پروڈکٹ ختمview
The Festool SYS-AIR is a compact and powerful air filtration system designed to effectively capture airborne dust in workshops and job sites. It helps prevent dust from settling on surfaces, improving cleanliness and air quality. Its Systainer design makes it highly portable, and its two-stage filter system efficiently removes even the tiniest dust particles.
Figure 1: Festool SYS-AIR Air Filtration System with its main unit, preliminary filter, and main filter housing displayed separately.
کلیدی خصوصیات
- کمپیکٹ اور ہلکا پھلکا: Weighs 22 lbs (10 kg) in a Systainer³ M437 format, ideal for mobile use.
- Powerful Air Filtering: Provides up to 400 cfm (680 m³/h) airflow, circulating air in rooms up to 613 ft² (57 m²) for three full air changes per hour.
- سایڈست ہوا کا بہاؤ: Offers two airflow levels to adapt to varying dust conditions.
- Smart Airflow Dispersion: Air disperses upwards in three directions (left, right, back) to minimize dust disturbance and disruptive air currents.
- ابتدائی فلٹر: Captures larger dust particles, protecting the main filter. It is easy to replace and cost-effective.
- Efficient Main Filtration: Features a specially designed TripleV main filter with a large surface area, reducing clogging and extending its lifespan.
- Cleaner Work Environment: Achieves over 99.9% filtration for significantly cleaner air.
- سگنل لائٹ: Alerts users when filters are clogged or require replacement.
- کنکشن پورٹ: Includes a port for connecting a 7-7/8” (200 mm) air supply hose (accessory) for hard-to-reach areas or dust protection barriers.
- مطابقت: Connects easily to other Festool Systainers and extractors via T-LOC, and integrates into Systainer Systems vehicle racking systems.
سیٹ اپ
Before operating your Festool SYS-AIR, ensure proper setup for optimal performance and safety.
پیک کھولنا اور ابتدائی معائنہ
- Carefully remove the SYS-AIR unit and all components from its packaging.
- Verify that all included components are present: Main Filter HF-SYS-AIR, Preliminary Filter VF-SYS-AIR, and the SYS-AIR US unit.
- Inspect the unit for any signs of damage that may have occurred during shipping. Do not use the unit if it appears damaged.
فلٹر کی تنصیب
The SYS-AIR comes with a preliminary filter and a main filter. Ensure they are correctly installed before first use.
Figure 2: The Festool SYS-AIR unit, showcasing its compact Systainer design with top handle and side ventilation grilles.
- Open the filter compartment according to the instructions in the detailed manual (not provided here).
- Insert the Preliminary Filter VF-SYS-AIR into its designated slot.
- Install the Main Filter HF-SYS-AIR (TripleV filter) securely.
- Close the filter compartment, ensuring it is latched properly.
پلیسمنٹ اور پاور کنکشن
- Place the SYS-AIR on a stable, level surface in the area where air filtration is desired. Ensure adequate clearance around the unit for proper airflow.
- پاور کورڈ کو معیاری 120 وولٹ کے برقی آؤٹ لیٹ سے جوڑیں۔
آپریٹنگ ہدایات
Follow these steps to operate your Festool SYS-AIR effectively.
Figure 3: Close-up of the Festool SYS-AIR control panel, showing the power button, airflow settings, and filter status indicator light.
- پاور آن: یونٹ کو آن کرنے کے لیے کنٹرول پینل پر پاور بٹن دبائیں۔
- Select Airflow Level: Use the airflow control buttons to select between the two available airflow levels (e.g., low for general maintenance, high for active dust generation).
- Monitor Filter Status: Observe the signal light on the control panel. A steady light indicates normal operation. A flashing or changed color light indicates that filters may be clogged or require replacement.
- Optional Air Supply Hose: If needed, connect a 7-7/8” (200 mm) air supply hose (sold separately) to the designated connection port for directing filtered air to specific areas or creating dust protection barriers.
- بجلی بند: Press the power button again to turn off the unit when filtration is no longer needed.
دیکھ بھال
Regular maintenance ensures the longevity and efficiency of your Festool SYS-AIR.
فلٹر کی تبدیلی
- Preliminary Filter (VF-SYS-AIR): This filter captures most dust particles and should be checked and replaced regularly, especially when the signal light indicates reduced airflow or clogging. It is designed for easy and cost-effective replacement.
- Main Filter (HF-SYS-AIR - TripleV): The main filter has a large surface area to reduce clogging and extend its lifespan. Replace this filter when the signal light indicates it is clogged or when you notice a significant reduction in air purification effectiveness, even after replacing the preliminary filter.
Always refer to the detailed product manual for specific instructions on how to access and replace filters safely.
صفائی
- اشتہار کے ساتھ یونٹ کے بیرونی حصے کو صاف کریں۔amp کپڑا سخت کیمیکل یا کھرچنے والے کلینر کا استعمال نہ کریں۔
- Ensure air intake and exhaust vents are free from obstructions.
خرابی کا سراغ لگانا
This section addresses common issues you might encounter with your Festool SYS-AIR.
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Reduced Airflow / Unit Not Filtering Effectively | Clogged preliminary or main filter. Signal light is on. | Check and replace the preliminary filter. If the issue persists, replace the main filter. |
| یونٹ پاور آن نہیں ہے۔ | بجلی کی فراہمی نہیں ہے۔ | Ensure the power cord is securely plugged into a 120V outlet. Check the circuit breaker. |
| آپریشن کے دوران غیر معمولی شور | Obstruction in fan or motor. | Turn off and unplug the unit. Inspect for any foreign objects near the fan or vents. If noise persists, contact Festool support. |
For issues not listed here, please contact Festool customer support.
وضاحتیں
| وصف | تفصیل |
|---|---|
| کارخانہ دار | فیسٹول |
| آئٹم ماڈل نمبر | 577790 |
| شے کا وزن | 21.8 پاؤنڈ (9.9 کلوگرام) |
| پیکیج کے طول و عرض | 25.59 x 16.22 x 12.28 انچ (65 x 41.2 x 31.2 سینٹی میٹر) |
| رنگ | ملا ہوا |
| طاقت کا منبع | کورڈڈ الیکٹرک |
| والیومtage | 120 وولٹ |
| شامل اجزاء | Main Filter HF-SYS-AIR, Preliminary Filter VF-SYS-AIR, SYS-AIR US Unit |
وارنٹی اور سپورٹ
Festool products are known for their durability and precision. For specific warranty details and to register your product, please visit the official Festool webسائٹ یا آپ کی خریداری کے ساتھ شامل دستاویزات کا حوالہ دیں۔
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Festool customer service. You can find contact information on the official Festool webسائٹ: www.festool.com.
