1. تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of your FSP Dagger Pro 850W SFX Power Supply. The FSP Dagger Pro series is designed for small form factor (SFX) systems, offering high efficiency and reliable power delivery for demanding components.
Key features of the FSP Dagger Pro 850W SFX Power Supply include:
- ATX 3.1 / PCIe 5.1 Compliance: Equipped with a native 12VHPWR connector and cable, supporting the latest generation hardware power demands.
- مکمل طور پر ماڈیولر ڈیزائن: Allows for connecting only necessary cables, improving airflow and reducing cable clutter within compact PC builds.
- Compact SFX Form Factor: Compatible with most Mini-ITX and Micro ATX cases, ideal for small form factor PCs.
- 80 پلس گولڈ کی تصدیق شدہ کارکردگی: Achieves over 90% efficiency at typical loads, contributing to lower power consumption, reduced heat output, and quieter operation.
- سنگل +12V ریل ڈیزائن: Provides full power to VGA cards individually, preventing overloading conditions.
Image 1.1: FSP Dagger Pro 850W SFX Power Supply, showcasing its compact design and modular cable interface.
2. حفاظتی معلومات
WARNING: Improper installation or use can result in serious injury or damage to equipment. Please read and follow all instructions carefully.
- Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply.
- پاور سپلائی یونٹ نہ کھولیں۔ اعلی والیومtages اندر موجود ہیں، اور صارف کے قابل خدمت حصے نہیں ہیں۔ یونٹ کھولنے سے وارنٹی ختم ہو جائے گی۔
- Ensure the power supply is installed in a well-ventilated area. Do not block any ventilation openings.
- Use only the modular cables provided with this power supply. Using third-party cables may cause damage to the PSU or connected components.
- This product is designed for use in computer systems. Do not use it for any other purpose.
- Keep the power supply away from water, moisture, and extreme temperatures.
3. پیکیج کے مشمولات
تصدیق کریں کہ آپ کے پیکیج میں درج ذیل آئٹمز ہیں:
- FSP Dagger Pro 850W SFX Power Supply Unit
- Modular Cable Set (including 12VHPWR, Motherboard 24-pin, CPU 8-pin, PCIe 6+2-pin, SATA, Peripheral)
- AC پاور کورڈ
- بڑھتے ہوئے پیچ
- صارف دستی (یہ دستاویز)
Image 3.1: Illustration of the compact dimensions of the Dagger Pro PSU and the included modular cable set.
4. سیٹ اپ اور انسٹالیشن
Follow these steps to install your FSP Dagger Pro 850W SFX Power Supply into your computer system.
4.1. جسمانی تنصیب
- اپنا سسٹم تیار کریں: Ensure your computer is powered off and the power cord is disconnected from the wall outlet. Open your computer case to access the power supply mounting area.
- Remove old PSU (if applicable): If replacing an existing power supply, disconnect all cables from components and remove the old PSU from the case.
- Mount the new PSU: Carefully place the FSP Dagger Pro 850W into the SFX power supply bay of your case. Secure it using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow, typically facing inwards or downwards depending on case design.
Image 4.1: The FSP Dagger Pro PSU mounted in a system, highlighting the rear power switch and AC input.
4.2. کیبل کنکشنز
The Dagger Pro 850W is a fully modular power supply. Connect only the cables required for your system components.
تصویر 4.2: تفصیلی view of the modular cable connection panel on the PSU.
- Motherboard Power (24-pin): Connect the 24-pin ATX cable from the PSU to the corresponding port on your motherboard. Ensure it clicks into place.
- CPU Power (4+4-pin or 8-pin): Connect the CPU power cable(s) from the PSU to the CPU power connector(s) on your motherboard. High-end motherboards may require two 8-pin connectors.
- PCIe Power (6+2-pin or 12VHPWR):
- For graphics cards requiring 6-pin or 8-pin PCIe connectors, use the provided 6+2-pin cables.
- For NVIDIA RTX 40 series graphics cards or other GPUs requiring the new 12VHPWR connector, use the dedicated 12VHPWR cable. Ensure it is fully seated into both the PSU and the graphics card.
Image 4.3: The 12VHPWR connector on the Dagger Pro PSU, designed for modern high-power graphics cards.
