Xnbada RC01RF Wireless 2.4G RF 4-Zone Single Color Remote Control User Manual

1. تعارف

The Xnbada RC01RF is a wireless 2.4G RF remote control designed for single color LED strip lights. It offers 4-zone control, allowing you to manage multiple groups of LED strips independently or simultaneously. This remote features precise brightness adjustment and operates wirelessly up to 30 meters (98 feet), providing flexible control without complex wiring. It is compatible with Xnbada C01W, C01Z, and C01RF single color controllers.

2. حفاظتی معلومات

• استعمال سے پہلے تمام ہدایات کو احتیاط سے پڑھیں۔
• یہ آلہ صرف اندرونی استعمال کے لیے ہے۔
• Do not expose the remote control to moisture or extreme temperatures.
• صرف AAA بیٹریاں استعمال کریں جیسا کہ بیان کیا گیا ہے۔ بیٹریاں ڈالتے وقت درست قطبیت کو یقینی بنائیں۔
• بچوں کی پہنچ سے دور رکھیں۔
• Do not attempt to disassemble or repair the remote control. This will void the warranty.

3. پیکیج کے مشمولات

تصدیق کریں کہ تمام اشیاء آپ کے پیکیج میں موجود ہیں:

• Xnbada RC01RF Wireless Remote Control (Single Color)
• وال ماؤنٹ ہولڈر
• بڑھتے ہوئے پیچ (2x)

Image: The Xnbada RC01RF remote control shown with its included wall mount holder and two mounting screws.

4. پروڈکٹ ختمview

The RC01RF remote control features an intuitive layout for easy operation of your single color LED strip lights. Below is a diagram illustrating the functions of each button.

Image: Diagram showing the Xnbada RC01RF remote control with labels for each button's function, including ON/OFF, brightness adjustment, and zone selection.

• آن بٹن: Press to turn ON all linked devices.
• آف بٹن: Press to turn OFF all linked devices.
• Brightness Ring: Touch the slider to adjust brightness from 1% to 100%.
• Brightness Up (☀): چمک بڑھانے کے لیے دبائیں۔
• Brightness Down (☁): چمک کم کرنے کے لیے دبائیں۔
• M بٹن: Cycles through dynamic modes (if supported by the connected controller for single color).
• 30% چمک: Press to set brightness to 30%.
• 60% چمک: Press to set brightness to 60%.
• 100% چمک: Press to set brightness to 100%.
• S- Button: Decreases dynamic mode speed.
• S+ Button: Increases dynamic mode speed.
• Zone 1-4 Buttons: Press to select a specific zone for control. Press and hold to link/unlink a controller to that zone.

5. سیٹ اپ

5.1 بیٹری کی تنصیب

The RC01RF remote control requires two AAA batteries (not included).

1. ریموٹ کے پچھلے حصے پر بیٹری کے ٹوکری کا احاطہ تلاش کریں۔
2. کور کو کھول کر سلائیڈ کریں۔
3. درست قطبیت (+ اور -) کو یقینی بناتے ہوئے دو AAA بیٹریاں داخل کریں۔
4. بیٹری کے کمپارٹمنٹ کور کو واپس اپنی جگہ پر سلائیڈ کریں جب تک کہ یہ محفوظ طریقے سے کلک نہ کرے۔

5.2 Pairing the Remote Control with a Controller

The RC01RF remote control uses 2.4G RF technology for a fast and direct connection to compatible controllers (e.g., C01W, C01Z, C01RF) without requiring Wi-Fi, Bluetooth, or an app.

1. Ensure your LED strip controller is powered off.
2. Power on the LED strip controller.
3. Within 3 seconds of powering on the controller, press and hold one of the Zone buttons (1, 2, 3, or 4) on the RC01RF remote control.
4. If pairing is successful, the connected LED strip will flash three times. This indicates the controller is now linked to the selected zone on your remote.
5. Repeat this process for other controllers if you wish to assign them to different zones (1-4). Each zone can control multiple controllers.

