1. تعارف
The Daytech DA10 Freezer and Refrigerator Door Alarm is designed to alert users when a refrigerator or freezer door has been left open for an extended period. This device helps prevent food spoilage and unnecessary energy consumption by providing timely audible notifications. It features adjustable delay settings, multiple alarm modes, and customizable volume levels to suit various environments and needs.
2. مصنوعات کی خصوصیات
- Delayed Alert: Configurable delay times of 1, 2, 3, or 4 minutes before the alarm activates.
- دوہری بجنے کے طریقے: Choose between CHIME mode for a gentle reminder or ALARM mode for a loud alert.
- سایڈست حجم: Five volume levels, ranging from 0 dB (silent) to 120 dB, allowing customization for different noise environments.
- کم بیٹری وارننگ: The alarm provides a shorter beep duration when batteries are low, indicating it's time for replacement.
- خودکار شٹ آف: If the door remains open, the alarm will stop after 30 minutes of continuous activation to conserve battery life.
- ورسٹائل ایپلی کیشن: Suitable for refrigerators, freezers, garage doors, shed doors, windows, cabinets, and other entry points.
شکل 1: ختمview of Daytech Freezer Door Alarm features.
3. پیکیج کے مشمولات
تمام اشیاء کی موجودگی کو یقینی بنانے کے لیے براہ کرم پیکیج چیک کریں:
- Main Alarm Unit (1x)
- Magnetic Strip (1x)
- AAA بیٹریاں (2x)
- Double-sided Adhesive Tape (2x sets)
- بڑھتے ہوئے پیچ (2x)
- یوزر مینوئل (1x)
ویڈیو 1: ان باکسنگ اور اس سے زیادہview of the Daytech Freezer Door Alarm contents.
4. سیٹ اپ اور انسٹالیشن
4.1 بیٹری کی تنصیب
- مرکزی الارم یونٹ کے پچھلے حصے میں بیٹری کے کمپارٹمنٹ کور کو کھولیں۔
- درست قطبیت (+/-) کو یقینی بناتے ہوئے دو AAA بیٹریاں داخل کریں۔
- بیٹری کے کمپارٹمنٹ کور کو محفوظ طریقے سے بند کریں۔
4.2 الارم لگانا
The alarm can be mounted using either the provided adhesive tape or screws.
- Clean the surface where the alarm will be installed to ensure it is dry and free of dust or grease.
- Attach the double-sided adhesive tape to the back of both the main alarm unit and the magnetic strip. Alternatively, use the provided screws for a more permanent installation.
- Position the main alarm unit on the door frame or the fixed part of the appliance.
- Position the magnetic strip on the moving part of the door, ensuring that the triangle marks on both the main unit and the magnetic strip are aligned.
- مین یونٹ اور مقناطیسی پٹی کے درمیان فاصلہ ہونا ضروری ہے۔ 0.98 انچ (2.5 سینٹی میٹر) سے کم یا اس کے برابر جب دروازہ بند ہو جاتا ہے۔
Figure 2: Step-by-step installation guide for the alarm.
Figure 3: Installation and battery replacement visuals.
5. آپریٹنگ ہدایات
5.1 پاور آن/آف اور موڈ کا انتخاب
Use the 'CHIME/ALARM/OFF' switch on the side of the main unit to select the desired mode:
- گھنٹی: The alarm will emit a chime sound when triggered.
- الارم: The alarm will emit a loud siren sound when triggered.
- بند: الارم بند ہے۔
5.2 Setting Delay Time (1-4 Minutes)
Press the 'SET' key on the side of the main unit to cycle through the four delay modes. Each press will confirm the mode with a specific number of beeps:
- Mode 1 (1 beep): Alert after 1 minute, beeps every 15 seconds for 5 seconds until the door closes. (Recommended for refrigerators, basement doors).
- Mode 2 (2 beeps): Alert after 2 minutes, beeps every 10 seconds for 10 seconds until the door closes. (Recommended for garages, shed doors).
- Mode 3 (3 beeps): Alert after 3 minutes, beeps every 5 seconds for 15 seconds until the door closes. (Recommended for windows, cabinet doors).
- Mode 4 (4 beeps): Alert after 4 minutes, beeps every 20 seconds for 15 seconds until the door closes. (Recommended for offices, shop doors).
Figure 4: Four selectable delay modes and their alert patterns.
Video 2: Demonstration of setting the delay modes on the Daytech Freezer Door Alarm.
5.3 والیوم کو ایڈجسٹ کرنا
Use the volume buttons (+/-) on the side of the main unit to adjust the alarm's loudness. There are 5 levels available, from 0 dB (silent) to 120 dB (maximum loudness).
Video 3: Guide to adjusting the volume levels of the Daytech Freezer Door Alarm.
6 دیکھ بھال
6.1 صفائی
Wipe the alarm unit and magnetic strip with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
6.2 بیٹری کی تبدیلی
When the low battery warning is activated (shorter beeps), replace the two AAA batteries promptly to ensure continuous operation. Follow the battery installation steps in Section 4.1.
7 خرابیوں کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| الارم نہیں بجتا ہے۔ | 1. Batteries are dead or incorrectly installed. 2. Alarm is in 'OFF' mode. 3. Magnetic strip is too far from the main unit. | 1. Replace batteries and check polarity. 2. Switch to 'CHIME' or 'ALARM' mode. 3. Adjust placement to ensure distance is ≤ 0.98 inches (2.5 cm). |
| Alarm sounds too frequently. | Delay time is too short. | Increase the delay time using the 'SET' key (Mode 2, 3, or 4). |
| Alarm is too quiet/loud. | Volume level is not set correctly. | Adjust the volume using the +/- buttons. |
| Low battery warning persists after replacement. | Incorrect battery type or faulty batteries. | Ensure new, alkaline AAA batteries are used. Try a different set of batteries. |
8. وضاحتیں
- ماڈل: ڈی اے 10
- طول و عرض: 2.52 x 1.34 x 4.57 انچ
- آئٹم کا وزن: 3.98 اونس
- طاقت کا منبع: 2 x AAA بیٹریاں (شامل)
- بیٹری سیل کی قسم: الکلین
- کنٹرول کا طریقہ: چھوئے۔
- شور کی سطح: 0-120 ڈیسیبل
- چڑھنے کی قسم: Wall Mount (Adhesive/Screws)
- زیادہ سے زیادہ سینسر کی حد: 0.98 انچ (2.5 سینٹی میٹر)
9. وارنٹی اور سپورٹ
Daytech products are designed for reliability and performance. For specific warranty information, please refer to the product packaging or contact Daytech customer support. If you encounter any issues or have questions regarding your Daytech DA10 Freezer and Refrigerator Door Alarm, please visit the official Daytech webسائٹ یا مدد کے لیے ہماری کسٹمر سروس ٹیم سے رابطہ کریں۔
رابطہ کی معلومات:
Please refer to the official Daytech webتازہ ترین رابطے کی تفصیلات کے لیے سائٹ یا مصنوعات کی پیکیجنگ۔
