اڈاپٹر
• Two LTE Antennas
• ایتھرنیٹ کیبل
• کوئیک اسٹارٹ گائیڈ

4. آلہ ختمview

Familiarize yourself with the physical components and indicators of the UF-60 LTE firewall.

Figure 4.1: Front Panel of LANCOM UF-60 LTE
This image displays the front panel of the LANCOM UF-60 LTE Unified Firewall. The device is white with two black external antennas connected at the rear, extending upwards. On the left side of the front panel, the 'LANCOM Systems' and 'ROHDE & SCHWARZ' logos are visible. On the right side, a series of LED indicators are present. These indicators include four for Ethernet ports (labeled ETH0, ETH1, ETH2, ETH3) and additional status indicators for LTE signal, Wi-Fi, and general system status.

4.1 فرنٹ پینل کے اشارے

• ETH0-ETH3 LEDs: متعلقہ ایتھرنیٹ پورٹس کے لیے سرگرمی اور لنک کی حیثیت کی نشاندہی کریں۔
• LTE LED: Shows the status of the LTE connection (e.g., signal strength, connection active).
• سسٹم اسٹیٹس ایل ای ڈی: Indicates the overall operational status of the device.

4.2. Rear Panel Ports (Typical Configuration)

• پاور ان پٹ: فراہم کردہ پاور اڈاپٹر سے جڑتا ہے۔
• Ethernet Ports (ETH0-ETH3): For connecting to your network devices (LAN) and WAN.
• LTE Antenna Connectors: For attaching the external LTE antennas.
• سم کارڈ سلاٹ: For inserting a SIM card for LTE connectivity.
• ری سیٹ بٹن: فیکٹری ڈیفالٹ سیٹنگز کو بحال کرنے کے لیے استعمال کیا جاتا ہے۔

5. سیٹ اپ

5.1. ہارڈ ویئر کی تنصیب

1. انٹینا منسلک کریں: Screw the two LTE antennas onto the connectors at the rear of the device.
2. سم کارڈ داخل کریں: Open the SIM card slot cover and insert a valid SIM card. Ensure correct orientation.
3. نیٹ ورک کیبلز کو جوڑیں:
   • Connect your internet source (e.g., modem) to the designated WAN Ethernet port (typically ETH0).
   • Connect your local network devices (e.g., computer, switch) to the LAN Ethernet ports (ETH1-ETH3).
4. پاور سے رابطہ کریں: Plug the power adapter into the device's power input and then into an electrical outlet. The device will power on automatically.

5.2 ابتدائی کنفیگریشن رسائی

After powering on, wait for the system status LED to indicate readiness (refer to the Quick Start Guide for specific LED patterns).

1. Ensure your computer is connected to one of the LAN ports (ETH1-ETH3) of the firewall.
2. کھولنا a web براؤزر اور ڈیفالٹ IP ایڈریس درج کریں (مثال کے طور پر، http://192.168.1.1) or the hostname of the device.
3. Follow the on-screen instructions to complete the initial setup wizard, which typically includes setting up administrator credentials, network settings, and basic firewall rules.

6. ڈیوائس کو چلانا

The LANCOM R&S Unified Firewall UF-60 LTE operates primarily through its web-based management interface. This interface allows for comprehensive configuration and monitoring.

6.1 مینجمنٹ انٹرفیس تک رسائی

To access the management interface:

1. Ensure your computer is connected to the firewall's network.
2. کھولنا a web browser and navigate to the device's IP address or hostname.
3. Enter your administrator username and password.

6.2. Key Features and Configuration Areas

• نیٹ ورک کنفیگریشن: Manage WAN (LTE, Ethernet), LAN, VLANs, and routing.
• فائروال کے اصول: Define security policies, access control lists, and intrusion prevention.
• VPN: Configure Virtual Private Network connections for secure remote access or site-to-site links.
• LTE Management: Monitor LTE signal strength, data usage, and connection status.
• سسٹم کی ترتیبات: Manage user accounts, firmware updates, backups, and logging.

7 دیکھ بھال

7.1. فرم ویئر اپڈیٹس

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically performed via the web management interface under the 'System' or 'Maintenance' section. Always back up your configuration before performing a firmware update.

7.2. صفائی

Clean the device periodically with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3. Configuration Backup

It is recommended to regularly back up your device configuration. This allows for quick restoration of settings in case of an issue or when migrating to a new device.

8 خرابیوں کا سراغ لگانا

یہ سیکشن عام مسائل کو حل کرتا ہے جن کا آپ کو سامنا ہو سکتا ہے۔

• کوئی طاقت نہیں:

  Ensure the power adapter is securely connected to both the device and a working electrical outlet. Verify the power outlet is functional.

• No Internet Connection (Ethernet WAN):

  Check the Ethernet cable connection between the firewall's WAN port and your modem/internet source. Verify that your modem is operational and receiving an internet signal. Check WAN configuration in the management interface.

• کوئی انٹرنیٹ کنکشن نہیں (LTE):

  Ensure the SIM card is correctly inserted and active. Check LTE antenna connections. Verify LTE signal strength and connection status in the management interface. Contact your mobile network provider if the SIM card or service is suspected to be the issue.
• مینجمنٹ انٹرفیس تک رسائی حاصل نہیں کر سکتے:

  Verify your computer is connected to a LAN port of the firewall. Ensure your computer's IP settings are set to obtain an IP address automatically (DHCP). Try clearing your browser's cache or using a different browser. If the IP address was changed, use the new address. If all else fails, a factory reset might be necessary (refer to the Quick Start Guide for reset procedure).

9. تکنیکی تفصیلات

Note: Specifications are subject to change without notice. For the most current information, please refer to the manufacturer's official website. The "Connectivity Technology: HDMI" might be a misclassification in the source data, as firewalls typically use Ethernet for primary network connectivity.

10. وارنٹی اور سپورٹ

10.1. وارنٹی کی معلومات

The LANCOM R&S Unified Firewall UF-60 LTE comes with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are provided by Lancom Systems. Please refer to the warranty card included with your product or visit the official Lancom Systems webتفصیلی معلومات کے لیے سائٹ۔

10.2. تکنیکی معاونت

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official support portal of Lancom Systems. You may also find FAQs and additional resources there to help resolve common issues.

کارخانہ دار Webسائٹ: www.lancom-systems.com