Antec VX320 ARGB ATX Mid Tower PC Case User Manual

1. تعارف

Thank you for choosing the Antec VX320 ARGB ATX Mid Tower PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning installation to ensure correct assembly and to maximize the performance and longevity of your system.

Image 1.1: The Antec VX320 ARGB Mid Tower PC Case, showcasing its design and ARGB lighting in a typical desktop setup.

2. کلیدی خصوصیات

• ہائی ایئر فلو ڈیزائن: Features a mesh front panel and multiple ventilation points for superior cooling performance.
• اے آر جی بی لائٹنگ: Equipped with four pre-installed ARGB fans (3 front, 1 rear) for customizable illumination.
• ٹیمپرڈ گلاس سائیڈ پینل: واضح فراہم کرتا ہے۔ view of internal components and enhances aesthetic appeal.
• وسیع مطابقت: Supports ATX, Micro-ATX, and Mini-ITX motherboards, along with ample space for GPUs and storage drives.
• User-Friendly I/O Panel: Conveniently located ports including USB 3.0, USB 2.0, and audio jacks.

Image 2.1: The VX320 ARGB case highlighting its unique design and effective heat dissipation capabilities through its ventilated front grille and tempered glass side panel.

تصویر 2.2: ایک تفصیلی view of the stylish mesh front panel, designed to maximize airflow for optimal cooling efficiency.

Image 2.3: Illustration of the high-airflow paths within the case, demonstrating how air intakes at the front contribute to efficient heat dissipation.

3. پیکیج کے مشمولات

Please verify that all items are present in the package before proceeding with installation:

• Antec VX320 ARGB ATX Mid Tower PC Case
• Pre-installed 120mm ARGB Fans (3 front, 1 rear)
• Accessory Box (screws, cable ties, standoffs)
• صارف دستی (یہ دستاویز)

4. سیٹ اپ اور انسٹالیشن

Follow these steps for proper installation of your components into the Antec VX320 ARGB PC Case.

4.1 کیس کی تیاری

1. کیس کو فلیٹ، مستحکم سطح پر رکھیں۔
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully sliding it off.
3. Remove the opposite metal side panel by unscrewing the thumb screws and sliding it off.

4.2 مدر بورڈ انسٹالیشن

1. کیس کے پچھلے حصے میں I/O شیلڈ (اگر آپ کے مدر بورڈ سے پہلے سے منسلک نہیں ہے) انسٹال کریں۔
2. Align your ATX, Micro-ATX, or Mini-ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's screw holes.
3. فراہم کردہ پیچ کے ساتھ مدر بورڈ کو محفوظ کریں۔

4.3 پاور سپلائی یونٹ (PSU) کی تنصیب

1. کیس کے نچلے حصے میں PSU بڑھتے ہوئے علاقے کو تلاش کریں۔
2. Slide your PSU into the designated bay from the rear of the case.
3. کیس کے باہر کے پیچھے سے پیچ کے ساتھ PSU کو محفوظ کریں۔

4.4 اسٹوریج ڈرائیو کی تنصیب

Refer to your specific drive type (2.5" SSD/HDD or 3.5" HDD) for appropriate mounting locations within the case.

4.5 گرافکس کارڈ اور ایکسپینشن کارڈ کی تنصیب

1. کیس کے عقبی حصے سے ضروری PCIe سلاٹ کور کو ہٹا دیں۔
2. اپنے گرافکس کارڈ یا دیگر توسیعی کارڈز کو مدر بورڈ کے PCIe سلاٹس میں داخل کریں۔
3. کارڈز کو پیچ سے محفوظ کریں۔

4.6 Connecting Front I/O Panel Cables

Connect the cables from the case's front I/O panel to the corresponding headers on your motherboard. These include:

• پاور سوئچ (PWR SW)
• سوئچ کو ری سیٹ کریں (RESET SW)
• Power LED (PLED +/-)
• HDD LED (HDD LED)
• USB 3.0 ہیڈر
• USB 2.0 ہیڈر
• HD Audio Header (AUDIO)
• LED Control Button (connects to ARGB controller or motherboard ARGB header)

Image 4.1: The front I/O panel, showing the location of USB 3.0, USB 2.0, audio jacks, LED control, reset, and power buttons. Ensure these are correctly connected to your motherboard.

