Hobbywing Platinum 150A V5.1 ESC صارف دستی

1. تعارف

This manual provides essential instructions for the proper installation, operation, and maintenance of your Hobbywing Platinum 150A V5.1 Electronic Speed Controller (ESC). Please read this manual thoroughly before using the product to ensure safe and efficient operation.

2. حفاظتی احتیاطی تدابیر

• حادثاتی موٹر ایکٹیویشن کو روکنے کے لیے جب استعمال میں نہ ہو تو ہمیشہ بیٹری کو ESC سے منقطع کریں۔
• Ensure all wiring connections are secure and properly insulated to avoid short circuits.
• Never operate the ESC with damaged wires or connectors.
• ESC کو پانی، نمی اور انتہائی درجہ حرارت سے دور رکھیں۔
• Use only compatible batteries and motors as specified for the ESC.
• Mount the ESC in a location with adequate airflow to prevent overheating.
• Exercise caution when handling rotating propellers or moving parts of your RC model.

3 خصوصیات

The Hobbywing Platinum 150A V5.1 ESC incorporates advanced technology for optimal performance:

• اعلی درجے کی کولنگ: Features an innovative heat sink design that utilizes craft airflow for both external and internal ESC cooling, enhancing thermal management.
• سایڈست طاقت: Equipped with a built-in 12V Switch BEC, offering adjustable voltage output from 5V to 12V and a maximum output current of 35A to power various onboard electronics.
• پروٹوکول سپورٹ: Compatible with Mikado VBar System, Futaba S.BUS2, and other data return protocols, enabling remote parameter adjustment and real-time ESC status monitoring.
• DEO Technology: Integrates Driving Efficiency Optimization (DEO) technology, which enhances throttle response, improves flight stability, increases overall efficiency, extends battery life, and contributes to reduced ESC operating temperatures.

Image 1: The Hobbywing Platinum 150A V5.1 ESC, showcasing its integrated cooling fan, robust heat sink, and various wiring connections for battery, motor, and signal. The unit features a sleek black finish with clear branding and ampایریج کی درجہ بندی

4. پیکیج کے مشمولات

Please inspect the package contents upon receipt. Typically, the package includes:

• Hobbywing Platinum 150A V5.1 ESC
• صارف دستی (یہ دستاویز)
• Accessory cables and connectors (may vary)

اگر کوئی آئٹم غائب یا خراب ہے تو براہ کرم اپنے خوردہ فروش سے رابطہ کریں۔

5. سیٹ اپ

5.1 وائرنگ رابطے

1. موٹر کنکشن: Connect the three output wires from the ESC to the corresponding motor wires. For sensorless motors, the connection order may affect rotation direction; reverse any two wires to change direction if needed. For sensored motors, ensure the sensor cable is also connected correctly.
2. بیٹری کنکشن: Connect the ESC's power input wires (typically red for positive, black for negative) to your battery pack. Ensure correct polarity.
3. وصول کنندہ کنکشن: Plug the ESC's signal cable (usually a three-wire servo connector) into the throttle channel of your RC receiver.
4. بی ای سی آؤٹ پٹ: The built-in BEC provides power to your receiver and servos. Ensure your receiver and servos are compatible with the BEC's adjustable voltage (5-12V)۔

5.2 Throttle Range Calibration

Throttle range calibration is crucial for proper operation. Refer to your transmitter's manual for specific throttle stick positions. The general procedure is:

1. Turn on your transmitter and set the throttle stick to its maximum position.
2. Connect the battery to the ESC. The ESC will emit a series of beeps.
3. When the ESC indicates it has detected the maximum throttle position (specific beeps/LEDs, refer to full manual), move the throttle stick to the minimum position.
4. The ESC will then indicate detection of the minimum throttle position and arm itself, ready for use.

5.3 Parameter Programming

The Platinum 150A V5.1 ESC offers various programmable parameters. These can typically be adjusted via a dedicated programming box, a PC software interface, or through the transmitter stick programming method. Consult the detailed product manual for a complete list of parameters and programming instructions. Parameters include, but are not limited to, BEC voltage, timing, acceleration, and brake settings.

6. آپریٹنگ ہدایات

1. Ensure all connections are secure and the throttle is calibrated.
2. Turn on your transmitter first.
3. Connect the battery to the ESC. Wait for the ESC to initialize and arm (indicated by beeps/LEDs).
4. Slowly advance the throttle stick to begin motor operation.
5. Monitor the ESC and motor temperature during operation.
6. When finished, return the throttle stick to the minimum position.
7. Disconnect the battery from the ESC first, then turn off your transmitter.

7 دیکھ بھال

• صفائی: Regularly clean the ESC to remove dust, dirt, and debris, especially from the heat sink fins and cooling fan (if present). Use a soft brush or compressed air.
• معائنہ: Periodically inspect all wires, connectors, and the ESC casing نقصان، پہننے، یا سنکنرن کے کسی بھی نشان کے لیے۔
• ذخیرہ: ESC کو خشک، ٹھنڈے ماحول میں، براہ راست سورج کی روشنی اور انتہائی درجہ حرارت سے دور رکھیں۔
• فرم ویئر اپ ڈیٹس: Hobbywing چیک کریں website for any available firmware updates for your ESC model. Updates can improve performance and add new features.

8 خرابیوں کا سراغ لگانا

9. وضاحتیں

10. وارنٹی اور سپورٹ

Hobbywing products are covered by a manufacturer's warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or service, please contact your local Hobbywing distributor or visit the official Hobbywing webرابطے کی معلومات اور معاون وسائل کے لیے سائٹ۔