Mitutoyo 543-730B ABSOLUTE Digimatic Digital Indicator User Manual

1. تعارف

This manual provides comprehensive instructions for the safe and effective use of the Mitutoyo 543-730B ABSOLUTE Digimatic Digital Indicator, model ID-C0550NXB. This precision instrument is designed for accurate linear measurements and features a clear digital display, tolerance judgment capabilities, and data output functionality. Please read this manual thoroughly before operating the device to ensure proper handling and to maximize its performance and longevity.

2. حفاظتی معلومات

Observe the following safety precautions to prevent injury and damage to the instrument:

• Handle the indicator with care. Avoid dropping or subjecting it to strong impacts.
• Do not disassemble or modify the instrument. Unauthorized modifications can lead to malfunction and void the warranty.
• Keep the instrument away from direct sunlight, high temperatures, high humidity, and excessive dust.
• Avoid exposing the instrument to strong magnetic fields or static electricity.
• Use only the specified battery type if replacement is required.
• Ensure the measuring surface is clean before taking measurements to maintain accuracy.

3. پروڈکٹ ختمview

The Mitutoyo 543-730B is a high-precision digital indicator designed for various measurement applications. It features an ABSOLUTE encoder, eliminating the need for zero-setting after power-on or battery replacement. The clear LCD displays measurements and an analog bar for quick visual reference.

تصویر 1: Mitutoyo 543-730B ABSOLUTE Digimatic Digital Indicator. The image shows the main unit with its digital display, control buttons (MODE, ZERO/SET, PRESET/ABS, DATA, ON/OFF), and the measuring spindle extending downwards.

کلیدی اجزاء:

• ڈیجیٹل LCD ڈسپلے: Shows measurement values, units (mm/inch), and an analog bar indicator.
• MODE Button (F1): Used to switch between various display modes or functions.
• ZERO/SET Button (F2): Sets the current position to zero or confirms settings.
• PRESET/ABS Button: Toggles between ABSOLUTE and incremental measurement modes, or sets a preset value.
• DATA Button (F3): Used for data output to external devices.
• آن/آف بٹن: یونٹ کو آن یا آف کرتا ہے۔
• Measuring Spindle: The movable rod that contacts the workpiece for measurement.
• تنا: The cylindrical part used for mounting the indicator.

4. سیٹ اپ

4.1 Battery Installation (If Required)

The indicator typically comes with a battery pre-installed. If battery replacement is necessary:

1. Carefully remove the battery cover, usually located on the back or side of the unit.
2. Insert a new SR44 (or equivalent) silver oxide button cell battery with the positive (+) side facing up.
3. بیٹری کور کو محفوظ طریقے سے تبدیل کریں۔

4.2 انڈیکیٹر لگانا

Mount the indicator securely using its stem into a suitable stand or fixture. Ensure the mounting is rigid to prevent any movement during measurement, which could affect accuracy.

5. آپریٹنگ ہدایات

5.1 پاور آن/آف

• پاور آن کرنے کے لیے، دبائیں۔ آن/آف بٹن
• بجلی بند کرنے کے لئے ، دبائیں اور دبائیں آن/آف button until the display turns off. The ABSOLUTE position is retained even when powered off.

5.2 صفر کی ترتیب

The ABSOLUTE system eliminates the need for repeated zero-setting. However, for incremental measurements:

1. Bring the measuring spindle into contact with the reference surface or workpiece.
2. دبائیں ZERO/SET button to set the display to zero at that position.

5.3 ABSOLUTE and Incremental Modes

دبائیں PRESET/ABS button to toggle between ABSOLUTE (ABS) and incremental (INC) measurement modes. In ABS mode, the origin is maintained even after power off. In INC mode, you can set a temporary zero at any point.

5.4 Unit Conversion (mm/inch)

دبائیں موڈ button to cycle through available display options, which may include unit conversion between millimeters (mm) and inches (in), depending on the model configuration.

5.5 Tolerance Judgment

This indicator allows for Go/No-Go judgments by setting upper and lower tolerance limits. Refer to the detailed instructions in the full product manual for setting these limits using the موڈ اور ZERO/SET buttons. The analog bar indicator assists in visualizing the measurement relative to these limits.

5.6 ڈیٹا آؤٹ پٹ

The indicator is equipped with a data output port. To transmit measurement data to an external device (e.g., computer, data processor), connect a compatible Mitutoyo data cable to the port and press the ڈیٹا button. Ensure the receiving device is properly configured to accept data.

6 دیکھ بھال

6.1 صفائی

Wipe the instrument with a soft, dry cloth. For stubborn dirt, a cloth lightly dampened with a neutral detergent may be used, followed by a dry wipe. Do not use organic solvents (e.g., thinner, benzene) as they may damage the finish or internal components.

6.2 اسٹوریج

Store the indicator in its original case or a protective container in a clean, dry environment, away from direct sunlight, extreme temperatures, and humidity. Ensure the measuring spindle is retracted or protected to prevent damage.

6.3 بیٹری کی تبدیلی

Replace the battery when the low battery indicator appears on the display or when the display becomes dim or unresponsive. Refer to section 4.1 for battery installation instructions. Dispose of used batteries according to local regulations.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

9. وارنٹی اور سپورٹ

Mitutoyo products are manufactured to high standards and typically come with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Mitutoyo website. For technical support, service, or inquiries regarding your Mitutoyo 543-730B Digital Indicator, please contact your local Mitutoyo distributor or customer service center. Contact information can usually be found on the official Mitutoyo webسائٹ: www.mitutoyo.com.