دھند تک رسائی کی یقین دہانی
وائرڈ سوئچ
ورژن 1.0
مسٹ ایکسیس ایشورنس وائرڈ سوئچ
❖ This manual explains “Wired Switch Configuration.”
❖ The procedures were verified using Mist Cloud as of September 2025.
If the screen display differs from the actual screen, please refer to the update information below.
https://www.juniper.net/documentation/us/en/software/mist/product-updates/latest.html
❖ Settings and parameters may vary depending on the deployment environment and configuration.
For details on various settings, please see the links below.
دھند دستاویزی
جونیپر مسٹ ایکسیس ایشورنس گائیڈ
❖ Many other Mist Japanese manuals are available on the “Solutions & Technical Information Site.”
https://www.juniper.net/jp/ja/local/solution-technical-information/mist.html
❖ The contents of this document are current as of the time of writing and are subject to change without notice.
Furthermore, the configurations and features described in this document cannot be purchased as a condition of their provision.
❖ The company names, product names, and logos mentioned in this document are trademarks or registered trademarks of their respective companies.
تاریخ
| ورژن | Updated date | ختمview |
| Ver 1.0 | ستمبر 2025 | پہلا ایڈیشن |
Wired – Switch
سوئچ کنفیگریشن
Set [Authentication Servers] to [Mist Auth], configure IEEE802.1X authentication-related settings in [Port Profiles], specify the port in [Port IDs] under [Port Configuration], and specify the profile you created in [Configuration Profile].
Switch Templates: Create Template
1. From [Organization], click [Switch Templates].
2. Click [Create Template], enter a name for the template in [Template Name], and click [Create].
3. Under [Authentication Servers], select [Mist Auth] and configure other options.
4. Under Port Profiles, click Add Profile
5. Set [Name], check [Use dot1x authentication], and set the required items.
5.(a) 802.1X Authentication: Check [Use dot1x authentication] (required).
Set other options.
[Use dot1x authentication]
Switch Templates: Port Profiles 802.1X
| اختیارات | تفصیل |
| Allow Multiple Supplicants | Check this box to allow multiple supplicants on the same port. |
| متحرک VLAN | Check [Dynamic VLAN] to dynamically assign VLANs. Click [+] to add a network. *Networks are configured separately. |
| Use Guest Network | Check [Use Guest Network] to authenticate to the guest network. Select a guest network from the drop-down list. |
| Bypass authentication when server is down | Check this box to allow clients to access the network without authentication if the server is down. |
| Reauthentication Interval | Set the reauthentication interval (10-65535 default: 65000). |
| Server Reject Network | To connect users to a specified VLAN (such as a guest network) if the authentication server rejects user authentication attempts, select [Server Reject] for [Network]. |
| Server Fail Network | To connect users to a specified VLAN (such as a guest network) if the authentication server is unreachable or unresponsive, select [Server Fail] for [Network]. |
حوالہ: کنفیگریشن کے اختیارات کو سوئچ کریں۔ > Table 4: Port Profile کنفیگریشن کے اختیارات
Switch Templates: Port Profiles MAB
5.(b) MAB Authentication: Check [Use dot1x authentication] and [Mac authentication] (required).
Set other options.
Check [Use dot1x authentication]
Check [Mac authentication]
If dot1x authentication is attempted and fails, a MAB connection attempt (fallback) will be performed.
Check [Mac authentication only] to immediately attempt a MAB connection without attempting dot1x authentication.
Select an [Authentication Protocol] (None/pap/eap-peap/eap-md5).
The supplicant will present credentials using the specified authentication protocol.
| اختیارات | تفصیل |
| Allow Multiple Supplicants | Check this box to allow multiple supplicants on the same port. |
| متحرک VLAN | To dynamically assign VLANs, check [Dynamic VLAN]. Click [+] to add a network. *Networks are configured separately. |
| توثیق پروٹوکول | Select an Authentication Protocol (None/pap/eappeap/eap-md5). The supplicant will present its credentials using the specified authentication protocol. |
| Use Guest Network | Check [Use Guest Network] to authenticate to the Guest Network. Select [Guest Network] from the drop-down list. |
| Bypass authentication when server is down | If checked, clients can access the network without authentication if the server is down. |
| Reauthentication Interval | Set the re-authentication interval (10-65535 default:65000) |
| Server Reject Network | To connect users to a specified VLAN (such as a guest network) if the authentication server rejects their authentication attempt, select [Network] for [Server Reject]. |
| Server Fail Network | To connect users to a specified VLAN (such as a guest network) if the authentication server is unreachable or does not respond, select “Network” for “Server Fail Network.” |
حوالہ: کنفیگریشن کے اختیارات کو سوئچ کریں۔ > Table 4: Port Profile کنفیگریشن کے اختیارات
Switch Templates: Select Switches Configuration > Port Configuration
6. Click [Add Rule] under [Select Switches Configuration], set [Name] on the [Info] tab, and specify the target device by [Applies to name], [Applies to switch role], or [Applies to switch model].
7. Click the Port Config tab and click Add Port Configuration.
Specify the interface to which the configuration applies in Port IDs, and select the profile you created in Configuration Profile.
Click to complete the Port Configuration settings, and click to complete the Rule settings.
Switch Templates: Assign to Sites / Save
8. Under [Applies to Sites], click [Assign to Sites], Select the sites to which you want to apply the template from [+] (multiple selections are possible), Click [Add], and then click [Apply].
9. Complete the Switch Template settings in [Assign to Sites].
Per Switch Configuration
1. From [Switches], select the switch you want to configure.
2. Select [Mist Auth] under [Authentication Servers] and configure other options.
3. Under Port Profiles, click Add Profile
4.(a) Port Profile: 802.1X Authentication
4.(b) Port Profile: MAB Authentication
5. Under Port Configuration, click Add Port Configuration. Specify the interface to which the configuration applies under Port IDs, and select the profile you created under Configuration Profile. کلک کریں۔
6. Click [Save] to complete the settings.
You can configure these settings in any of the following locations:
- Organization > Switch Templates > {Template}
- Site > Switch Configuration > {Site}
- Switches > {Switch}
For manageability and scalability, configuring settings in Switch Templates is recommended.
You can also combine these settings by configuring the Network and Port Profile in the Switch Template and the Port Configuration on individual switches.
پورٹ پروfile/Client Info
نوٹ
Select the switch in question from Switches and hover your mouse over the port to view information about it, including the authentication method.
آپ کا شکریہ
دستاویزات / وسائل
 |
Juniper Networks Mist Access Assurance Wired Switch [پی ڈی ایف] یوزر گائیڈ Mist Access Assurance Wired Switch, Assurance Wired Switch, Wired Switch |