ULANZI TT59 Horizontal Overhead Photography Tripod Instruction Manual

1. پروڈکٹ ختمview

The ULANZI TT59 is a versatile photography tripod designed for various shooting angles, including horizontal, vertical, and overhead perspectives. It features a robust aluminum construction, a professional-grade ball head with quick-release functionality, and a compact, travel-ready design. This manual provides detailed instructions for setting up, operating, and maintaining your TT59 tripod.

Figure 1: ULANZI TT59 Tripod showcasing its versatile configurations.

2. باکس میں کیا ہے۔

• تپائی x 1
• رنچ x 2۔
• اسٹوریج بیگ x 1

Figure 2: Included items with the ULANZI TT59 Tripod.

3. سیٹ اپ اور اسمبلی

3.1 Unfolding the Tripod Legs

1. Place the folded tripod on a flat surface.
2. Release the leg angle adjustment locks located at the top of each leg.
3. Extend each leg section by flipping open the quick-release levers. Adjust to desired height and secure the levers.
4. Adjust the leg angles to achieve stability on various terrains. The tripod offers multiple leg angle stops.

3.2 Attaching the Ball Head and Quick Release Plate

1. Ensure the ball head is securely screwed onto the tripod's center column.
2. Locate the Uka Quick-Release plate. Attach it to the bottom of your camera, phone holder, or camcorder using the 1/4" or 3/8" dual-thread screw.
3. Slide the quick-release plate with your device into the ball head's receiver until it clicks into place. Engage the safety lock for added security.

Figure 3: Demonstrating various shooting angles achievable with the TT59 tripod.

4. آپریٹنگ ہدایات

4.1 تپائی کی اونچائی کو ایڈجسٹ کرنا

The TT59 tripod features four leg sections and a two-stage center column, allowing it to extend up to 1.75m (68.9 inches). To adjust the height:

1. Loosen the quick-release levers on each leg section and extend the legs to the desired length. Secure the levers.
2. To extend the center column, loosen the locking knob at the base of the column and pull it upwards. Tighten the knob to secure.

Figure 4: ULANZI TT59 Tripod fully extended for maximum height.

4.2 Horizontal/Overhead Photography Setup

The TT59 allows for quick conversion to horizontal or overhead shooting modes:

1. Lift the center column to its maximum height.
2. Locate the pivot point at the base of the center column. Release the locking mechanism.
3. Rotate the center column 90 degrees to a horizontal position.
4. Adjust the angle and extension of the horizontal arm as needed and secure all locking knobs.

Figure 5: Steps for horizontal setup.

4.3 بال ہیڈ آپریشن

The panoramic ball head offers smooth 360° pan and 90° tilt movements:

• Loosen the main locking knob on the ball head to adjust the camera's angle.
• Use the panoramic base knob for 360° rotation.
• Tighten all knobs firmly once the desired position is achieved.

Figure 6: Ball head multi-angle control.

4.4 Enhancing Stability

For increased stability, especially in horizontal or extended setups, utilize the bottom hook on the center column to hang counterweights (e.g., a camera bag).

4.5 Monopod Functionality

One of the tripod legs can be detached and combined with the center column to form a monopod for quick, portable shooting.

4.6 Accessory Mounting

The tripod features standard 1/4" and 3/8" screw mounts for attaching various accessories like external monitors, microphones, or lighting.

5. دیکھ بھال اور دیکھ بھال

• Regularly clean the tripod legs and locking mechanisms with a soft, dry cloth to prevent dust and debris buildup.
• تپائی کو انتہائی درجہ حرارت یا سخت کیمیکلز کے سامنے لانے سے گریز کریں۔
• Store the tripod in its provided storage bag when not in use to protect it from scratches and impacts.
• Periodically check all screws and joints for tightness. Use the provided wrenches for any adjustments.

6 خرابیوں کا سراغ لگانا

6.1 تپائی عدم استحکام

• Ensure all leg sections and the center column are fully extended and their locking mechanisms are securely tightened.
• Verify that the leg angles are appropriately set for the terrain.
• Utilize the bottom hook to add counterweights for enhanced stability.

6.2 Stiff Ball Head Movement

• Loosen the main locking knob on the ball head sufficiently.
• Clean any dust or debris from the ball head mechanism.

7. وضاحتیں

Figure 7: ULANZI TT59 Tripod specifications.

8 آفیشل پروڈکٹ ویڈیوز

9. وارنٹی اور سپورٹ

For warranty information, product support, or to purchase additional accessories, please visit the official ULANZI webسائٹ یا ان کی کسٹمر سروس سے رابطہ کریں۔ وارنٹی کے دعووں کے لیے اپنی خریداری کی رسید اپنے پاس رکھیں۔

آپ خریداری پر بھی غور کر سکتے ہیں۔asing an extended protection plan for your product. Details on available plans can be found on the product's purchase page.