MAONO BA20 Boom Arm Microphone Stand Instruction Manual

تعارف

The MAONO BA20 Boom Arm Microphone Stand is designed for precise microphone placement and stable performance. Constructed from sturdy steel, it offers wide range of motion and compatibility with various microphones, making it suitable for podcasting, gaming, streaming, and recording.

پیکیج کے مشمولات

• Microphone Scissor Arm Stand x1
• ٹیبل ماؤنٹنگ کلamp x1
• 3/8" to 5/8" Screw Adapter x1
• Standard Microphone Clip x1
• Cable Straps x2

Image: All components included in the MAONO BA20 package.

سیٹ اپ اور انسٹالیشن

1. Attach the Table Mounting Clamp: Secure the table mounting clamp to a sturdy desk surface. The clamp is designed to fit desk thicknesses up to 2.2 inches (5.5 cm) and includes a rubber pad to protect the desk from scratches. Ensure the clamp is tightened firmly for stability. Note: It may not be suitable for glass tables.

   Image: The upgraded C-frame desk clamp with a soft pad for desk protection.
2. بوم بازو داخل کریں: Insert the base of the microphone scissor arm stand into the hole on the table mounting clamp. The arm should rotate freely.
3. مائیکروفون منسلک کریں: Screw your microphone onto the 3/8" to 5/8" screw adapter (if needed) and then attach it to the boom arm. The boom arm supports microphones weighing up to 2.2 lb (1 kg).

   Image: Compatibility list for various microphones using the included adapter and clip.

4. کیبل مینجمنٹ: Use the included cable straps to secure your microphone cable along the boom arm for a tidy setup.

آپریشن اور ایڈجسٹمنٹ

The MAONO BA20 boom arm offers extensive adjustability for optimal microphone positioning.

• Angle and Height Adjustment: Easily adjust the angle and height of the boom arm by loosening the knob at the joints. This allows for silent and effortless positioning of your microphone.

  Image: The boom arm offers 180-degree vertical adjustment, 270-degree arm rotation, and 360-degree base rotation.

• 360 ڈگری گردش: The base of the arm allows for full 360-degree rotation, providing maximum flexibility to position your microphone anywhere around your desk.
• موسم بہار کا طریقہ کار: The sturdy steel construction and spring design ensure stable and reliable performance, holding microphones up to 2.2 lbs (1 kg) securely in place.

  Image: Detail of the internal springs and robust square tubing for silent and effortless positioning.

مطابقت

The MAONO BA20 is designed for broad compatibility with many popular microphones.

• Screw Adapter: Includes a 5/8" to 3/8" screw adapter for compatibility with various microphone threads.
• Standard Microphone Clip: A standard microphone clip is included, suitable for microphones with a diameter of up to 1 inch (26 mm).
• Tested Compatibility: Compatible with MAONO PD100X, PD200X, DGM20, DM40, Fifine AM8, AmpliGame (A6V, A8), HyperX QuadCast, HyperX Solocast, Shure MV7, Shure SM58, and many other microphones.

وضاحتیں

آفیشل پروڈکٹ ویڈیو

خرابی کا سراغ لگانا

• Arm not holding position: Ensure all adjustment knobs are tightened securely. Verify that your microphone's weight does not exceed the maximum load capacity of 2.2 lbs (1 kg).
• ڈیسک کل۔amp slipping: Make sure the desk clamp is fully tightened and the rubber pad is correctly positioned to prevent slippage. Avoid using on glass tables if stability is an issue.
• Microphone not fitting: Use the provided 3/8" to 5/8" screw adapter if your microphone has a different thread size. Ensure your microphone's diameter is compatible with the standard clip (max 1 inch/26 mm).

وارنٹی اور سپورٹ

For any questions or issues after receiving this product, please contact MAONO customer support as soon as possible. Refer to the official MAONO website for detailed warranty information and support resources.

Visit the official MAONO Store: MAONO اسٹور