AXLAHA ہیڈلائٹ اسمبلی انسٹرکشن دستی

1. پروڈکٹ ختمview

This manual provides instructions for the AXLAHA Headlight Assembly, designed as a direct replacement for 2012, 2013, 2014, and 2015 Toyota Tacoma models. This assembly features a chrome housing with an amber reflector and is compatible with Halogen Headlight Models Only. Bulbs are not included.

The headlights are constructed from high-quality materials, ensuring durability and performance. They are quality tested to meet IP70 waterproof standards, providing reliable operation in various environmental conditions. Special fine chrome plating and reflectors enhance light reflectivity for improved night driving safety. An integrated adjuster allows for beam adjustment as needed.

2. گاڑی کی مطابقت

This headlight assembly is compatible with the following vehicle specifications:

• گاڑی کی سروس کی قسم: 2012, 2013, 2014, 2015 Toyota Tacoma
• OEM حصہ نمبر: 8111004181، 8115004181
• فٹمنٹ: Halogen Headlight Models Only

To ensure proper fitment, verify your vehicle's model year and existing headlight type. For Toyota vehicles, VINs starting with "1", "4", or "5" indicate vehicles assembled in the US. VINs beginning with "2" indicate vehicles assembled in Canada, and VINs that start with "J" were produced in Japan. This product is designed for North American/Canadian built models and does not fit Japan-built models.

Image: Guide for checking vehicle specifications to ensure proper headlight fitment.

Image: Diagram explaining how to decode a Toyota VIN to determine the vehicle's manufacturing origin.

3. پروڈکٹ کے اجزاء اور خصوصیات

The headlight assembly includes a clear lens, amber reflector, and housing designed for optimal light output and durability. Key features include:

• صاف لینس: Provides maximum light transmission.
• Amber Reflector: Enhances visibility and safety.
• High/Low Beam: Utilizes H4 bulbs (not included).
• ٹرن سگنل لائٹ: Uses 4157A bulbs (included).
• ایڈجسٹ کرنے والا: For precise beam alignment.
• One-way Vent: Prevents moisture buildup.
• Bulb Protective Film: Added protection for the bulb.

تصویر: تفصیلی view of the front of the headlight assembly, highlighting the clear lens, parking light, turn signal light, high/low beam, and safety reflector.

تصویر: تفصیلی view of the rear of the headlight assembly, showing the adjuster, one-way vent, and bulb protective film.

4. سیٹ اپ اور انسٹالیشن

The AXLAHA Headlight Assembly is designed for a plug-and-play installation, requiring no complicated techniques or drilling. It comes as a pair, including both driver and passenger side assemblies.

تنصیب کے مراحل:

1. Ensure the vehicle is turned off and the battery is disconnected for safety.
2. Remove the old headlight assembly by unscrewing any mounting bolts and disconnecting electrical connectors.
3. Connect the electrical connectors from the new AXLAHA headlight assembly to the vehicle's wiring harness.
4. Secure the new headlight assembly in place using the original mounting points and hardware.
5. گاڑی کی بیٹری کو دوبارہ جوڑیں۔
6. Test all lighting functions (high beam, low beam, turn signal, parking light) to ensure proper operation.
7. Adjust the headlight beam as necessary (refer to the Operating section).

Image: A person wearing gloves carefully installing a headlight assembly into a vehicle.

انسٹالیشن ویڈیو وسائل:

5. Operating the Headlights

Once installed, operate your headlights using your vehicle's standard controls. The high/low beam function is controlled by your vehicle's stalk switch. The turn signals and parking lights operate as per your vehicle's original design.

Headlight Beam Adjustment:

The headlight assembly includes an adjuster to fine-tune the beam direction. Proper adjustment ensures optimal visibility without blinding oncoming traffic. Locate the adjuster screw on the back of the headlight housing (refer to 'Back Details' image in Section 3). Use a screwdriver to turn the adjuster to raise or lower the beam as required. It is recommended to perform this adjustment on a level surface, facing a wall, following local regulations for headlight aiming.

Image: Close-up of the headlight adjuster screw, indicating vertical adjustment capability.

Image: Comparison of road visibility at night with properly functioning headlights versus poor lighting.

6 دیکھ بھال

To ensure the longevity and optimal performance of your AXLAHA Headlight Assembly, regular maintenance is recommended.

• صفائی: Regularly clean the outer lens with a soft cloth and mild soap solution to remove dirt and debris. Avoid abrasive cleaners that can damage the UV coating.
• معائنہ: Periodically inspect the headlight assembly for any signs of damage, cracks, or moisture intrusion. The IP70 waterproof rating helps prevent water accumulation, but extreme conditions or physical damage can compromise this.
• بلب کی تبدیلی: If a bulb burns out, replace it promptly with the correct type (H4 for high/low beam, 4157A for turn signal). Ensure the vehicle is off and cool before handling bulbs.

Image: Illustration demonstrating the waterproof capabilities of the headlight assembly against rain, snow, and dust.

Image: Visual explanation of the UV coating's role in preventing yellowing and cracking of the headlight lens.

7 خرابیوں کا سراغ لگانا

If you encounter issues with your headlight assembly, consider the following common troubleshooting steps:

• ہیڈلائٹ کام نہیں کر رہی: Check the bulb for damage or burnout. Verify electrical connections are secure. Inspect the vehicle's fuse box for a blown headlight fuse.
• مدھم روشنی: صحیح واٹ کو یقینی بنائیںtage bulbs are installed. Check for any haze or dirt on the lens that might be obstructing light output.
• Condensation Inside Lens: Small amounts of condensation can occur due to temperature changes and typically dissipate. If excessive or persistent, ensure the one-way vent is clear and not blocked. Check for cracks in the housing or seal.
• Improper Beam Pattern: Use the integrated adjuster to correct the beam alignment. If the issue persists, ensure the headlight assembly is securely mounted.

For persistent issues or complex problems, it is recommended to consult a professional automotive technician.

8. وضاحتیں

9. وارنٹی اور سپورٹ

AXLAHA products come with a 2-year warranty, ensuring peace of mind regarding product quality and performance. Our dedicated after-sales service team is available to assist with any issues or questions you may have after purchasinجی ہماری مصنوعات۔

سپورٹ سے رابطہ کریں:

For any inquiries or support needs, please contact us via email:

• کسٹمر سروس ای میل: info@axlaha.com / service@axlaha.com

Image: Graphic detailing AXLAHA's commitment to lifetime service and a 1-year warranty.