بلیک اسٹار AMPED3 100W ملٹی چینل فلور بورڈ گٹار Amp پیڈل صارف دستی

تعارف

This manual provides essential information for the safe and effective operation of your Blackstar AMPED3 100W ملٹی چینل فلور بورڈ گٹار Amp Pedal. Please read this manual thoroughly before use and retain it for future reference. The AMPED3 is a compact, powerful 100-watt pedal amplifier designed for guitarists seeking versatile tone shaping, user-programmable presets, and comprehensive connectivity options for live performance, studio recording, and practice.

حفاظتی ہدایات

• بجلی کی فراہمی: Use only the specified power supply for this unit. Ensure the voltage matches your local power grid.
• وینٹیلیشن: وینٹیلیشن کے سوراخوں کو مسدود نہ کریں۔ زیادہ گرم ہونے سے بچنے کے لیے یونٹ کے ارد گرد ہوا کا مناسب بہاؤ یقینی بنائیں۔
• نمی: Keep the unit away from water or excessive moisture. Do not operate in damp ماحولیات
• ہینڈلنگ: یونٹ کو گرانے یا سخت اثرات کے تابع کرنے سے گریز کریں۔
• سروسنگ: خود یونٹ کی خدمت کرنے کی کوشش نہ کریں۔ تمام خدمات کو اہل اہلکاروں سے رجوع کریں۔
• اسپیکر کنکشن: Always ensure correct speaker impedance matching (8 or 16 Ohms) when connecting to external cabinets. Incorrect impedance can damage the ampزندگی

پروڈکٹ ختمview

دی بلیک سٹار AMPED3 features a robust design with intuitive controls and extensive connectivity. Below is an overview of the front panel controls and rear panel connections.

شکل 1: فرنٹ پینل کنٹرولز۔ یہ تصویر اوپر سے نیچے دکھاتی ہے۔ view of the Blackstar AMPED3, highlighting the Gain, Volume, Boost, Reverb, Presence, Master knobs, Bass, Middle, Treble, ISF tone controls, Power Amp Response and Power wattage selectors, and footswitches for Clean, Crunch, Overdrive, Reverb, and Boost.

شکل 2: ریئر پینل کنکشنز۔ This image shows the rear of the AMPED3, detailing the IN/OUT jacks, FX Loop (Send/Return), USB-C port, CabRig Outputs (Balanced XLR and Line Out/Phones), MIDI In/Thru, Speaker Outputs (8 Ohm, 16 Ohm), Hi Pot Output, and Mains Input.

فرنٹ پینل کنٹرولز

• حاصل کرنا: Adjusts the input gain for the selected channel.
• آواز: Controls the output volume of the selected channel.
• BOOST (PRE/POST): Activates the built-in boost. The switch determines if the boost is applied before (PRE) or after (POST) the preamp سیکشن
• REVERB (DARK/LIGHT): Controls the reverb level. The switch selects between Dark and Light reverb voicings.
• موجودگی: Adjusts the high-frequency response in the power amp سیکشن
• ماسٹر: Overall output volume control.
• باس، درمیانی، تگنا: Standard 3-band EQ controls.
• ISF (لامحدود شکل کی خصوصیت): Blackstar's patented tone control, sweeping from a classic British tone to a modern American tone.
• پاور AMP RESPONSE (EL84, EL34, 6L6): Selects the power amp valve emulation.
• POWER (1W, 20W, 100W): Selects the output wattage.
• CLEAN Footswitch: Activates the Clean channel.
• CRUNCH Footswitch: Activates the Crunch channel.
• OVERDRIVE Footswitch: Activates the Overdrive channel.
• ریورب فٹ سوئچ: Toggles the reverb effect on/off.
• BOOST (HOLD: MANUAL) Footswitch: Toggles the boost effect on/off. Holding this footswitch may engage a manual mode for channel selection.

ریئر پینل کنکشنز

• میں: گٹار ان پٹ
• باہر: Main output to other pedals or an ampزیادہ ان پٹ
• FX LOOP (SEND/RETURN): بیرونی اثرات کے پیڈل کو جوڑنے کے لیے۔
• USB-C: For connecting to a computer for recording and software control (Architect software).
• CABRIG OUTPUTS (BALANCED XLR / LINE OUT PHONES): Outputs with CabRig speaker simulation for direct connection to PA systems, audio interfaces, or headphones.
• MIDI IN/THRU: For MIDI control and integration with other MIDI devices.
• SPEAKER OUTPUTS (8 Ohm, 16 Ohm): For connecting to external guitar speaker cabinets. Use only one output at a time.
• HI POT OUTPUT: Auxiliary power output for pedals.
• مین ان پٹ: پاور کنکشن۔

