EPOMAKER Split70 Wireless Ergonomic Keyboard Instruction Manual

1. تعارف

The EPOMAKER Split70 is a 70% layout wireless ergonomic mechanical keyboard designed for comfort and customization. It features a unique split design, a programmable rotary knob, and tri-mode connectivity (Bluetooth 5.0, 2.4GHz wireless, and USB-C wired). This keyboard supports QMK/VIA for extensive key remapping and macro creation, and includes hot-swappable switches for personalized typing experiences. The gasket-mounted structure with five layers of padding ensures a quiet and satisfying acoustic profile, complemented by vibrant RGB backlighting.

2. پیکیج کے مشمولات

براہ کرم تصدیق کریں کہ تمام اشیاء آپ کے پیکیج میں موجود ہیں:

• EPOMAKER Split70 Keyboard (Left and Right Halves)
• USB-C سے USB-A کیبل (وائرڈ کنکشن اور چارجنگ کے لیے)
• USB-C to USB-C Interconnect Cable (for connecting keyboard halves)
• 2.4GHz Wireless Receiver (stored in the keyboard)
• کیکپ پلر
• سوئچ پلر
• اضافی سوئچز
• Mac Modifier Keycaps
• صارف دستی

3. سیٹ اپ

3.1 Connecting the Keyboard Halves

The two halves of the Split70 keyboard connect via a short USB-C to USB-C interconnect cable. Plug one end into the USB-C port on the left half and the other end into the corresponding port on the right half. The halves can also be magnetically attached for a unified layout.

3.2 وائرڈ کنکشن

1. Ensure the keyboard halves are connected using the interconnect cable.
2. Toggle the connectivity switch on the left keyboard half to the USB position.
3. Plug the provided USB-C to USB-A cable into the USB-C port on the left keyboard half and the USB-A end into your computer.
4. The keyboard backlight will illuminate, indicating a successful wired connection.

3.3 2.4GHz وائرلیس کنکشن

1. Ensure the keyboard halves are connected.
2. Toggle the connectivity switch on the left keyboard half to the 2.4G position.
3. اپنے کمپیوٹر پر دستیاب USB پورٹ میں 2.4G وائرلیس رسیور (ڈونگل) داخل کریں۔
4. The 'R' key indicator will flash until a connection is established, then it will stop flashing and return to the current backlight effect.

3.4 بلوٹوتھ کنکشن

The Split70 supports up to three Bluetooth devices.

1. Ensure the keyboard halves are connected.
2. Toggle the connectivity switch on the left keyboard half to the BT position.
3. پکڑو FN + Q/W/E until the light indicator flashes quickly. This prepares the keyboard for pairing with Bluetooth device 1 (Q), 2 (W), or 3 (E).
4. On your device (PC, Mac, Android Tablet), open Bluetooth settings and search for "Split70-1", "Split70-2", or "Split70-3" and connect.
5. Once connected, the light indicator will stop flashing and return to the current backlight effect.
6. جوڑا بنائے گئے بلوٹوتھ آلات کے درمیان سوئچ کرنے کے لیے، مختصر دبائیں۔ FN + Q/W/E.

4. آپریٹنگ ہدایات

4.1 بنیادی افعال

The Split70 keyboard features a programmable rotary knob and dedicated function keys for enhanced control.

• روٹری نوب: The knob on the left keyboard half can be rotated to adjust volume or other multimedia settings, and pressed to mute/unmute. Its function can be customized via VIA software.
• FN + بیک اسپیس: Reset the keyboard to factory settings.
• FN + A: Switch to Windows OS layout.
• FN + S: Switch to Mac OS layout (Mac modifier keycaps are included for replacement).
• FN + Win (Windows only): ونڈوز کی کو لاک/انلاک کریں۔
• FN + B: Battery Check.
• FN + Y: پرنٹ اسکرین۔
• FN + U: سکرول
• FN + I: توقف۔
• FN + H: گھر.
• FN + J: ختم
• FN + K: صفحہ اوپر۔
• FN + L: نیچے صفحہ.
• FN + حذف کریں: داخل کریں

4.2 RGB بیک لائٹ کنٹرول

The Split70 features customizable RGB backlighting and light strips.

