Steinbach Poolstar Poolrunner S63 Automatic Pool Cleaner User Manual

تعارف

This user manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Steinbach Poolstar Poolrunner S63 automatic pool cleaner. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

The Poolrunner S63 is designed to automatically clean the floor of your pool, saving you time and effort. It is suitable for pools up to 18 m² and also compatible with saltwater pools up to 25 m² of floor area.

حفاظتی ہدایات

آلے کو چوٹ یا نقصان سے بچنے کے لیے ہمیشہ درج ذیل حفاظتی ہدایات پر عمل کریں:

• اس بات کو یقینی بنائیں کہ کوئی بھی دیکھ بھال یا صفائی کرنے سے پہلے بجلی کی فراہمی منقطع ہے۔
• Do not operate the cleaner if the power cord or plug is damaged.
• Keep children and pets away from the pool area while the cleaner is in operation.
• Only use the original charger and power adapter provided with the unit.
• Do not use the cleaner in water temperatures outside the specified range of 10°C to 35°C.
• Avoid operating the cleaner in ambient temperatures outside the range of 10°C to 40°C.
• Never attempt to disassemble or repair the unit yourself. Contact qualified service personnel.

پروڈکٹ ختمview

The Steinbach Poolstar Poolrunner S63 is an advanced robotic pool cleaner designed for efficient floor cleaning. Below are its key components and features:

تصویر 1: The Steinbach Poolstar Poolrunner S63 automatic pool cleaner. This image shows the overall design of the robotic cleaner, featuring its white and dark grey body, four wheels, and a central handle for easy retrieval.

• مین یونٹ: The core body housing the motor, pump, and filtration system.
• پہیے: Four robust wheels for smooth movement across the pool floor.
• Jet Nozzles: Located at the front and rear, these nozzles propel the cleaner and ensure effective cleaning by stirring debris.
• کنٹرول یونٹ: An external unit with a power cable for controlling the cleaner's operation.
• Dirt Collector: An internal compartment designed to collect debris and dirt from the pool floor.

تصویر 2: The Poolrunner S63's movement is controlled via water jet nozzles. This image highlights the cleaner's ability to navigate the pool floor using directed water propulsion.

تصویر 3: The external control unit with its power cable. This unit manages the cleaner's functions and connects to the main power supply.

تصویر 4: Accessing the large dirt collector. This image shows a hand pressing a latch to open the compartment where collected debris is stored, indicating ease of access for cleaning.

سیٹ اپ

1. پیک کھولنا: پیکیجنگ سے تمام اجزاء کو احتیاط سے ہٹا دیں۔ مستقبل کے اسٹوریج یا نقل و حمل کے لیے پیکیجنگ کو برقرار رکھیں۔
2. ابتدائی چارجنگ: Before first use, fully charge the Poolrunner S63. Connect the control unit to a power outlet and then connect it to the cleaner. The charging indicator on the control unit will show the charging status. A full charge typically takes 5-6 hours.
3. پول میں تعیناتی: Gently lower the Poolrunner S63 into the pool. Ensure it sinks to the bottom completely before activating. Avoid dropping the cleaner into the water.
4. پاور کنکشن: Once the cleaner is submerged, connect the control unit to a suitable power outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.

آپریٹنگ ہدایات

The Poolrunner S63 is designed for simple, automatic operation:

1. کلینر شروع کرنا: After setup, press the ON/OFF button on the control unit to start the cleaning cycle. The cleaner will begin its automatic cleaning pattern across the pool floor.
2. صفائی سائیکل: The cleaner operates for a predetermined cycle duration, typically around 40 minutes, as observed by users. It navigates the pool floor using its powerful jet nozzles to dislodge and vacuum debris.
3. بہترین حالات: For best results, ensure the pool water temperature is between 10°C and 35°C, and the ambient air temperature is between 10°C and 40°C.
4. آپریشن روکنا: To stop the cleaner, press the ON/OFF button on the control unit. Carefully retrieve the cleaner from the pool using its handle.

تصویر 5: The Poolrunner S63 actively cleaning the pool floor. This image demonstrates the cleaner submerged and performing its automated cleaning function.

دیکھ بھال

Regular maintenance ensures the longevity and efficiency of your Poolrunner S63:

• Emptying and Rinsing the Dirt Collector: After each cleaning cycle, or when the dirt collector is full, remove it from the unit and empty the collected debris. Rinse the collector thoroughly with clean water.
• Cleaning the Robot: Wipe down the exterior of the cleaner with a soft, damp cloth. Ensure no debris is lodged in the wheels or jet nozzles.
• فلٹر کی بحالی: If your model includes a removable filter, rinse it regularly to maintain optimal suction power.
• ذخیرہ: When not in use for extended periods, clean the unit, ensure it is dry, and store it in a cool, dry place away from direct sunlight and extreme temperatures.

خرابی کا سراغ لگانا

یہاں کچھ عام مسائل اور ان کے ممکنہ حل ہیں:

اگر آپ کو ایسے مسائل کا سامنا کرنا پڑتا ہے جو یہاں درج نہیں ہیں یا اگر تجویز کردہ حل مسئلہ کو حل نہیں کرتے ہیں، تو براہ کرم کسٹمر سپورٹ سے رابطہ کریں۔

وضاحتیں

وارنٹی اور سپورٹ

The Steinbach Poolstar Poolrunner S63 comes with a warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Steinbach webسائٹ

For technical support, spare parts, or any inquiries regarding your product, please contact Steinbach International customer service. Contact information can typically be found on the manufacturer's webسائٹ یا آپ کی خریداری کی رسید پر۔

When contacting support, please have your model number (061007AV) and purchase details ready.