JIARUIXIN CST-1A 2.4G Bluetooth Remote Control and CSR-12T Receiver Instruction Manual

تعارف

This manual provides essential instructions for the proper use and maintenance of your JIARUIXIN CST-1A 2.4G Bluetooth Remote Control, designed for children's electric ride-on cars equipped with CSR-12T series receivers. Please read this manual thoroughly before operation to ensure safe and correct usage.

Image: The CST-1A remote control shown alongside examples of compatible children's electric ride-on cars.

حفاظتی معلومات

• صرف بیرونی استعمال کے لیے۔
• ننگے شعلے یا گرمی کے براہ راست ذرائع سے دور رہیں۔
• All batteries must be inserted with correct polarity.
• To avoid injury, keep batteries away from children.
• Dispose of dead batteries properly and keep them away from children.
• Avoid direct contact between positive and negative terminals to prevent fire or explosion.
• پرانی اور نئی بیٹریوں کو مکس نہ کریں۔ الکلائن، معیاری (کاربن زنک) یا ریچارج ایبل (نکل-کیڈیمیم) بیٹریاں نہ ملا دیں۔
• Only an adult who has read and understood the safety warnings can recharge the battery (if applicable to the car's battery, not the remote's AAA batteries).

Image: Important safety warnings regarding battery usage and handling.

مطابقت

The CST-1A remote control is specifically designed for children's electric ride-on cars that utilize a CSR-12T series receiver. To ensure compatibility, please follow these steps:

1. Open the control box of your electric ride-on car.
2. Check the model number on the receiver. It must start with CSR-12T (e.g., CSR-12T-1A, CSR-12T-1B, CSR-12T-2A, CSR-12T-2B, CSR-12T-3A, CSR-12T-3B).
3. The appearance of the control box should match the compatible models shown in the images below.

اہم نوٹ: The CST-1A remote control is مطابقت نہیں رکھتا with JR white remotes or receivers, nor with older CSG4A receiver versions. Products from different manufacturers are generally not interchangeable.

Image: The CST-1A remote control is compatible with controllers starting with CSR-12T, such as CSR-12T-1A, CSR-12T-1B, and CSR-12T-2A.

Image: Visual distinction between the compatible CST-1A remote (top) and an incompatible JR remote (bottom).

Image: The CST-1A remote control is not compatible with JR receivers or the older CSG4A receiver model.

سیٹ اپ کی ہدایات

1. بیٹری کی تنصیب

The remote control requires two AAA 1.5V batteries (not included). Ensure correct polarity during installation.

1. Locate the battery cover on the back of the remote control.
2. Loosen the screw on the battery cover and remove it.
3. Insert two AAA 1.5V batteries, paying close attention to the positive (+) and negative (-) polarity markings inside the battery compartment.
4. بیٹری کا احاطہ تبدیل کریں اور سکرو سخت کریں۔
5. The indicator lights on the remote will flash three times, confirming correct battery installation.

Image: Instructions for battery installation, showing the battery compartment and screw.

2. Frequency Matching (Pairing)

The remote control needs to be paired with the car's receiver for the first use or after replacing the batteries. Follow these steps:

1. Ensure the car's power switch is OFF.
2. Install two AAA 1.5V batteries into the remote control (as described above). The indicator will flash three times.
3. Press and hold the frequency key (often labeled "car select" or similar, or the 'S' button for speed selection) on the remote control for approximately 2 seconds. The indicator lights on the remote will begin to flash.
4. While the remote's indicator lights are flashing, turn ON the power supply of the electric ride-on car.
5. The indicator lights on the remote control should turn OFF, indicating successful pairing.
6. If the matching is unsuccessful (indicator lights do not turn off), turn off the car's power supply and repeat steps 3 and 4.

Once successfully matched, there is no need to repeat this process unless the batteries are replaced or the connection is lost.

Image: The back of the remote control with printed instructions for frequency matching.

آپریٹنگ ہدایات

Familiarize yourself with the buttons on your CST-1A remote control:

Image: Layout of the CST-1A remote control buttons and their functions.

• آگے: Press the top button of the directional pad to move the car forward.
• Back (Reverse): Press the bottom button of the directional pad to move the car backward.
• بائیں مڑو: Press the left button of the directional pad to turn the car left.
• دائیں مڑیں: Press the right button of the directional pad to turn the car right.
• Emergency Braking (P): Press the 'P' button to stop the car immediately.
• Speed Selection (S): Press the 'S' button to cycle through available speed settings (e.g., low, medium, high).

The remote control will enter a sleep mode if not used for a long time. Press any button to wake up the remote control, and it can be used normally.

دیکھ بھال

• Keep the remote control clean and dry. Avoid exposure to moisture or extreme temperatures.
• ریموٹ کو نرم، خشک کپڑے سے صاف کریں۔ سخت کیمیکل یا کھرچنے والے کلینر کا استعمال نہ کریں۔
• اگر ریموٹ کنٹرول طویل مدت تک استعمال نہیں کیا جائے گا، تو بیٹریوں کو ہٹا دیں تاکہ رساو اور نقصان کو روکا جا سکے۔
• Regularly check the car's battery and ensure it is in good working condition, as a low car battery can affect remote control performance.

خرابی کا سراغ لگانا

وضاحتیں

• ماڈل نمبر: CST-1A
• Compatible Receiver Models: CSR-12T-1A, CSR-12T-1B, CSR-12T-2A, CSR-12T-2B, CSR-12T-3A, CSR-12T-3B
• کنیکٹوٹی: 2.4G بلوٹوتھ
• طاقت کا منبع: 2 x AAA 1.5V بیٹریاں (شامل نہیں)
• مصنوعات کے طول و عرض: 4.7 x 3 x 1.5 انچ
• آئٹم کا وزن: 2.39 اونس
• خصوصی خصوصیت: ایرگونومک ڈیزائن
• تعاون یافتہ آلات کی زیادہ سے زیادہ تعداد: 1
• برانڈ: JIARUIXIN
• Manufacturer (of compatible receiver series): CSR-12T

وارنٹی اور سپورٹ

Specific warranty information for the JIARUIXIN CST-1A remote control is not provided in the product details. For any support inquiries or warranty claims, please contact the seller directly through your purchase platform.

Ensure to check your car's original manual for details regarding its receiver and compatibility with replacement parts.