تعارف
The Phrozen Cure Mega S is an advanced resin curing station designed for post-processing 3D printed models. It features both drying and UV curing functions, a 360-degree transparent turntable, and dual high-speed fans to ensure efficient and uniform curing of large and small models. This manual provides essential information for the safe and effective operation, setup, and maintenance of your Phrozen Cure Mega S.
حفاظتی معلومات
Please read all safety instructions carefully before operating the device to prevent injury or damage.
- Always wear appropriate personal protective equipment (PPE), such as gloves and eye protection, when handling uncured resin or models that have not been fully cured.
- Ensure the device is placed on a stable, level surface away from direct sunlight and flammable materials.
- Do not look directly at the UV light source during operation.
- بجلی کے جھٹکے سے بچنے کے لیے آلے کو پانی یا دیگر مائعات سے دور رکھیں۔
- صفائی یا دیکھ بھال کرنے سے پہلے آلہ کو پاور آؤٹ لیٹ سے ان پلگ کریں۔
- بچوں اور پالتو جانوروں کی پہنچ سے دور رکھیں۔
پروڈکٹ ختمview
The Phrozen Cure Mega S is a robust curing station designed for large-scale and high-volume post-processing. Its intuitive design allows for easy access and efficient operation.
تصویر: سامنے view of the Phrozen Cure Mega S curing station, showcasing its compact, black enclosure with a transparent orange-tinted door.
کلیدی اجزاء
- Main Curing Chamber: The enclosed space where models are dried and cured.
- Transparent Turntable: Rotates models 360 degrees for even curing.
- UV روشنی کا ذریعہ: Emits 405nm UV light for resin solidification.
- High-Speed Fans: Two fans for efficient drying of models.
- ٹچ پینل: User interface for controlling drying and curing settings.
- ہٹنے والا ریک: Allows for flexible curing of various model sizes.
- Side-Swing Door: Provides easy access to the curing chamber.
- Built-In Interior Light: Illuminates the chamber for monitoring progress.
Image: Visual representation of the Phrozen Cure Mega S's smart design, highlighting the side-swing door, interior lighting, and the touch panel interface.
سیٹ اپ
Follow these steps for the initial setup of your Phrozen Cure Mega S.
- ڈیوائس کو کھولیں: Carefully remove the Phrozen Cure Mega S from its packaging. Retain all packaging materials for future transport or storage.
- ایک مقام کا انتخاب کریں: Place the curing station on a flat, stable, and heat-resistant surface in a well-ventilated area. Ensure there is sufficient space around the unit for air circulation.
- پاور سے رابطہ کریں: Plug the power cord into the power input port on the back of the unit, then plug the other end into a grounded electrical outlet.
- Install Turntable: Place the transparent turntable securely onto the rotating mechanism inside the curing chamber.
- Optional Rack Installation: If curing smaller or multiple models, install the removable rack at the desired height within the chamber.
- پاور آن: Press the power button on the touch panel to turn on the device.
آپریشن
The Phrozen Cure Mega S offers versatile drying and curing options for your 3D printed models.
Drying and Curing Functions
The device allows you to select between drying, curing, or a combined dry and cure cycle.
- خشک کرنے کا طریقہ: Utilizes dual high-speed fans (1700 RPM) to quickly dry models, removing residual alcohol or moisture after washing.
- Curing Mode: Activates the 405nm UV light source to solidify resin models, enhancing their hardness and durability. The 360-degree light source and rotating turntable ensure uniform exposure.
- Dry & Cure Mode: Performs a drying cycle followed by a curing cycle automatically, streamlining the post-processing workflow.
Image: Depicts the Phrozen Cure Mega S in operation, highlighting its dual-action drying (1700 RPM) and 360-degree curing capabilities.
ٹچ پینل کا استعمال
The touch panel provides intuitive control over the device's functions.
- موڈ منتخب کریں: On the main screen, tap the desired mode: Fan + Cure (Dry & Cure), UV Cure، یا پنکھا (Drying).