سیٹ اپ

1. پاور کنکشن: Connect the supplied power cable to the MAINS INPUT on the rear panel and then to a suitable power outlet.
2. گٹار کنکشن: Connect your guitar to the IN jack on the rear panel.
3. Output Connection (Choose one):
   • To a Speaker Cabinet: Connect a speaker cable from either the 8 Ohm or 16 Ohm SPEAKER OUTPUT to your guitar speaker cabinet. Ensure the impedance matches. Do not use both speaker outputs simultaneously.
   • To a PA System/Audio Interface: Use an XLR cable from the BALANCED XLR CABRIG OUTPUT to a PA mixer or audio interface.
   • To Headphones: Connect headphones to the LINE OUT PHONES CABRIG OUTPUT.
   • To another Amplifier/Pedal: Connect a standard instrument cable from the OUT jack to the input of another amplifier or pedal.
4. FX Loop (Optional): If using external effects, connect the SEND jack to the input of your effect pedal and the output of your effect pedal to the RETURN jack.
5. USB-C (Optional): For recording or using Blackstar's Architect software, connect a USB-C cable from the AMPED3 to your computer.
6. MIDI (Optional): Connect MIDI cables to the MIDI IN/THRU ports for external MIDI control.

آپریٹنگ ہدایات

بنیادی آپریشن

1. پاور آن: Flip the power switch on the rear panel to the ON position.
2. چینل کا انتخاب: Use the CLEAN, CRUNCH, and OVERDRIVE footswitches to select your desired channel. The corresponding LED will illuminate.
3. Adjusting Tone: Use the GAIN, VOLUME, BASS, MIDDLE, TREBLE, ISF, PRESENCE, and MASTER controls to shape your sound.
4. پاور آؤٹ پٹ: مطلوبہ واٹ منتخب کریں۔tage (1W, 20W, or 100W) using the POWER switch.
5. طاقت Amp جواب: Choose between EL84, EL34, or 6L6 power amp valve emulations using the RESPONSE switch to alter the feel and breakup characteristics.

اعلی درجے کی خصوصیات

• بوسٹ فنکشن: Engage the BOOST footswitch to activate the clean boost. Use the PRE/POST switch to determine if the boost affects the preamp gain (PRE) or the overall volume after the preamp (POST).
• Reverb: Activate the REVERB footswitch. Use the REVERB knob to adjust the effect level and the DARK/LIGHT switch to select the reverb character.
• CabRig Technology: دی AMPED3 features advanced CabRig DSP speaker simulation. This allows you to fine-tune your cabinet, microphone, and room simulations for direct outputs (XLR, Line Out/Phones, USB-C). Three CabRig presets can be stored and recalled.
• USB-C Audio Interface: مربوط کریں۔ AMPED3 to your computer via USB-C to use it as an audio interface for recording. This also allows access to the Blackstar Architect software for deep editing of CabRig settings and other parameters.
• MIDI کنٹرول: دی AMPED3 supports MIDI control over all its parameters. Refer to the Blackstar website or Architect software documentation for detailed MIDI implementation charts and setup instructions.

دیکھ بھال

• صفائی: یونٹ کو نرم، خشک کپڑے سے صاف کریں۔ کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
• ذخیرہ: Store the unit in a dry, cool place away from direct sunlight and extreme temperatures.
• Footswitches and Knobs: Periodically check footswitches and knobs for smooth operation. Avoid excessive force.

خرابی کا سراغ لگانا

وضاحتیں

• ماڈل: AMPED3
• آؤٹ پٹ واٹtage: 100 Watts (selectable 1W, 20W, 100W)
• طاقت Amp جواب: EL84, EL34, 6L6 Emulations
• چینلز: Clean, Crunch, Overdrive (Multi-Channel)
• اثرات: Footswitchable Reverb (Dark/Light), Built-in Clean Boost (Pre/Post)
• اسپیکر آؤٹ پٹ: 8 Ohm, 16 Ohm (use one only)
• Direct Outputs: Balanced XLR CabRig Output, Line Out/Phones CabRig Output
• USB کنیکٹوٹی: USB-C for recording and Architect software
• MIDI: MIDI In, MIDI Thru
• FX لوپ: بھیجیں/واپس کریں۔
• معاون طاقت: Hi Pot Output (9V 500mA total)
• آئٹم کا وزن: 5.64 پاؤنڈ
• مصنوعات کے طول و عرض: 7 x 8.07 x 14.57 انچ
• مواد: دھات، پلاسٹک
• رنگ: سیاہ

وارنٹی اور سپورٹ

Blackstar products are manufactured to high standards. For warranty information, please refer to the warranty card included with your product or visit the official Blackstar Ampبندھن website. For technical support, product registration, or to download the latest Architect software and drivers, please visit www.blackstaramps.com.