پوٹر پیڈ 300-PD فوٹو ڈیٹیکٹر صارف دستی

1. تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of the POTTER PAD 300-PD Photo Detector. The PAD 300-PD is a battery-powered photoelectric smoke alarm designed to detect smoke particles and alert occupants with an audible alarm. It serves as an alternative model to the PAD200-PD.

The photoelectric sensing technology is effective at detecting slow, smoldering fires, which typically produce large smoke particles. For optimal safety, it is crucial to install and maintain this device according to the guidelines provided herein.

2. حفاظتی معلومات

Please read and understand all safety instructions before installing or operating the POTTER PAD 300-PD Photo Detector. Failure to follow these instructions may result in improper operation of the device, leading to property damage, injury, or death.

• باقاعدہ جانچ: Test the smoke detector weekly to ensure proper function.
• بیٹری کی تبدیلی: Replace batteries immediately when the low battery warning sounds. Use only recommended battery types.
• پینٹ نہ کریں: Never paint the smoke detector. Paint can clog the sensing chambers and prevent proper operation.
• مناسب جگہ کا تعین: Install smoke detectors in all sleeping areas and on every level of your home, including the basement.
• رکاوٹوں سے بچیں: Ensure the detector is not obstructed by furniture, curtains, or other objects that could block smoke entry.
• صفائی: Clean the detector regularly to prevent dust accumulation from affecting performance.

3. سیٹ اپ اور انسٹالیشن

Proper placement and installation are critical for the effective operation of your photo detector.

3.1 تجویز کردہ جگہ کا تعین

• Install at least one smoke detector on every level of your home, including the basement.
• Install a smoke detector inside every sleeping area.
• Install a smoke detector in the hallway outside of every sleeping area.
• For sloped, peaked, or cathedral ceilings, install the detector within 3 feet (0.9m) of the highest point.

3.2 سے بچنے کے لیے مقامات

• Within 20 feet (6m) of a furnace or cooking appliance.
• In extremely dusty, dirty, or insect-infested areas.
• In areas where the temperature is below 40°F (4°C) or above 100°F (38°C).
• In areas with high humidity, such as bathrooms or near showers.
• Near fresh air vents, fans, or doors that could blow smoke away from the detector.

3.3 بڑھتے ہوئے ہدایات

1. Select a suitable mounting location on a ceiling or wall, away from corners.
2. Twist the mounting bracket counter-clockwise to detach it from the detector unit.
3. Position the mounting bracket on the ceiling or wall and mark the locations for the two mounting holes.
4. Drill pilot holes if necessary and secure the mounting bracket using the provided screws.
5. Install the battery as described in Section 3.4.
6. Align the detector unit with the mounting bracket and twist clockwise until it locks securely into place.

3.4 بیٹری کی تنصیب

The POTTER PAD 300-PD is powered by a 9V battery. Ensure the battery is fresh and correctly oriented.

1. Open the battery compartment on the back of the detector unit.
2. Connect a new 9V battery to the battery clip, ensuring correct polarity (+ to + and - to -).
3. بیٹری کو کمپارٹمنٹ میں رکھیں اور کور کو محفوظ طریقے سے بند کریں۔
4. Perform an initial test as described in Section 4.2.

شکل 1: سامنے view of the POTTER PAD 300-PD Photo Detector. This image shows the circular, white smoke detector with concentric rings and a small black indicator light on its face.

4. آپریٹنگ ہدایات

Understanding the operational indicators and testing procedures is essential for ensuring your detector is functioning correctly.

4.1 عمومی آپریشن

Once installed with a fresh battery, the detector will enter normal operating mode. A small LED indicator on the front of the unit will flash approximately once every 30-40 seconds to indicate that the detector is powered and functioning correctly.

4.2 ڈیٹیکٹر کی جانچ کرنا

Test the smoke detector weekly to ensure it is working properly. To test:

1. Press and hold the test button located on the front of the detector.
2. The alarm will sound a loud, pulsating horn.
3. بٹن چھوڑ دیں۔ الارم بند ہونا چاہیے۔
4. اگر الارم نہیں بجتا ہے تو ٹربل شوٹنگ سیکشن سے رجوع کریں۔

نوٹ: The test button simulates the presence of smoke. It is important to test the detector regularly.

4.3 الارم کے حالات

When smoke is detected, the detector will emit a loud, continuous audible alarm. The LED indicator will also flash rapidly. If an alarm sounds:

• Evacuate all occupants immediately.
• Do not re-enter the premises until emergency services have declared it safe.
• If it is a false alarm, ventilate the area to clear the smoke.

5 دیکھ بھال

Regular maintenance ensures the longevity and reliability of your POTTER PAD 300-PD Photo Detector.

5.1 اپنے ڈیٹیکٹر کو صاف کرنا

Dust and debris can accumulate in the sensing chamber, potentially causing false alarms or preventing the detector from functioning correctly. Clean your detector at least once a month.

1. نرم برش اٹیچمنٹ کا استعمال کرتے ہوئے ڈیٹیکٹر کے بیرونی حصے کو آہستہ سے ویکیوم کریں۔
2. Do not use cleaning sprays or solvents on the detector.
3. Do not remove the cover of the detector for cleaning.

5.2 بیٹری کی تبدیلی

The detector will chirp approximately once every 30-40 seconds when the battery is low. Replace the battery immediately when this occurs.

1. ڈٹیکٹر کو بڑھتے ہوئے بریکٹ سے ہٹانے کے لیے اسے گھڑی کی مخالف سمت میں موڑ دیں۔
2. بیٹری کا ٹوکری کھولیں۔
3. Disconnect the old 9V battery and dispose of it properly.
4. Connect a new 9V battery, ensuring correct polarity.
5. Close the battery compartment and reattach the detector to the mounting bracket by twisting clockwise until it locks.
6. Test the detector after battery replacement (refer to Section 4.2).

6 خرابیوں کا سراغ لگانا

If your POTTER PAD 300-PD Photo Detector is not functioning as expected, consult the following table for common issues and solutions.

7. وضاحتیں

• برانڈ: کمہار
• ماڈل: PAD 300-PD
• سینسر کی قسم: فوٹو الیکٹرک
• طاقت کا منبع: بیٹری سے چلنے والا (9V)
• الارم کی قسم: قابل سماعت
• UPC: 737214687030
• حصہ نمبر: PPAD300PD
• Alternative Model: PAD200-PD

8. وارنٹی اور سپورٹ

For warranty information or technical support regarding your POTTER PAD 300-PD Photo Detector, please contact POTTER customer service. Details for contacting support are typically found on the product packaging or the manufacturer's official webسائٹ

Please have your model number (PAD 300-PD) and purchase information ready when contacting support.