ایلیٹیک RC-4 پرو ڈیجیٹل ٹمپریچر ڈیٹا لاگر
پروڈکٹ ختمview اور ظاہری شکل
RC-4 Pro is a recorder used for recording temperature and humidity data during the transportation of food, drugs, chemicals, and other products. It is widely used in various transportation links such as warehousing and logistics, such as containers, refrigerated trucks, refrigerated containers, cold storage, and so on. By using a single button to start/stop recording, you can flip through pages to view various interfaces. Powered by a Single CR2450 battery for easy replacement, Transfer data to the “Jingchuang Data Center” management software through the Type-C interface. And the software can export files فارمیٹس میں جیسے کہ PDF، EXCEL، TXT، وغیرہ۔
پروڈکٹ ختمview
- ایئر وینٹ
- LCD اسکرین
- بیرونی تحقیقات
- کیپیڈ۔
- بزر
- Type-CC interface
- لٹکنے والی رسی کا سوراخ
- سامان کا نام پلیٹ
- بیٹری کور
تکنیکی پیرامیٹرز
آپریٹنگ ہدایات
Activate the recorder
ریکارڈر پر موصلیت کی شیٹ اور پاور کو ہٹا دیں۔
Install sensors (according to actual needs)
Install sensors according to the requirements, and configure them through the Jingchuang Data Center before enabling the external probe function.
سافٹ ویئر انسٹال کریں۔
Please download and install the Jingchuang Data Center software through www.elitechlog.com۔.
پیرامیٹرز کو ترتیب دیں۔
Connect the recorder to the computer via a USB cable and wait 
until the symbol appears on the screen. Software configuration: If you do not need to modify the default parameters, please click on the Summary menu> Quick Reset button. Can synchronize local time; if there is a need to modify parameters, please click on the Configure Device menu, change parameters, and click Save Parameters to complete the configuration.
نوٹ! To avoid time/time zone errors, please be sure to click on the quick reset or save parameters before first use or after replacing the battery to ensure that the local time is configured in the recorder. Exceeding the limit and shortening the recording interval parameter: By default, to is prohibited; If changed to allow, the recording interval will be automatically shortened to once every 1 minute after the humidity exceeds the limit.
ریکارڈنگ شروع کریں۔
Press and hold the button for 5 seconds to activate the recording, and the symbol 
appearing on the screen indicates successful activation.
نوٹ! The continuous flashing of the symbol indicates that the recorder is set with a startup delay. It will start recording after the end of the delayed startup.
Pause the recording
Click the button, and when the Log interface appears, double-click the button. When a symbol 
appears on the screen, it represents a pause in recording.
نوٹ! The pause function can only be used after being configured through the data center software.
ریکارڈنگ بند کرو
Stop recording: Press and hold the button for 5 seconds, and the symbol
appearing on the screen indicates a successful stop.
نوٹ! The stopping method can be configured through the data center software.
ڈیٹا ڈاؤن لوڈ کریں
Connect the recorder to the computer via a USB cable and wait until the symbol سکرین پر ظاہر ہوتا ہے.
ڈیٹا سینٹر: The data will be automatically uploaded. Click the export button to select the file format to export the report; If it is not automatically uploaded, please manually click the download button and repeat the operation.
USB ڈرائیو: directly export the corresponding report file.;
دوبارہ استعمال کریں۔
ریکارڈر کو کمپیوٹر سے جوڑنا بند کریں، ڈیٹا/رپورٹس کو محفوظ کریں یا برآمد کریں، اور اقدامات کو دہرائیں 4. پیرامیٹرز کو ترتیب دیں اور 5. ریکارڈنگ شروع کریں۔
نوٹ! After saving the parameters, the recorded historical data will be cleared. If you forget to save/export data, you can view and manage it
The device accessed ice through the historical data menu of the data center software.
حیثیت کا اشارہ
Functions of the keypad
مین اسکرین
- بیٹری کی سطح
- رک گیا۔
- ریکارڈنگ
- USB منسلک ہے۔
- Upper and llower limits
- بزر سوئچ
- Recording groups
- مہینہ
- زیادہ سے زیادہ قدر
- کم سے کم قدر
- تاریخ
- اوسط قدر
- ڈیٹا ایریا
- پرسنtage
- ڈیٹا یونٹ
بیٹری کی سطح
نوٹ: When the battery level is less than 10%, please replace the battery as soon as possible.
بیٹری کی تبدیلی
- بیٹری کور کھولیں۔
- پرانی بیٹری کو ہٹا دیں۔
- Install a new CR2450 battery and place it in the battery compartment
- بیٹری کور بند کریں۔
مصنوعات کی فہرست
- ریکارڈر × 1
- USB ڈیٹا لائن × 1
- بیرونی درجہ حرارت کی جانچ × 1
- 3V بٹن کی بیٹری (CR2450) x 1
احتیاطی تدابیر
- Please store the recorder in a room-temperature environment.
- When using the recorder for the first time, please make sure to use the Jingchuang Data Center software for the parameter configuration to synchronize system time.
- Please do not remove the battery during the recording process of the recorder.
- If there is no button operation for 15 seconds, the recorder will automatically turn off the screen. Click the button to reset the battery screen.
- After each parameter reconfiguration of the recorder, the previously recorded data will be cleared. Please export the data before saving the parameters;
- To ensure humidity accuracy, please avoid contact with unstable chemical solvents or other chemical substances, especially avoid long-term presence or exposure to high concentrations of ketones, acetone, ethanol, isopropanol, toluene, and other environments.
- The battery symbol on the screen is below one square (
). Please do not use it for long-distance transportation - Propylene glycol liquid is used inside the probe of the gel bottle to simulate the temperature change inside the vaccine, which is more suitable for medical use scenarios.
دستاویزات / وسائل
 |
ایلیٹیک RC-4 پرو ڈیجیٹل ٹمپریچر ڈیٹا لاگر [پی ڈی ایف] یوزر مینوئل RC-4 پرو، RC-4H پرو، RC-4 پرو ڈیجیٹل درجہ حرارت ڈیٹا لاگر، ڈیجیٹل درجہ حرارت ڈیٹا لاگر، درجہ حرارت ڈیٹا لاگر، ڈیٹا لاگر |