• FN + X: Turn On/Off Backlight.
• FN + Tab: Toggle Backlight Effects.
• FN + \|: Toggle Light Strip Effects.
• FN + ↑/↓: Adjust Backlight Brightness.
• FN + ←/→: Adjust Backlight Effect Speed.
• FN + ;/: Adjust Backlight Saturation.
• FN + [{/]} : Adjust Backlight Hue.

4.3 One-Click Functions

The dedicated macro keys (M1-M4) on the left half can be programmed for one-click actions:

• M1: Ctrl + Z (Undo)
• M2: Ctrl + X (Cut)
• M3: Ctrl + C (Copy)
• M4: Ctrl + V (Paste)

5. Customization (QMK/VIA)

The EPOMAKER Split70 is fully customizable with QMK/VIA software, allowing you to remap keys, set macros, and configure lighting effects with maximum freedom.

1. وزٹ کریں۔ https://www.usevia.app/ to access the VIA web درخواست
2. Download the custom JSON file for the Split70 from the EPOMAKER official webسائٹ (epomaker.com) and load it into the VIA software.
3. Connect your keyboard via wired USB-C to your computer.
4. Configure your desired key layouts, macros, and lighting settings in real-time.

6 دیکھ بھال

6.1 کی کیپس اور سوئچز کو تبدیل کرنا

The Split70 features hot-swappable sockets, allowing you to easily change mechanical switches without soldering. Always ensure the keyboard is disconnected before performing maintenance.

1. کی کیپس کو ہٹا دیں: Use the included keycap puller to gently remove keycaps by pulling straight up.
2. سوئچ ہٹائیں: Use the included switch puller to grip the top and bottom clips of the switch and pull straight up.
3. سوئچز انسٹال کریں: Align the new 3-pin or 5-pin mechanical switch with the hot-swap socket on the PCB. Ensure the pins are straight and push the switch straight down until it clicks into place.
4. کی کیپس انسٹال کریں: Press the desired keycaps onto the new switches.

6.2 بیٹری چیک

موجودہ بیٹری کا فیصد چیک کرنے کے لیےtage, hold ایف این + بی۔. The backlight will illuminate from 1 to 0 keys, indicating the battery percentage (e.g., 6 keys lit means 60%). To check charging status, press and hold FN + اسپیس. A solid red FN indicator means charging, a green indicator means fully charged.

6.3 Wireless Sleep Mode

The backlight will turn off after 5 minutes of inactivity. Simply press any key to reactivate the lighting. The keyboard enters sleep mode after 30 minutes of inactivity, turning off the backlight and disconnecting from the device. Press any key to wake it up and reconnect.

7 خرابیوں کا سراغ لگانا

• رابطے کے مسائل: Ensure the correct mode (wired, 2.4G, or Bluetooth) is selected via the switch on the left keyboard half. For 2.4G, ensure the receiver is securely plugged in. For Bluetooth, ensure the keyboard is paired to the correct device slot (FN+Q/W/E).
• چابیاں جواب نہیں دے رہی ہیں: Try resetting the keyboard to factory settings by holding FN + بیک اسپیس. Ensure switches are properly seated if they have been replaced.
• بیک لائٹ کام نہیں کر رہی: Ensure the backlight is turned on (ایف این + ایکس۔). Check brightness levels (ایف این +۔).
• DFU (Firmware Update) Mode: To enter DFU mode for firmware updates, disconnect all cables from the keyboard. For the left half (with knob), hold ای ایس سی and plug in USB-C. For the right half (with arrow keys), remove the right Spacebar keycap and short-circuit PCB holes with tweezers, then plug in USB-C. Follow instructions on the QMK Toolbox.

8. وضاحتیں

9. وارنٹی اور سپورٹ

EPOMAKER products typically come with a manufacturer's warranty. For specific warranty details and to register your product, please visit the official EPOMAKER website. For technical assistance, product inquiries, or support, please contact EPOMAKER customer service directly.

سرکاری Webسائٹ: epomaker.com

ای میل سپورٹ: support@epomaker.com