1. تعارف
Thank you for choosing the MAXSafes Model 10002V Drop Down Biometric Handgun Safe. This safe is designed to provide secure storage and quick access to your firearm using advanced finger vein recognition, a digital keypad, or a mechanical key. Please read this manual thoroughly before installation and operation to ensure proper use and maximum security.
Figure 1: MAXSafes Model 10002V Drop Down Biometric Handgun Safe
2. حفاظتی معلومات
انتباہ: Always store firearms unloaded and separate from ammunition. Keep the safe locked and out of reach of children and unauthorized individuals. Never store the mechanical override keys inside the safe. Familiarize yourself with all local and federal laws regarding firearm storage.
- اس بات کو یقینی بنائیں کہ غیر مجاز ہٹانے سے بچنے کے لیے سیف کو محفوظ طریقے سے نصب کیا گیا ہے۔
- Do not leave the safe open or unattended.
- Test all access methods periodically to ensure proper function.
- کم بیٹری اشارے ظاہر ہونے پر بیٹریاں فوری طور پر تبدیل کریں۔
3. پیکیج کے مشمولات
تصدیق کریں کہ تمام اشیاء پیکیج میں موجود ہیں:
- MAXSafes Model 10002V Handgun Safe
- Mechanical Override Keys (2)
- بڑھتے ہوئے ہارڈ ویئر (پیچ، اینکرز)
- ہدایات دستی (یہ دستاویز)
4. پروڈکٹ ختمview
The MAXSafes 10002V features a robust design with multiple access options for enhanced security and convenience.
Figure 2: Key Features of the MAXSafes 10002V
اجزاء:
- انگلی کی رگ سکینر: For advanced biometric access.
- ڈیجیٹل کی پیڈ: For 4-6 digit combination code entry.
- کی ہول: For mechanical override key access.
- بیٹری ٹوکری: Located on the underside or rear of the unit.
- اندرونی ایل ای ڈی لائٹ: Illuminates the safe's interior upon opening.
- بڑھتے ہوئے پوائنٹس: For securing the safe to a wall or desk.
Figure 3: Access Methods - Vein Recognition, Digital Keypad, Mechanical Key
5. سیٹ اپ
5.1 بیٹری کی تنصیب
- Locate the battery compartment, typically on the underside or rear of the safe.
- ٹوکری کا احاطہ کھولیں۔
- 4 AA بیٹریاں داخل کریں (شامل نہیں)، درست قطبیت کو یقینی بناتے ہوئے (+/-)۔
- بیٹری کے کمپارٹمنٹ کور کو محفوظ طریقے سے بند کریں۔
- The safe will emit a beep, indicating successful power-up.
5.2 Initial Access and Programming
Upon first use, access the safe using the mechanical override key.
- Insert the mechanical key into the keyhole and turn it to unlock the safe.
- محفوظ دروازہ کھولو۔
5.2.1 Setting a Digital Combination Code
- With the safe door open, locate the internal programming button (usually a small red or green button).
- Press the programming button. The indicator light on the keypad will illuminate.
- کی پیڈ پر اپنا مطلوبہ 4-6 ہندسوں کا کوڈ درج کریں۔
- Press the programming button again to confirm. The safe will beep to confirm the new code.
- نئے کوڈ کو بند کرنے سے پہلے دروازہ کھول کر اس کی جانچ کریں۔
5.2.2 Registering Finger Vein IDs
The safe can store up to 50 finger vein IDs.
- With the safe door open, press the programming button. The indicator light will illuminate.
- Place your finger firmly on the vein scanner. The scanner will light up and beep.
- Lift and reposition your finger slightly, then place it on the scanner again. Repeat this process 3-5 times from different angles to ensure a comprehensive scan.
- A successful registration will be indicated by a series of beeps.
- Repeat for additional fingers or users (up to 50).
- Test registered finger veins with the door open before closing it.
Figure 4: Finger Vein Recognition Technology
5.3 سیف کو لگانا
The safe can be mounted to a wall or desk. Choose a secure location that is out of sight and reach of unauthorized persons.
- Select a suitable mounting location (e.g., under a desk, inside a cabinet, on a wall stud).
