1. تعارف
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the TRU COMPONENTS Signal Pillar, model TC-12835336. This device is designed for industrial signaling applications, featuring red and green LED indicators with continuous or flashing light modes and an IP65 protection rating.
2. حفاظتی معلومات
- تنصیب اور آپریشن سے پہلے تمام ہدایات کو احتیاط سے پڑھیں۔
- تنصیب صرف اہل افراد کے ذریعہ کی جانی چاہئے۔
- اس بات کو یقینی بنائیں کہ کسی بھی تنصیب، دیکھ بھال، یا خرابیوں کا سراغ لگانے سے پہلے بجلی کی فراہمی منقطع ہے۔
- صحیح جلد کی تصدیق کریں۔tage (24V) is supplied to prevent damage to the unit.
- Do not expose the device to conditions beyond its specified IP65 rating.
- طویل عرصے تک ایل ای ڈی لائٹ سے براہ راست آنکھ کی نمائش سے گریز کریں۔
3. پروڈکٹ ختمview
The TRU COMPONENTS Signal Pillar TC-12835336 is a robust signaling device with two LED segments (red and green) for clear visual indication in various industrial environments.
تصویر 1: TRU COMPONENTS Signal Pillar TC-12835336. This image displays the signal pillar with its black base, threaded mounting shaft, and two translucent LED segments: red on top and green below. A bundle of multi-colored wires extends from the base for electrical connection.
اجزاء:
- ایل ای ڈی سیگمنٹس: Red and Green, providing visual status.
- ہاؤسنگ: Durable black housing with a diameter of 55 mm.
- بڑھتے ہوئے دھاگے: محفوظ تنصیب کے لیے۔
- وائرنگ کا استعمال: Multi-colored wires for power and control connections.
4. وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | TC 12835336 |
| ہلکے رنگ | سرخ، سبز |
| روشنی کے طریقوں | Continuous or Flashing |
| قطر | Ø 55 ملی میٹر |
| تحفظ کی درجہ بندی | آئی پی 65 |
| والیومtage | 24V |
| کارخانہ دار | TRU اجزاء |
| اصل ملک | چین |
5. سیٹ اپ اور انسٹالیشن
- بجلی کا کنکشن: Ensure all power to the installation area is disconnected before beginning.
- چڑھنا: Securely mount the signal pillar using its threaded base. Ensure the mounting surface is stable and capable of supporting the device.
- وائرنگ: Connect the signal pillar's wires to the appropriate 24V power supply and control system. Refer to the wiring diagram (if provided separately with the product) for specific connections for continuous or flashing modes. Typically, different wires control each LED segment and the flashing function.
- ماحولیاتی مہر: Ensure the IP65 rating is maintained after installation by properly sealing all connections and mounting points, especially in environments where dust or water ingress is a concern.
- پاور کنکشن: Once all connections are secure and verified, restore power to the system.
6. آپریٹنگ ہدایات
The TRU COMPONENTS Signal Pillar operates by receiving a 24V signal to illuminate its LED segments. The specific wiring configuration determines whether a segment illuminates continuously or flashes.
- مسلسل روشنی: Apply 24V to the designated wire for the desired LED segment (e.g., red or green) to achieve continuous illumination.
- Flashing Lighting: If wired for flashing operation, applying 24V to the corresponding wire will activate the flashing mode for that LED segment. Consult your system's wiring diagram for specific control signals.
- Multiple Segments: Both red and green segments can be activated independently or simultaneously, depending on the control system's design.
7 دیکھ بھال
The TRU COMPONENTS Signal Pillar is designed for low maintenance. Regular checks can ensure optimal performance.
- صفائی: Periodically clean the exterior of the signal pillar with a soft, damp کپڑا کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
- معائنہ: Regularly inspect the housing and wiring for any signs of damage, wear, or loose connections.
- مہر کی سالمیت: For IP65 rated protection, ensure all seals and cable glands remain intact and properly tightened.
- بجلی کا کنکشن: کسی بھی دیکھ بھال کو انجام دینے سے پہلے ہمیشہ بجلی منقطع کریں۔
8 خرابیوں کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Signal pillar does not illuminate. | No power supply; incorrect wiring; faulty LED segment. | Check 24V power supply; verify wiring connections against diagram; if power and wiring are correct, the LED segment may require replacement. |
| LED segment illuminates continuously instead of flashing (or vice-versa). | Incorrect wiring for flashing/continuous mode. | Review wiring diagram and ensure correct connections for the desired operating mode. |
| وقفے وقفے سے آپریشن۔ | Loose wiring connection; unstable power supply. | Inspect all wiring connections for tightness; check power supply stability. |
اگر ٹربل شوٹنگ کے اقدامات سے مسئلہ حل نہیں ہوتا ہے، تو کسٹمر سپورٹ یا کسی قابل ٹیکنیشن سے رابطہ کریں۔
9. وارنٹی اور سپورٹ
For information regarding warranty coverage, technical support, or replacement parts, please refer to the documentation provided with your purchase or contact TRU COMPONENTS customer service. Keep your purchase receipt as proof of purchase.
Manufacturer: TRU COMPONENTS
