FCOB SP530E WiFi Bluetooth LED Controller and COB LED Strip Light User Manual
Model: SP530E
1. تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of your FCOB SP530E WiFi Bluetooth LED Controller and accompanying 6000K Daylight White COB LED Strip Light. Please read this manual thoroughly before use to ensure proper functionality and safety.
2. حفاظتی معلومات
- بجلی کی فراہمی والیوم کو یقینی بنائیںtage matches the product specifications (24V). Incorrect voltage آلہ کو نقصان پہنچا سکتا ہے۔
- Do not expose the controller or LED strip to moisture or extreme temperatures.
- کوئی کنکشن بنانے یا دیکھ بھال کرنے سے پہلے بجلی منقطع کریں۔
- Avoid bending the LED strip sharply to prevent damage to the internal circuitry.
- بچوں کی پہنچ سے دور رکھیں۔
3. پیکیج کے مشمولات
تصدیق کریں کہ تمام اشیاء آپ کے پیکیج میں موجود ہیں:
- SP530E WiFi Bluetooth LED Controller
- 6000K Daylight White COB LED Strip Light (32.8FT)
- ڈی سی پاور کنیکٹر
- Mounting Clips and Screws
- چھوٹا سکریو ڈرایور
Image 3.1: Contents of the FCOB SP530E LED Controller and Strip Light kit, including the controller, COB LED strip, power connectors, mounting clips, and a screwdriver.
4. وضاحتیں
- کنٹرولر ماڈل: SP530E۔
- کنیکٹوٹی: WiFi, Bluetooth LE5.0
- ان پٹ جلدtage: DC 5-24V
- آؤٹ پٹ چینلز: 6-channel (PWM), SPI
- زیادہ سے زیادہ آؤٹ پٹ موجودہ: 10A
- کام کرنے کا درجہ حرارت: -20 ° C سے 60 ° C
- ایل ای ڈی پٹی کی قسم: COB ایل ای ڈی پٹی لائٹ
- ایل ای ڈی پٹی کی لمبائی: 32.8FT (10 meters)
- ایل ای ڈی کثافت: 320 LEDs/میٹر
- رنگ درجہ حرارت: 6000K دن کی روشنی سفید
- بیم زاویہ: 180°
- قابل کاٹنا: Every 1.97 inches (5cm) at marked lines
- ڈی سی پلگ سائز: 5.5 ملی میٹر x 2.1 ملی میٹر
5. سیٹ اپ اور انسٹالیشن
5.1 LED Strip Preparation
- پیمائش اور کٹ: If a shorter length is required, cut the COB LED strip only at the designated cutting marks (usually indicated by a scissor icon or copper pads).
Image 5.1: Illustration showing correct and incorrect cutting points for the LED strip. Always cut along the marked lines to ensure functionality.
- صاف سطح: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
- چھلکا اور چھڑی: Remove the backing from the adhesive tape on the back of the LED strip and firmly press the strip onto the desired surface.
- کلپس کے ساتھ محفوظ: For added security, use the provided mounting clips and screws, especially for longer runs or uneven surfaces.
5.2 Controller Wiring
The SP530E controller supports both PWM (non-addressable) and SPI (addressable) LED strips, including combined setups. Refer to the labels on the controller for correct wiring.
- PWM LED Strips (e.g., Monochrome, CCT, RGB, RGBW, RGBCCT): Connect the corresponding wires from your LED strip to the V+, R, G, B, CW, WW terminals on the controller. Ensure polarity is correct.
- SPI LED Strips (e.g., WS2811, WS2812B): Connect the Data (DAT) wire from your SPI strip to the DAT terminal on the controller. Connect the Ground (GND) wire to the GND terminal.
- پاور کنکشن: Connect the DC power adapter (not included) to the DC Power Jack Socket (5.5mm x 2.1mm) on the controller. Ensure the power supply is rated for 24V and has sufficient current capacity for your LED strips.
Image 5.2: The SP530E controller is compatible with various PWM and SPI LED strip types, including single color, CCT, RGB, RGBW, and RGBCCT configurations. The image also shows the associated mobile application interface.
6. آپریشن
6.1 کنٹرول کے طریقے
The SP530E controller offers multiple ways to manage your LED lighting:
- اے پی پی کنٹرول: Connect via 2.4GHz WiFi or Bluetooth LE5.0 using the dedicated mobile application (Banlanx APP). This allows for comprehensive control over colors, effects, brightness, and scheduling.
- 2.4G RF Remote / Smart Panel Control: Compatible with separately purchased 2.4G RF touch remotes or wall-mounted smart panels for convenient local control.
- تھرڈ پارٹی وائس کنٹرول: Integrate with smart home systems like Amazon Alexa or Google Home for voice-activated control (requires initial setup through the mobile app).
Image 6.1: Visual representation of the three primary control methods: mobile application, 2.4G RF remote/smart panel (sold separately), and third-party voice assistants like Amazon Alexa and Google Home.
6.2 Mobile Application (Banlanx APP)
Download the Banlanx APP from your device's app store. Follow the in-app instructions to pair your SP530E controller via WiFi or Bluetooth.
- متحرک موڈز: Choose from various pre-programmed dynamic lighting effects.
- ٹھوس رنگ: Select any static color from a color wheel or adjust white light temperature.
- موسیقی کے اثرات: Synchronize lighting with music using player streaming, mobile microphone, or the controller's built-in microphone.
- DIY اثرات: Create and customize your own lighting patterns and sequences.
- ٹائمر: Set schedules for turning lights on/off or activating specific modes.
- چمک ایڈجسٹمنٹ: Adjust the overall brightness level from 0% to 100%.
Image 6.2: Screenshots of the Banlanx mobile application, showcasing features such as dynamic modes, music synchronization, parameter settings, timers, and pattern customization.
Image 6.3: The SP530E controller's music effects feature, allowing synchronization of LED strip or matrix lighting with audio input from player streaming, mobile microphone, or the built-in microphone.
6.3 Brightness Dimming
The controller allows for precise brightness adjustment of the connected LED strips. This can be controlled via the mobile application, RF remote, or voice commands.
تصویر 6.4: ایک سابقہample of an LED strip installed in a living room setting, demonstrating various brightness levels (100%, 80%, 60%, 40%) achievable with the controller.
7 دیکھ بھال
- صفائی: Gently wipe the LED strip and controller with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- معائنہ: Periodically check connections for any signs of wear or damage.
- ذخیرہ: If storing the product for an extended period, ensure it is kept in a dry, cool environment away from direct sunlight.
8 خرابیوں کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| ایل ای ڈی کی پٹی روشن نہیں ہوتی ہے۔ | No power; incorrect wiring; faulty strip/controller | Check power supply connection; verify wiring polarity; test with another strip/controller if available. |
| Incorrect colors or effects | Incorrect strip type selected in app; wiring issue | Ensure correct LED strip type (PWM/SPI, RGB/CCT, etc.) is configured in the Banlanx APP. Recheck wiring. |
| Controller not connecting to app | WiFi/Bluetooth off; incorrect network; controller too far | Ensure WiFi/Bluetooth is enabled on your phone. Connect to a 2.4GHz WiFi network. Move closer to the controller. Reset controller if necessary (refer to app for reset procedure). |
| Strip sections not working after cutting | Cut at wrong location | Only cut at designated marks. Sections cut incorrectly cannot be repaired. |
9. وارنٹی اور سپورٹ
For warranty information and technical support, please refer to the FCOB official webسائٹ یا اپنے خوردہ فروش سے رابطہ کریں۔ خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید اپنے پاس رکھیں۔