4.7 Fan and ARGB Connections

The VX320 ARGB comes with four pre-installed ARGB fans. Connect their power cables to your motherboard's fan headers or a fan controller, and their ARGB cables to a compatible ARGB controller or motherboard ARGB header (5V 3-pin). The LED Control Button on the I/O panel can be used to cycle through ARGB effects if connected to the case's ARGB controller.

Image 4.2: The pre-installed fan configuration, featuring three 120mm ARGB fans at the front and one 120mm ARGB fan at the rear for balanced airflow.

Image 4.3: Fan mounting options, showing support for up to eight 120mm fans or various radiator configurations for enhanced cooling.

4.8 کیبل مینجمنٹ

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics.

4.9 کیس بند کرنا

Once all components are installed and cables are managed, reattach both side panels and secure them with the thumb screws.

5. آپریٹنگ ہدایات

5.1 پاور آن

Press the Power button on the front I/O panel to turn on your system. Ensure all external peripherals (monitor, keyboard, mouse) are connected.

5.2 ARGB لائٹنگ کنٹرول

The pre-installed ARGB fans can be controlled via the dedicated LED Control Button on the front I/O panel. Press this button to cycle through various lighting modes and colors. Alternatively, if the ARGB controller is connected to a compatible motherboard ARGB header, you can control the lighting using your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

6 دیکھ بھال

باقاعدگی سے دیکھ بھال بہترین کارکردگی کو یقینی بنانے میں مدد کرتی ہے اور آپ کے کمپیوٹر کے اجزاء کی عمر کو بڑھاتی ہے۔

• ڈسٹ فلٹر کی صفائی: Periodically remove and clean the dust filters (if present) to maintain optimal airflow and prevent dust buildup inside the case. Use compressed air or a soft brush.
• عمومی صفائی: ایک نرم استعمال کریں، ڈیamp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth.
• اندرونی دھول ہٹانا: Every few months, open the case and use compressed air to gently remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before performing internal cleaning.

7 خرابیوں کا سراغ لگانا

یہ سیکشن عام مسائل کو حل کرتا ہے جن کا آپ کو سامنا ہو سکتا ہے۔

• سسٹم آن نہیں ہوتا:
  • یقینی بنائیں کہ PSU آن ہے اور دیوار کے آؤٹ لیٹ سے مناسب طریقے سے جڑا ہوا ہے۔
  • تصدیق کریں کہ 24-پن ATX اور 8-پن CPU پاور کیبلز مدر بورڈ سے محفوظ طریقے سے منسلک ہیں۔
  • Check that the front panel Power Switch cable is correctly connected to the motherboard header.
• Fans Not Spinning or ARGB Not Lighting Up:
  • Ensure fan power cables are connected to appropriate headers (motherboard or fan controller).
  • Verify ARGB cables are connected to a 5V 3-pin ARGB header on the motherboard or the case's ARGB controller.
  • If using the LED Control Button, ensure it is connected to the ARGB controller.
  • اے آر جی بی کنٹرول سیٹنگز کے لیے مدر بورڈ سافٹ ویئر چیک کریں۔
• زیادہ گرمی کے مسائل:
  • Ensure all case fans are spinning correctly and oriented for optimal airflow (intake at front, exhaust at rear/top).
  • Clean any dust filters and internal components to prevent airflow obstruction.
  • Verify CPU cooler and GPU fans are functioning properly.

8. وضاحتیں

9. وارنٹی اور سپورٹ

Antec products come with a manufacturer's warranty. Please refer to the official Antec website or your regional distributor for specific warranty terms and conditions. For technical support, product inquiries, or warranty claims, please contact Antec customer service through their official channels.

Official Antec Webسائٹ: www.antec.com