Dlyfull B4 Universal Battery Tester

تعارف

The Dlyfull B4 Universal Battery Tester is designed to accurately measure the voltage and remaining capacity of a wide range of battery types. This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your battery tester, ensuring optimal performance and longevity.

Image: The Dlyfull B4 Universal Battery Tester, showing its LCD display and various testing slots.

باکس میں کیا ہے۔

• 1 x Dlyfull B4 Battery Load Tester
• 2 x AAA الکلین 1.5V بیٹریاں
• 1 ایکس ویلکم گائیڈ

مصنوعات کی خصوصیات

• مضبوط مطابقت: Compatible with 12 battery types, including 1.2V Ni-MH, 1.45V Zinc Air, 1.5V Alkaline, 3.0V Lithium Manganese, 3.2V LiFePO4, 3.7V Li-ion, 6.0V, 9.0V, and 12.0V Alkaline packs. Supports AAA, AA, C, SC, D, N sizes, button cells, CR123A, CR-V3, 2CR5, 23A, 27A, and more.
• اسمارٹ LCD ڈسپلے: Features an LCD screen that displays battery voltage and level in both percentage and a battery bar, providing clear and precise information.
• پورٹیبل اور استعمال میں آسان: Compact design weighing less than 0.36 pounds, making it convenient for carrying and storage. Cylindrical batteries are tested using the black negative pin, while button and combination batteries are placed in their corresponding slots.
• خود ٹیسٹ فنکشن: A "CHECK" button allows for a self-test of the tester's internal battery level by holding it for 3 seconds.

Image: The Dlyfull B4 Battery Tester demonstrating its powerful compatibility with over 12 different battery types, including various cylindrical and button cell batteries.

تصویر: ایک تفصیلی view of the Dlyfull B4's smart LCD display, illustrating how battery remaining power, percentagای ، اور جلدtage are clearly shown.

سیٹ اپ

1. AAA بیٹریاں انسٹال کریں: Open the battery compartment on the back of the Dlyfull B4 tester. Insert the two included 1.5V AAA alkaline batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. Initial Self-Test: Press and hold the "CHECK" button located on the front of the tester for approximately 3 seconds. The LCD display will show the tester's own battery level. If "Err" appears, ensure the AAA batteries are correctly installed and have sufficient charge.

Image: The back of the Dlyfull B4 Battery Tester, illustrating the compartment for the two AAA power supply batteries.

آپریٹنگ ہدایات

The Dlyfull B4 Battery Tester is designed for straightforward operation. Follow these steps to test your batteries:

1. بیٹری کی قسم کی شناخت کریں: Locate the appropriate testing slot or contact point on the tester for your specific battery type (e.g., 1.5V Alkaline, 3.7V Li-ion, 9V, etc.). The tester has clearly labeled sections for different battery chemistries and sizes.
2. بیٹری کو جوڑیں:
   • Cylindrical Batteries (AA, AAA, C, D, 18650, etc.): Place the positive (+) end of the battery into the designated slot. Use the black negative pin (attached via a coiled cord) to touch the negative (-) end of the battery. Ensure a firm contact.
   • Button Cells (CR2032, AG series, etc.): Place the button cell directly into its corresponding slot, observing the polarity markings.
   • Multilayer Batteries (9V, 6V, 12V): Insert the battery into the dedicated slot, aligning with the polarity indicators.
   

   Image: The Dlyfull B4 Battery Tester showing clear polarity guidance indicators to ensure correct and safe battery insertion during testing.
3. ڈسپلے پڑھیں: Once the battery is correctly connected, the LCD display will automatically show the battery's voltage and remaining charge as a percentage and a battery level bar.
4. بیٹری ہٹائیں: Carefully remove the battery from the tester after reading the results.

Image: A collage of images demonstrating the testing process for various battery types, including 1.5V Alkaline, 9V, 3V Li CR-types, and CR2/CR123A batteries, using the Dlyfull B4 Battery Tester.

دیکھ بھال

• صفائی: Wipe the tester with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• ذخیرہ: Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the AAA batteries from the tester to prevent leakage.
• Tester Battery Replacement: If the self-test function indicates low battery for the tester itself, replace the two AAA alkaline batteries promptly to ensure accurate readings.

خرابی کا سراغ لگانا

وضاحتیں

وارنٹی اور سپورٹ

The Dlyfull B4 Universal Battery Tester comes with a 12 ماہ کی وارنٹی from the date of purchase. DLYFULL also provides Lifetime 24-Hour Friendly Customer Service.

For support, warranty claims, or further inquiries, please refer to the contact information provided in your Welcome Guide or visit the official DLYFULL store:

Visit the DLYFULL Store on Amazon