- وقت مقرر کریں: Use the '+' and '-' buttons to adjust the duration for the selected mode. Recommended curing times vary based on resin type and model size.
- سائیکل شروع کریں: Press the 'Start' button to begin the process. The interior light will activate, and the turntable will begin to rotate.
- پیشرفت کی نگرانی کریں: Use the built-in interior light to observe the drying or curing state of your models through the transparent door.
- اختتامی سائیکل: The device will automatically stop once the set time has elapsed. You can also manually stop the cycle by pressing the 'Stop' button.
Image: Illustrates the detachable rack feature, showing how it accommodates both large single models and multiple smaller models for flexible curing.
دیکھ بھال
Regular maintenance ensures optimal performance and longevity of your Phrozen Cure Mega S.
- Cleaning the Chamber: After each use, especially if resin spills occur, wipe down the interior of the curing chamber with a soft cloth dampened with isopropyl alcohol (IPA). Ensure the device is unplugged.
- ٹرنٹیبل کی صفائی: Remove the turntable and clean it with IPA. Ensure it is completely dry before placing it back into the unit.
- بیرونی صفائی: بیرونی سطحوں کو نرم، خشک کپڑے سے صاف کریں۔ کھرچنے والے کلینر یا سالوینٹس کے استعمال سے پرہیز کریں۔
- UV روشنی کا ذریعہ: Periodically check the UV LEDs for any dust or residue and gently clean them with a soft, dry cloth if necessary.
- ذخیرہ: جب لمبے عرصے تک استعمال میں نہ ہوں تو، آلے کو براہ راست سورج کی روشنی سے دور، ٹھنڈی، خشک جگہ پر اسٹور کریں۔
خرابی کا سراغ لگانا
This section addresses common issues you might encounter with your Phrozen Cure Mega S.
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| ڈیوائس آن نہیں ہوتی ہے۔ | Power cord not properly connected; no power from outlet. | بجلی کی ہڈی کا کنکشن چیک کریں۔ دوسرے آلے کے ساتھ آؤٹ لیٹ کی جانچ کریں۔ |
| UV light not activating. | Curing mode not selected; door not fully closed. | Ensure 'UV Cure' or 'Fan + Cure' mode is selected. Close the door securely. |
| ٹرنٹیبل گھومنے والا نہیں۔ | Turntable not properly seated; obstruction. | Re-seat the turntable. Check for any debris obstructing rotation. |
| Models not curing evenly. | Insufficient curing time; models too close together. | Increase curing time. Ensure models are spaced adequately on the turntable. |
| Models not drying effectively. | Drying mode not selected; fans obstructed. | Ensure 'Fan' or 'Fan + Cure' mode is selected. Check for obstructions near fan vents. |
وضاحتیں
Technical specifications for the Phrozen Cure Mega S.
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | CUREMEGAS00US |
| مصنوعات کے طول و عرض | 15.6"D x 18.7"W x 19.1"H (39.5cm W x 47.5cm D x 48.6cm H) |
| شے کا وزن | 15 کلوگرام (33.07 پاؤنڈ) |
| مواد | دھات |
| Curing Wavelength | 405nm UV Light |
| پنکھے کی رفتار | 1700 RPM (Dual Fans) |
| Turntable Rotation | 360 ڈگری |
| کارخانہ دار | PHROZEN TECH CO., LTD. |
| پہلی دستیاب تاریخ | 9 اگست 2023 |
Image: Diagram showing the physical dimensions of the Phrozen Cure Mega S: 47.5cm depth, 39.5cm width, and 48.6cm height.
وارنٹی اور سپورٹ
For warranty information, technical support, or service inquiries, please contact Phrozen customer support through their official webسائٹ یا خوردہ فروش جہاں پروڈکٹ خریدی گئی تھی۔
آن لائن وسائل: Visit the official Phrozen website for FAQs, updated drivers, and additional support materials.
رابطہ کی معلومات: Refer to your purchase documentation or the Phrozen webمخصوص رابطے کی تفصیلات کے لیے سائٹ۔