- سیٹا پاور: SATA پاور کیبلز کو اپنے SSDs، HDDs، اور آپٹیکل ڈرائیوز سے جوڑیں۔
- پیریفرل پاور (مولیکس): Connect peripheral power cables for case fans, fan controllers, or other accessories that use Molex connectors.
- کیبل مینجمنٹ: اپنے کیس کے اندر ہوا کے بہاؤ اور جمالیات کو بہتر بنانے کے لیے کیبلز کو صفائی سے روٹ کریں۔
5. آپریٹنگ ہدایات
Once all components are connected and secured, you can power on your system.
- AC پاور کو جوڑیں: Plug the AC power cord into the power supply's inlet and then into a wall outlet or surge protector.
- پاور آن PSU: Flip the power switch on the back of the power supply to the "ON" (I) position.
- پاور آن سسٹم: اپنے کمپیوٹر کیس پر پاور بٹن دبائیں۔
5.1. Fan Operation (Semi-Fanless Mode)
The FSP Dagger Pro 850W features a semi-fanless design for optimized low-noise operation. The fan will remain off (0dBA) under low load conditions (typically below 20% load or <25°C internal temperature). As the load increases, the fan will gradually spin up to maintain optimal temperatures, ensuring quiet operation when not under heavy demand.
Image 5.1: Fan operation curve illustrating the semi-fanless mode for reduced noise at low loads.
6 دیکھ بھال
مناسب دیکھ بھال آپ کی بجلی کی فراہمی کی لمبی عمر اور بہترین کارکردگی کو یقینی بناتی ہے۔
- صفائی: Periodically clean the exterior of the power supply and its fan grill to prevent dust buildup. Use compressed air to gently clear dust from the fan and vents. Always disconnect the power cord before cleaning.
- ہوا کا بہاؤ: Ensure that the power supply's intake and exhaust vents are not obstructed. Maintain good airflow within your computer case to prevent overheating.
- کیبل معائنہ: Occasionally check all cable connections to ensure they are secure and free from damage.
7 خرابیوں کا سراغ لگانا
If you encounter issues with your FSP Dagger Pro 850W power supply, refer to the following common problems and solutions:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| سسٹم آن نہیں ہے۔ |
|
|
| سسٹم پاور آن لیکن فوری طور پر بند ہو جاتا ہے۔ |
|
|
| پنکھا نہیں گھوم رہا ہے۔ |
|
|
If the problem persists after trying these solutions, please contact FSP customer support.
8. وضاحتیں
Detailed specifications for the FSP Dagger Pro 850W SFX Power Supply (SDA2-850-G5):
| فیچر | تفصیل |
|---|---|
| ماڈل کا نام | SFX PSU |
| آئٹم ماڈل نمبر | SDA2-850-G5 |
| فارم فیکٹر | ایس ایف ایکس |
| آؤٹ پٹ واٹtage | 850 واٹ |
| 80 پلس سرٹیفیکیشن | سونا |
| ATX سٹینڈرڈ | ATX 3.1 |
| PCIe سٹینڈرڈ | PCIe 5.1 (with native 12VHPWR) |
| ماڈیولرٹی | مکمل ماڈیولر |
| کولنگ کا طریقہ | Air (92mm fan, semi-fanless) |
| پروڈکٹ کے طول و عرض (L x W x H) | 5 x 4 x 2.5 انچ (125 x 100 x 63.5 ملی میٹر) |
| شے کا وزن | 4.51 پاؤنڈ (2.05 کلوگرام) |
| ہم آہنگ آلات | Computer, PC |
| کارخانہ دار | FSP Group U.S.A |
Image 8.1: Explanation of the single +12V rail design for stable power to VGA cards.
9. وارنٹی اور سپورٹ
The FSP Dagger Pro 850W SFX Power Supply comes with a 10 سالہ صنعت کار کی وارنٹی، طویل مدتی وشوسنییتا اور ذہنی سکون کو یقینی بنانا۔ یہ وارنٹی عام استعمال کے تحت مواد اور کاریگری میں نقائص کا احاطہ کرتی ہے۔
For technical support, warranty claims, or further assistance, please visit the official FSP webسائٹ یا ان کے کسٹمر سروس ڈیپارٹمنٹ سے رابطہ کریں۔ وارنٹی کی توثیق کے لیے اپنی خریداری کا ثبوت اپنے پاس رکھیں۔
FSP Official Webسائٹ: https://www.fsplifestyle.com/
