Maxax 4 Lights Crystal Chandelier User Manual

1. تعارف

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Maxax 4 Lights Crystal Chandelier. Please read this manual thoroughly before beginning installation and retain it for future reference. This chandelier features a black metal frame with K9 crystals, designed for flush mount ceiling installation.

تصویر 1.1: مجموعی طور پر view of the Maxax 4 Lights Crystal Chandelier.

2. حفاظتی معلومات

• انتباہ: Always turn off the electrical supply at the main circuit breaker or fuse box before beginning installation or performing any maintenance. Failure to do so may result in electrical shock, serious injury, or death.
• تمام برقی کنکشن مقامی کوڈز، آرڈیننسز یا نیشنل الیکٹرک کوڈ (NEC) کے مطابق ہونے چاہئیں۔ اگر آپ برقی وائرنگ کے مناسب کنکشن سے ناواقف ہیں تو کسی مستند الیکٹریشن سے مشورہ کریں۔
• زیادہ سے زیادہ واٹ سے تجاوز نہ کریں۔tagای بلبوں کے لیے مخصوص ہے۔
• Handle crystals with care to prevent breakage or injury.
• یقینی بنائیں کہ بڑھتی ہوئی سطح فکسچر کے وزن کو سہارا دے سکتی ہے۔
• This fixture is designed for indoor use only and is not water-resistant.

3. پیکیج کے مشمولات

Verify that all components are present before discarding packaging materials.

• Chandelier Fixture Body
• K9 Crystal Elements (various shapes and sizes)
• Mounting Hardware (Crossbar, Mounting Screws, Wire Nuts, Ground Screw)
• ہدایت نامہ

4. وضاحتیں

Image 4.1: Chandelier dimensions (15" diameter, 7.3" height).

5. سیٹ اپ اور انسٹالیشن

5.1. تیاری

1. Turn off power at the main circuit breaker or fuse box.
2. احتیاط سے تمام اجزاء کو کھولیں اور کسی بھی نقصان کا معائنہ کریں۔
3. Gather necessary tools: screwdriver, wire strippers, electrical tape, ladder, safety glasses.

5.2. فکسچر کو چڑھانا

1. Attach the mounting crossbar to the junction box in the ceiling using the provided mounting screws. Ensure it is securely fastened.
2. Thread the fixture wires through the center hole of the crossbar.

5.3. وائرنگ کنکشن

1. Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green) using a wire nut. Secure the ground wire to the mounting crossbar with the green ground screw.
2. وائر نٹ کا استعمال کرتے ہوئے جنکشن باکس سے سفید تار کو فکسچر سے سفید (غیر جانبدار) تار سے جوڑیں۔
3. تار نٹ کا استعمال کرتے ہوئے جنکشن باکس سے سیاہ تار کو فکسچر سے سیاہ (گرم) تار سے جوڑیں۔
4. Ensure all wire nuts are tightly secured and wrap connections with electrical tape for added safety.
5. احتیاط سے تمام تاروں کو جنکشن باکس میں لگائیں۔

5.4. Securing the Fixture

1. Align the fixture body with the mounting screws on the crossbar.
2. Secure the fixture to the ceiling by tightening the decorative nuts or screws provided.

5.5. Attaching Crystals

The K9 crystals are individually attached to the fixture. Refer to the diagram below for general placement, or follow the specific pattern if provided with your packaging.

1. Carefully remove each crystal element from its protective packaging.
2. Locate the small hooks on each crystal and the corresponding loops or holes on the chandelier frame.
3. Attach each crystal by gently hooking it onto the designated loop. Work from the inside out or top down for easier assembly.

تصویر 5.1: کلوز اپ view illustrating crystal attachment points and bulb sockets.

تصویر 5.2: تفصیلی view of individual crystal elements and their arrangement.

5.6. Installing Bulbs

1. Insert four E12 base bulbs (not included) into the sockets. Do not exceed 60W per bulb.
2. مین سرکٹ بریکر پر پاور آن کریں۔

تصویر 5.3: مثال کے طور پرamples of compatible E12 base bulbs (bulbs not included).

6. آپریٹنگ ہدایات

Once installed, the chandelier operates like any standard ceiling light fixture.

• آن/آف کرنا: Use the wall switch connected to the fixture to turn the chandelier on or off.
• Dimming تقریب: If a compatible dimmer switch is installed (not included), you can adjust the light intensity by operating the dimmer switch. Ensure that the bulbs used are also dimmable.

7 دیکھ بھال

7.1. صفائی

• Fixture Body: Wipe the metal parts with a soft, dry cloth. Do not use abrasive cleaners or polishes as they may damage the finish.
• کرسٹل: Gently wipe crystals with a soft, damp cloth. For a deeper clean, a mild glass cleaner can be sprayed onto a cloth (not directly onto the crystals or fixture) and then used to wipe the crystals. Ensure no liquid enters the electrical components.

7.2. بلب کی تبدیلی

• انتباہ: Always turn off power at the main circuit breaker before replacing bulbs.
• بلب کو چھونے سے پہلے انہیں مکمل طور پر ٹھنڈا ہونے دیں۔
• Unscrew the old bulb and replace it with a new E12 base bulb, not exceeding 60W.

8 خرابیوں کا سراغ لگانا

9. وارنٹی اور کسٹمر سپورٹ

For any questions, concerns, or issues regarding your Maxax chandelier, please contact 4MODERNHOME customer service. While specific warranty details are not provided in this manual, 4MODERNHOME is committed to providing satisfactory solutions for their products.

رابطہ کی معلومات: Please refer to the contact details provided with your purchase or visit the official 4MODERNHOME webسپورٹ کے لیے سائٹ۔