To unlink a controller from a zone, power cycle the controller, and within 3 seconds, press the corresponding Zone button 5 times quickly. The LED strip will flash 10 times to confirm unlinking.

5.3 وال ماؤنٹ انسٹالیشن

The included wall mount holder allows for convenient storage and access to your remote control.

1. Choose a suitable location on a wall or flat surface.
2. Use the wall mount holder as a template to mark the positions for the two mounting screws.
3. اگر ضروری ہو تو پائلٹ سوراخ ڈرلیں۔
4. Secure the wall mount holder to the surface using the provided screws.
5. ہولڈر میں ریموٹ کنٹرول داخل کریں۔

Image: The Xnbada RC01RF remote control shown securely placed in its wall-mounted holder, demonstrating flexible placement options.

6. آپریٹنگ ہدایات

6.1 Basic Control (All Zones)

• آن/آف کریں: دبائیں ON button to turn on all linked lights. Press the آف button to turn off all linked lights.
• چمک ایڈجسٹمنٹ: کو چھوئے۔ چمک کی انگوٹی to smoothly adjust the light intensity from 1% to 100%. Alternatively, use the چمک اوپر۔ (☀) اور چمک نیچے۔ (☁) buttons for incremental adjustments.
• پیش سیٹ چمک: Use the dedicated buttons to quickly set brightness to 30%, 60%، یا 100%.

Image: An illustration demonstrating brightness adjustment using the remote control in a kitchen setting, showing a slider for precise control.

6.2 4-Zone Group Control

The RC01RF remote allows you to control up to four independent zones of single color LED strip lights.

• ایک زون منتخب کریں: مطلوبہ دبائیں Zone button (1, 2, 3, or 4) to select that zone. Once selected, any commands (ON/OFF, brightness) will only apply to the controllers linked to that specific zone.
• Control All Zones: To control all linked zones simultaneously, ensure no specific zone button is actively selected (or press the currently active zone button again to deselect it, if applicable, or simply use the master ON/OFF).
• Auto-Transmission: The remote control utilizes an auto-transmission feature. If a controller is within 30 meters of another controller, the signal can be transmitted, extending the effective control distance for larger installations.

Image: Diagram illustrating the simultaneous auto-transmission feature, where the remote signal is relayed between controllers within a 30-meter range, extending control distance.

6.3 Dynamic Modes (if applicable)

If your connected single color controller supports dynamic modes (e.g., flashing, fading effects), you can activate them:

• دبائیں ایم بٹن to cycle through available dynamic modes.
• استعمال کریں۔ S- اور S+ buttons to decrease or increase the speed of the selected dynamic mode.

7 دیکھ بھال

7.1 بیٹری کی تبدیلی

When the remote control's range decreases or it becomes unresponsive, it may be time to replace the batteries.

1. بیٹری کے ڈبے کو کھولنے کے لیے سیکشن 5.1 میں درج مراحل پر عمل کریں۔
2. پرانی AAA بیٹریاں ہٹا دیں۔
3. دو نئی AAA بیٹریاں داخل کریں، درست قطبیت کا مشاہدہ کریں۔
4. بیٹری کی ٹوکری بند کریں۔

استعمال شدہ بیٹریوں کو مقامی ضابطوں کے مطابق تلف کریں۔

7.2 صفائی

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

8 خرابیوں کا سراغ لگانا

9. وضاحتیں

Image: A visual representation of various compatible Xnbada LED controllers, including C01W, C02W, C03W, C04W, C05W, WB5, FUT037, C01Z, C02Z, C03Z, C04Z, C05Z, LM051, and LM053.

10. وارنٹی اور سپورٹ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xnbada store on Amazon:

Xnbada Official Store

If you encounter any issues not covered in this manual, please contact Xnbada customer service for assistance.