- Position the safe in the desired location and mark the mounting points through the pre-drilled holes on the safe's back or bottom.
- Drill pilot holes into the mounting surface using an appropriate drill bit size for the provided hardware.
- Align the safe with the drilled holes and secure it using the provided screws and anchors. Ensure the safe is firmly attached and does not wobble.
شکل 5: سابقamples of Wall and Desk Mounting Options
6. آپریٹنگ ہدایات
6.1 انگلی کی رگ کی شناخت کے ساتھ کھلنا
- Place a registered finger firmly on the vein scanner.
- The scanner will light up, and the safe will emit a confirmation beep if the vein pattern is recognized.
- The safe door will automatically drop down, providing quick access.
6.2 ڈیجیٹل کی پیڈ کے ساتھ کھلنا
- Enter your programmed 4-6 digit combination code on the keypad.
- The safe will emit a confirmation beep if the code is correct.
- The safe door will automatically drop down.
6.3 Opening with Mechanical Key
Use the mechanical key as a backup in case of battery failure or forgotten codes.
- Locate the keyhole cover (if present) and remove it.
- Insert the mechanical key into the keyhole and turn it to unlock the safe.
- The safe door will open.
6.4 خاموش موڈ
The safe features a silent mode for discreet access. Refer to the safe's specific button layout for activating/deactivating silent mode (often a dedicated button or a combination press).
6.5 الارم وضع
The safe is equipped with an audible alarm. This alarm may activate if multiple incorrect access attempts are made or if the safe is tampered with. Consult the safe's interface for specific alarm settings or deactivation procedures.
6.6 اندرونی ایل ای ڈی لائٹ
The interior LED light automatically illuminates when the safe door opens, providing visibility in low-light conditions.
7 دیکھ بھال
7.1 بیٹری کی تبدیلی
When the low battery indicator (usually a flashing light or specific beep pattern) appears, replace all 4 AA batteries promptly. Use high-quality alkaline batteries for optimal performance.
7.2 صفائی
سیف کے بیرونی حصے کو نرم سے صاف کریں، ڈیamp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components. Keep the finger vein scanner clean and free of debris.
7.3 Regular Function Check
Periodically test all access methods (finger vein, keypad, mechanical key) to ensure they are functioning correctly. This helps identify potential issues before they become critical.
8 خرابیوں کا سراغ لگانا
If you encounter issues with your MAXSafes 10002V, refer to the following common problems and solutions:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Finger vein not recognized | Improper finger placement, unregistered finger, dirty scanner, skin conditions (e.g., very dry, damaged). | Ensure firm and consistent finger placement. Re-register the finger, trying different angles. Clean the scanner. Try another registered finger or access method. |
| کی پیڈ جواب نہیں دے رہا ہے۔ | کم بیٹریاں، غلط کوڈ، کی پیڈ کی خرابی۔ | Replace batteries. Re-enter code carefully. Use mechanical key if necessary. |
| محفوظ نہیں کھلنا | Low batteries, incorrect access, mechanical obstruction. | Replace batteries. Try all access methods. Check for any obstructions preventing the door from dropping. |
| کم بیٹری اشارے | بیٹریاں کم ہیں۔ | تمام 4 AA بیٹریاں فوری طور پر تبدیل کریں۔ |
9. وضاحتیں
Detailed specifications for the MAXSafes Model 10002V:
- برانڈ: MAXSafes
- ماڈل نمبر: 10002V
- مصنوعات کے طول و عرض: 11.1"D x 3.8"W x 13.8"H
- آئٹم کا وزن: 9.55 پاؤنڈ
- تالا کی قسم: Biometric (Finger Vein), Electronic Combination Lock, Key
- رنگ: سیاہ
- صلاحیت: 8.7 پاؤنڈز
- مواد: Carbon Steel (16 gauge)
- خصوصی خصوصیت: Sensor Light, Audible Alarm
- چڑھنے کی قسم: Wall Mount, Desk Mount
- UPC: 762736839353
Figure 6: Product Dimensions and Included Keys
10. وارنٹی اور سپورٹ
MAXSafes products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MAXSafes webسائٹ کسی بھی وارنٹی دعووں کے لیے خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید رکھیں۔
